Page 34 of 340
Fastening systems
attachment points of the system
Fig. 28
Labels of the system
is a system for securing child seats quickly and safely.
Two locking eyes are located between the seat backrest and the seat cushion
of the outer rear seats and front passenger seat for fixing the system child
seat in place.
First, remove the caps A in order to access the locking eyes
Page 101 of 340
Page 107 of 340
Multifunction pocketFig. 130
Securing the multifunction
pocket
Page 114 of 340
Folding out takes place in reverse order.
The variable loading floor is divided in the same way in the upper and lower po-
sition.
Net partition
Using the net partition
Fig. 147
Open part of the roll-up luggage compartment cover / release
lever
Fig. 148
Correctly secure net partition behind the front seats in the
pulled-out state
The net partition can either be pulled out and secured from behind the rear seats or behind the front seats.
Pull out and secure the net partition behind the rear seats
Page 116 of 340
WARNINGFor road safety when transporting cargo on the roof rack, observe the fol-
lowing instructions.v
Always distribute the load on the roof rack evenly and secure properly us-
ing suitable lashing straps or tensioning straps.
v
When transporting heavy objects or objects which take up a large area on
the roof rack system, the handling of the car may change as a result of the
displacement of the centre of gravity. The style of driving and speed must
therefore be adapted to the current circumstances.
v
The permissible roof load, permissible axle loads and permissible total ve-
hicle weight must not be exceeded under any circumstances
Page 255 of 340
WARNINGAfter fitting the tow bar, always secure the lock and remove the key. The
tow bar must not be operated with the key inserted.
Check proper fitting
Fig. 303
Correctly secured ball rod
Page 286 of 340
Vehicle tool kitFig. 327
Vehicle tool kit
The box with the tool kit is located in the storage compartment for the spare
wheel and may be secured with tape, depending on specification.
Depending on the vehicle configuration, it may not contain all the compo-
nents listed in the on-board tool kit.
Screwdriver
Key for removing and installing the tail light
Adapter for anti-theft wheel bolts
Towing eye
Clamps for removing the wheel trims
Jack with sign
Crank for the jack
Wheel wrench
Extraction pliers for the wheel bolt caps
Breakdown kit
12345678910WARNINGv The factory-supplied lifting jack is only intended for your model of vehi-
cle. Under no circumstances attempt to lift other vehicles or loads with this
