Page 86 of 186
Change to another device / connection type
Infotainment allows you to switch between currently
connected devices and the connection type.
Page 88 of 186
Infotainment AmundsenInfotainment overviewATouchscreenAll menusFavourite menusIncrease the volumeDecrease the volumeCondition-based:
Page 99 of 186
Settings
The following Infotainment functions are set in the menu.
Page 105 of 186
Quick connection of Infotainment with the mobile
device hotspot
Page 112 of 186
Switch 2D/3D map display
Zoom into the map
Zoom out of the map
Rotate the map
Restriction
Infotainment may give incorrect driving recommen-
dations if the road conditions or the traffic do not
match the navigation data. This can lead to the route
guidance being carried out using a di
Page 128 of 186
Narrow or staggered vehicle
ACC detects a narrow or staggered vehicle only
when it is in the area covered by the radar.
Lane change by another vehicle
A vehicle that changes to the lane a short distance
away may not be recognized by the ACC in time.
Stationary vehicle
If a vehicle in front turns and there is a stationary ve-
hicle in front of this vehicle, the ACC will not respond
to the stationary vehicle.
Vehicles with special load or special bodies
A load or superstructure that protrudes outside the
vehicle might not be detected by the ACC.
Settings
In the infotainment system, in menu:
Page 131 of 186
Park Assist systems
Park Pilot parking aid Functionality
If an obstacle is detected, the Infotainment will dis-
play a visible message and an audible signal will
sound. The interval between the signals becomes
shorter as the clearance is reduced. At a distance of
less than 30 cm from the obstacle, a continuous tone
sounds.
If the driver does not respond to the warning, the
system triggers automatic emergency braking at
speeds below 8 km/h in order to reduce the impact.
Automatic braking can be activated and deactivated
in the infotainment.
Display
The recorded areas vary according to the equipment.
ARoute controlled at the current steering angleAcoustic signals on/o
Page 132 of 186
Rear view camera
Functionality
When reversing, the area behind the vehicle is dis-
played in the Infotainment screen complete with ori-
entation lines.
The camera is equipped with a cleaning system.
Cleaning takes place automatically when the rear
window is washed.
Orientation lines and functional surfaces
Orientation lines
ADistance about 40 cmBDistance about 100 cmCDistance about 200 cm
The distance between the side lines corresponds ap-
proximately to the vehicle width including mirrors.
Function surfaces
Brightness, contrast and colour settings of the
screenTurns o