2019 Seat Ateca wheel

Driver assistance systems
pressing the clutch, accelerator or moving
the wheel.

Driver assistance systems
Using the blind spot detector (BSD)
with parking assist ant (RC
T
A)Activating and deactivating the blind spot
detect
or (BSD) with parking assist

ant
(RCTA)
The blind spot detector with parking assistant
can be switched on and off by accessing the
Assistance systems menu on the dash
panel display using the steering wheel con-
trols. If the vehicle is equipped with a multi-
function camera, it can also be accessed by
means of the driver assistance systems key
located on the main beam headlight lever.
Open the Assistants menu.

Wheels
can otherwise escape and possibly cause
damage.

Practical tips
If the rims and tyres have received a heavy
impact or hav e been damaged, hav
e them
check
ed and, if required, replaced at a speci-
alised workshop.
Low profile tyres may deteriorate more quick-
ly than standard tyres.
Concealed damage
Damage to tyres and rims is often not readily
visible. If you notice unusual vibration or the
car pulling to one side, this may indicate
that one of the tyres is damaged. Reduce
speed immediately if there is any reason to
suspect that damage may have occurred. In-
spect the tyres for damage. If no external
damage is visible, drive slowly and carefully
to the nearest specialised workshop and
have the car inspected.
Tyres with directional tread pattern
An arrow on the tyre sidewall indicates the di-
rection of rotation on single drive tyres. Al-
ways note the direction of rotation indicated
when mounting the wheel. This guarantees
optimum grip and helps to avoid aquaplan-
ing, excessive noise and wear.
Retrofitting accessories
If you wish to change or fit wheels, rims or
wheel trims, we recommend that you consult
with a SEAT Official Service centre for advice
regarding current techniques. Service life of tyres
Fig. 306
Location of the tyre pressure sticker. Correct inflation pressures and sensible driv-
ing habits will incr
ease the useful lif
e of your
t

yres.

Wheels
Do not forget the spare wheel when checking
the t yr
e pr
essures: Keep this spare wheel in-
flated to the highest pressure required for the
road wheels.
In the case of a minimised temporary spare
wheel (125/70 R18) inflate to a pressure of 4.2
bar as indicated on the tyre pressure label

Practical tips
Interchanging tyres Fig. 308
Interchanging tyres. To ensure that the wear is equal on all tyres
the wheel
s shoul
d be changed r
ound from
time to time according to the system

Wheels
and vehicle safety could be severely im-
pair ed

Wheels