2019 SKODA RAPID SPACEBACK key

Deactivating the front passenger airbagFig. 23
Key-operated switch for the front passenger airbag / warning
light for front seat passenger airbag deactivation
Positions of the key switch

Button for folding out/folding in the key bit
Battery status warning light - if the warning light does not flash when you
press a button on the key, the battery is discharged.
Unlocking / locking the boot lid
By pressing lightly on the button 4 the lid is unlocked.
By pressing down on the button 4 the lid is unlocked and unlatched (partly-
opened).
If the lid is unlocked or released with the button 4, then the lid is automatical-
ly locked after closing. The period of time after which the flap is locked can be
set

WARNINGAlways adjust the headlight beam to meet the following conditions - other-
wise risk of accident.
v
The vehicle does not dazzle other road users, especially oncoming vehi-
cles.

v
The beam range is sufficient for safe driving.
Note

v If, with a dipped beam, the ignition is turned off, then the dipped beam will
automatically switch off and the parking lights will come on. Does not apply to
the position , as long as the conditions are met for the COMING HOME
function . The parking lights are switched off when the ignition key is removed
(for vehicles with the KESSY system, after opening the driver

More keypad languages settings

vWLAN - List of available hotspots of external devices

vWLAN
- Switch Infotainment WLAN on/off

v
WPS quick connection (WPS button)
- Establish a secure connection to the hot-
spot of the external device using WPS (applies to Infotainment Amundsen)

v
Manual settings
- Parameter settings for searching and connecting to the hot-
spot of the external device
v
Network name
- Enter the Hotspot name

v
Network key
- Access passkey setting

v
Security level:
Security setting (WPA2 always set)

v
Connect
- Establish a connection

v
Find
- Search / Restore the list of available hotspots

v
Mobile hotspot
- Infotainment hotspot setting (the symbol

displayed with
the number of connected external devices)

v
Mobile hotspot
- Switch the Infotainment hotspot on/off

v
WPS quick connection (WPS button)
- Establish a secure connection to the Info-
tainment hotspot via WPS (applies to Amundsen)

v
Hotspot (WLAN) settings
- Parameter settings for connection to the Infotain-
ment hotspot
v
Security level:
Security setting (WPA2 always set)

v
Network key
- Input of the access password

v
SSID: ...
- Name of the infotainment Hotspots

v
Do not send network name (SSID)
-Turn Infotainment hotspot visibility on/off

v
Store
- Storage of the parameters set for the Infotainment hotspot
Network settings
Applies to infotainment Amundsen with the connected Carstick device.

Switching the ignition on/offFig. 186
Positions of the vehicle key in the ignition lock / starter button

Note
vThe engine running noises may be louder at first for a short time after start-
ing the cold engine.
v
You should not switch on any major electrical components during the heating
period, otherwise the vehicle battery will be drained unnecessarily.

v
After switching off the ignition, the radiator fan may (also intermittently)
continue to operate for approx. 10 minutes.
Problems with starting the engine - Vehicles with starter button
Fig. 187
Starting the engine - Press the
button with the key

Storing the tyre pressure values by means of the buttonFig. 216
Key for storing the pressure val-
ues