2019 SUBARU WRX center console

4
Seating
Seat Controls
Do not adjust the seat while driving.
1 Forward/Backward

Pull up on the lever below the front
of the driver’s seat to move the seat
forward or backward.
2 Raise/Lower Seat Cushion

To adjust the height of the driver’s
seat, pull up or push down the seat
height adjustment lever, located on the lower left side front of the seat.
3 Recline Seatback

To adjust the seatback to the desired position, pull up on the recline lever, located on the
lower left rear of the driver’s seat or lower right rear of the passenger’s seat.
1
32
Heated Seats (if equipped)
The switches are located on the center console between the driver and passenger seats. \
Choose low (bottom of switch) for normal heating or high (top of swit\
ch) for rapid heating.
Choose the center position to turn off the seat heaters.
3572136_19b_WRX_WRX_STI_QG_061118.indd 46/11/18 5:06 PM

16
USB Port
The USB port is located in the center console.
You can connect a USB-equipped portable music
player to the USB port and hear the music stored
on it through the vehicle speakers. Press the
“SOURCE” button located on the audio system
repeatedly until the USB mode is selected.
Auxiliary Input Jack
The 3.5mm auxiliary input jack is located in the center console. You can\
connect a portable
music player to the auxiliary jack and hear the music stored on it throu\
gh the vehicle speakers.
Press the “SOURCE” button located on the audio system to select th\
e auxiliary mode.
Controls
Steering Wheel Audio Controls
Voice recognition switch;
please refer to your Starlink Owner’s Manual. Press the button
to turn audio
ON/OFF or to
select the
cursor entry.
Press the button
to return to the
previous screen.
Press the button to select the
desired audio mode – FM, AM,
SXM, CD, AUX, MEDIA. With any of the radio modes
selected, push the switch left or
right to toggle through your presets.
In CD mode, push the switch left or
right to skip forward or back a track.
Push the top (+) of
the switch to increase
volume or the bottom
(–) of the switch to
decrease volume. Press the
button to show
the list screen.
3572136_19b_WRX_WRX_STI_QG_061118.indd 166/11/18 5:07 PM

23
Driver Control Center Differential (DCCD)
(WRX STI only)
This electronically controlled system
adjusts the power-distribution ratio
between the front and rear wheels.
The system is designed to provide
optimum differential control for
improved vehicle cornering, stability,
and handling control to suit driving and
road surface conditions. The DCCD
can be operated automatically or
manually. When the system is in the
automatic mode, the “AUTO” indicator
light in the combination meter comes
on. The DCCD can be taken out of
“AUTO” mode and used manually by
pressing the “AUTO MANU” switch
located on the center console. Use the
DCCD control switch located on the
center console for manual operation. Pressing the “AUTO MANU” switch
again will return the system to “AUTO”
mode. When using the system
manually, if the control switch is set
closer to or at the “Lock” position,
the powertrain may make a vibration
or noise when the vehicle is in tight
turns at slow speeds (system binding).
In addition, if the rear differential
oil exceeds a certain temperature,
the DCCD will automatically cancel
the current torque-distribution ratio
setting and adopt its minimum ratio.
SI-Drive (WRX STI only)
Turn the selector toward S for Sport mode or toward S# for Sport Sharp mode.
Press down on the selector for Intelligent mode.
While
Operating
3572136_19b_WRX_WRX_STI_QG_061118.indd 236/11/18 5:08 PM
Getting
Started Instrument
Panel Gauges
Personalize ControlsWhile
Operating Safety/In Case
of Emergency Additional
Information