2019 SUBARU FORESTER instrument panel

Table of Contents
2-5 Getting Started

6-7 Instrument Panel

8-9 Gauges

10-11 Personalize

12-19 Controls

20-23 While Operating

24-25 Safety/In Case of Emergency

26-28 Additional Information
3495150_19a_Subaru_Forester_QRG_070318.indd 57/3/18 1:05 PM

3
Power Driver’s Seat (if equipped)
Do not adjust the seat while driving.
1 Forward/Backward,
Angle and Height

Move the switch toward the front
or rear to move the seat forward
or backward. Pull up or push
down on the front of the switch
to adjust the angle of the seat
cushion. Pull up or push down on
the rear of the switch to adjust the
height of the entire seat cushion.
2 Seatback
Move the switch in the
corresponding direction to adjust
the angle of the seatback.
3 Lumbar Support

Press the front part of the switch
to increase lumbar support;
press the rear part of the switch
to decrease lumbar support.
Getting
Started
Memory Driver’s Seat (if equipped)
While pressing the “SET” button, press and hold the desired button
“1” or “2”. A beep sounds when the seat position is registered.
Press button “1” or “2” to retrieve the seat positions.
Seating
3
2
1
3495150_19a_Subaru_Forester_QRG_070318.indd 37/3/18 1:06 PM
Getting
Started Instrument

Panel Gauges
Personalize ControlsWhile

Operating Safety/In Case

of Emergency Additional

Information

5
Folding the Rear Seat
Lower the headrests. Pull up on the release
knob on the seat side that you want to fold
down. To return the seatback to its original
position, raise the seatback until it locks into
place, making sure that it is securely locked.
If equipped, release latches are located on either
side of the cargo area. Pull the release latch on
the seat side that you want to fold down.
Getting
Started
3495150_19a_Subaru_Forester_QRG_070318.indd 57/3/18 1:06 PM
Getting
Started Instrument

Panel Gauges
Personalize ControlsWhile

Operating Safety/In Case

of Emergency Additional

Information

6
Instrument Panel
8-9PAGE
NUMBER18 1012, 20
3495150_19a_Subaru_Forester_QRG_070318.indd 67/3/18 1:06 PM

7
Instrument Panel
14-17
19
Instrument
Panel
3495150_19a_Subaru_Forester_QRG_070318.indd 77/3/18 1:06 PM
Getting
Started Instrument

Panel Gauges
Personalize ControlsWhile

Operating Safety/In Case

of Emergency Additional

Information

9
Gauges
Speedometer
Trip meter and odometer
Auto Vehicle Hold operation
Vehicle Dynamics Control/
Vehicle Dynamics Control
operation
Vehicle Dynamics Control OFF
CHECK ENGINE/
Malfunction indicator
Tire pressure warning light
Front passenger airbag ON
(Located on center console)
Front passenger airbag OFF (Located on center console)
Pre-Collision Braking
System OFF light
Lane Departure Warning OFF light
Auto Vehicle Hold ON
Turn signals
Front fog light indicator
light (if equipped)
Headlight indicator light
3495150_19a_Subaru_Forester_QRG_070318.indd 97/3/18 1:06 PM
Getting
Started Instrument

Panel Gauges
Personalize ControlsWhile

Operating Safety/In Case

of Emergency Additional

Information

11
Power Exterior Mirrors
Turn the knob to the “L” side to adjust the left-hand mirror or to the “R” side to
adjust the right-hand mirror. Move the knob in the direction you want to move the
mirror. Then return the knob to the neutral/center position.
Power Moonroof (if equipped)
With the moonroof in the fully closed position, press the switch 1 to fully open
the moonroof. Press the switch
2 to close the moonroof. To stop the moonroof
in a midway position while opening or closing, momentarily press the switch to the
1 side or 2 side.
1
2
Personalize
HomeLink® 5 Accessory Mirror (if equipped)
The HomeLink 5 accessory mirror
provides three buttons to replace up
to three hand-held radio frequency
remotes used to activate devices
such as garage door openers,
gate openers, entry door locks,
security systems and home lighting.
Please see your Owner’s Manual for
programming instructions or visit
www.subaru.com/homelink to
view a how-to video.
3495150_19a_Subaru_Forester_QRG_070318.indd 117/3/18 1:07 PM
Getting
Started Instrument

Panel Gauges
Personalize ControlsWhile

Operating Safety/In Case

of Emergency Additional

Information

12
Controls
While the light switch is on, rotate the dial downward to dim the instrument panel illumination. Rotate the dial upward to make the illumination brighter. When the dial is fully rotated upward
(dots aligned), the instrument panel illumination stays at full bright\
ness.
Light Controls

Turns on instrument panel
lights, tail lights, parking lights
and license plate lights.
Turns on headlights, instrument
panel illumination, parking lights,
tail lights and license plate lights.
Rotate to
turn on
fog lights
(if equipped).AUTO: The vehicle’s lights are
automatically on or off, depending
on the level of outside light.
Push forward to change from low
beam to high beam. Pull the lever
back to center to return to low beam.
Push slightly down
for lane change
or fully down for
left turn signal.
Push slightly up
for lane change
or fully up for
right turn signal.
3495150_19a_Subaru_Forester_QRG_070318.indd 127/3/18 1:07 PM