2019 Seat Tarraco display

Start and driving
v
It lights up yellow
Limited steering operation.
Drive carefully to a specialised workshop to hav e the
st
eering checked.
If the warning light does not come on again after re-
starting the engine and driving a short distance, it is
not necessary to check the steering.
OR: The 12-volt battery was disconnected and re-
connect ed.
Driv

e a short distance at 15-20 km / h (9-12 mph). v
It flashes yellow
The steering column is jammed.
When stopped, turn the steering wheel in both direc-
tions.
OR: The st eering column does not unl

ock or lock.
Remove the key fr om the ignition s

witch and recon-
nect it. Consider the messages shown on the instru-
ment panel display.
Do not continue driving if the steering column re-
mains locked after switching on the ignition. Seek
specialist assistance. The control lamp should light up for a few
seconds when the ignition is s
wit
ched on. It
shoul d go out once the engine is st
arted. WARNING
Never ignore the warning lamps or messag-
es.

Driver assistance systems
Introduction Fig. 253
On the instrument panel display: indi-
cations of the speed limit ed stat
us. The speed limiter helps avoid exceeding a
pr
ogr
ammed speed, fr om 30 km/h (
19 mph)
appr o
x. and f
aster.

Driving
Operation of the emergency brake
assist ance syst
em (Front Assist) Fig. 259
On the instrument panel display:
Fr ont Assist deactiv at
ed indication. The Front Assist is active whenever the igni-
tion is s
wit
ched on.
When the Fr ont Assist is s
witched off
, so t
oo
are the advance warning and the distance
warning functions.
SEAT recommends leaving the Front Assist
activated. Exceptions

Driver assistance systems
System limitations Fig. 260
On the instrument panel display: ini-
tial syst em self-calibr
ation indication. Front Assist has certain limitations inherent to
the syst
em. Thus, in cert
ain circumst
ances,
some of the r eactions may be inappr
opriat
e
from the driver

Driver assistance systems
Fig. 272
On the instrument panel display: Indi-
cation on the L ane Assist syst
em display (e
x-
ampl e 2). Status display
Fig. 27 1

: The syst
em is activ e
, but not
av
ailable, either because the minimum
speed has not been reached or because
the lane lines are not recognised.
Fig. 271 : The system is active and available, both lane lines are recognised.
The steering angle is not being correc-
ted at this moment.

Braking and parking
Using the blind spot detector (BSD)
with parking assist ant (RC
TA) Activating and deactivating the blind spot
detector (BSD) with parking assistant
(RCTA)
The blind spot det ect
or with parking assistant
can be switched on and off by accessing the
Assistance systems menu on the dash
panel display using the steering wheel con-
trols. If the vehicle is equipped with a multi-
function camera, it can also be accessed by
means of the driver assistance systems key
located on the main beam headlight lever.
Open the Assistants menu.

Help with parking and manoeuvring
When the Park Assist system turns the steer-
ing wheel with the v ehicl
e stationary, the in-
strument panel al so displays the symbol

.
Keep the brake pedal depressed while the
symbol remains on the dash panel display to
turn the wheels with the vehicle stopped. This
way, the system will require fewer manoeu-
vres to complete the parking action.
Trailer mode
The Park Assist system cannot be switched
on if the factory-fitted towing bracket

Help with parking and manoeuvring
Parking with the parking assist system Fig. 284
On the instrument panel display: paral-
lel parking.  Finding a parking space.  Park
-
ing position.  Manoeuvring. Fig. 285
On the instrument panel display: angle
parking.  Finding a parking space.  Parking
position.  Manoeuvring. Message to move forwards
Y
our v
ehicle
P ark ed v
ehicl

e
Parking space detected
Message to park
Message to press the brake pedal
Progress bar
1 2
3
4
5
6
7 The necessary conditions have to be met to
park with P
ark Assist