2019 TOYOTA 4RUNNER engine

21
OVERVIEW
FEATURES & OPERATIONS
SAFETY & EMERGENCY FEATURES
NOTE: The 120V AC power outlet can only be used when engine is running.
ON/OFF Main switch
Push
Luggage compartment
Multi-Information Display (MID)
Refer to the Owner’s Manual for more settings and customizable features.
Eco Driving Indicator Zone
Outside temperatureMulti-terrain Select display*Ice indicatorTrip information
Driving monitor/ Warning messages/ Multi-terrain Select messages*
Compass*
The multi-information display presents the driver with a variety of driving-related
data. Items displayed can be switched by pressing the “DISP” switch.
* If equippedDisplay
“DISP” switch
Power outlets-120V AC (if equipped)
114558_MY19_4Runner_QRG_V3_ML_0712_R1.indd 217/13/18 8:21 PM

22
NOTE: Designed for car accessories. Ignition switch/“ENGINE START STOP”
switch must be in the “ACC” or “ON” position to be used.
Outside
With 120V AC outletWithout 120V AC outlet
Inside
FEATURES & OPERATIONS
Power outlets-12V DC
CENTER PANEL
CONSOLE BOX
LUGGAGE COMPARTMENT
114558_MY19_4Runner_QRG_V3_ML_0712_R1.indd 227/13/18 8:21 PM

26
FEATURES & OPERATIONS
Multi-terrain select
Mode selector dial
Multi-terrain Select modes
The Multi-terrain Select system has 4 terrain modes. When a terrain mode is
selected in accordance with terrain conditions, engine power and active traction
control system is controlled to enhance off-road drivability.
Additionally, guidance messages such as transfer mode selection advice are
displayed on the multi-information display to assist the driver in operating the
vehicle.
Refer to the Owner‘s Manual for limitations and more details on this system before
attempting to use it.
Refer to the Owner‘s Manual for limitations and more details on this system before
attempting to use it.
Crawl Control
Speed selector dial
LoHi
ROCK
Med
Lo-Med
MUD & SAND
LOOSE ROCK
Med-Hi
MOGUL
Speed modes
Crawl Control allows travel on extremely rough off-road surfaces at a fixed low
speed without pressing the accelerator or brake pedal. Operating status displays
on the MID.
Lo to Lo-Med - Rock, mogul (downhill) and gravel (downhill)
Lo-Med to Med - Mogul (uphill)
Med-Hi - Snow, mud, gravel (uphill), sand, dirt, mogul (uphill) and grass
114558_MY19_4Runner_QRG_V3_ML_0712_R1.indd 267/13/18 8:22 PM

30
SAFETY & EMERGENCY FEATURES
Star Safety System™
VEHICLE STABILITY CONTROL (VSC)
VSC helps prevent loss of traction during cornering by reducing engine power and
applying brake force to selected wheels.
Toyota’s VSC monitors steering angle and the direction your vehicle is traveling.
When it senses that the front or rear wheels begin to lose traction, VSC reduces
engine power and applies braking to selected wheels. This helps restore traction
and vehicle control.
ANTI-LOCK BRAKE SYSTEM (ABS)
Toyota’s ABS sensors detect which wheels are locking up and limits wheel lockup
by “pulsing” each wheel’s brakes independently. Pulsing releases brake pressure
repeatedly for fractions of a second. This helps the tires attain the traction that
current road conditions will allow, helping you to stay in directional control.
BRAKE ASSIST (BA)
Brake Assist is designed to detect sudden or “panic” braking, and then add braking
pressure to help decrease the vehicle’s stopping distance. When there’s only a split
second to react, Brake Assist can add additional brake pressure more quickly than
just the driver alone can.
ELECTRONIC BRAKE FORCE DISTRIBUTION (EBD)
Toyota’s ABS technology has Electronic Brake-force Distribution (EBD) to help
maintain control and balance when braking. EBD responds to sudden stops by
redistributing brake force to enhance the braking effectiveness of all four wheels.
Your vehicle comes standard with the Star Safety SystemTM, which combines Anti-
lock Braking System (ABS), Brake Assist (BA), Electronic Brake-force Distribution
(EBD), Smart Stop Technology (SST), Traction Control (TRAC) and Vehicle Stability
Control (VSC).
Refer to the Owner’s Manual for more details and important information on limitations
to these systems.
SMART STOP TECHNOLOGY (SST)
Smart Stop Technology automatically reduces engine power when the accelerator
and brake pedals are pressed simultaneously under certain conditions.
SST engages when the accelerator is depressed first and the brakes are applied
firmly for longer than one-half second at speeds greater than five miles per hour.
SST doesn’t engage if the brake pedal is depressed before the accelerator pedal,
allowing vehicles to start on a steep hill and safely accelerate without rolling
backward.
114558_MY19_4Runner_QRG_V3_ML_0712_R1.indd 307/13/18 8:22 PM

31
OVERVIEW
FEATURES & OPERATIONS
SAFETY & EMERGENCY FEATURES
Floor mat installation
TRACTION CONTROL (TRAC)
VSC helps prevent loss of traction during cornering by reducing engine power, and
Traction Control helps maintain traction on loose gravel and wet, icy, or uneven
surfaces by applying brake force to the spinning wheel(s).
Toyota’s TRAC sensors are activated when one of the drive wheels starts to slip.
TRAC limits engine output and applies the brakes to the spinning wheel. This
transfers power to the wheels that still have traction to help keep you on track.
There are two types of Toyota floor mats: carpeted and all-weather. Each vehicle
has model-specific floor mats. Installation is easy.
To keep your floor mat properly positioned, follow these steps:
• Only use Toyota floor mats designed for your specific model.
• Use only one floor mat at a time, using the retaining hooks to keep the mat in
place.
• Install floor mats right side up.
Always align the Δ marks
114558_MY19_4Runner_QRG_V3_ML_0712_R1.indd 317/13/18 8:22 PM