2019 Seat Arona ECU

The essentials
Securing child seats Fig. 32
On rear seats: possible assemblies of chil-
dren seats. Figure

The essentials
Securing child seats with the ISOFIX/iSize and Top Tether system* Fig. 33
ISOFIX/iSize securing rings. Fig. 34
Position of the Top Tether rings on the
back of the rear seat. Child seats can be secured quickly, easily
and saf
ely on the r
ear outer seats with the
“ISOFIX” and T op T
ether* system.
Two “ISOFIX” retaining rings are fitted on each
rear side seat. In some vehicles, the rings are
secured to the seat frame and, in others, they
are secured to the rear floor. The “ISOFIX” rings are located between the rear side seat
backrest and the seat cushioning

The essentials
Securing child seats with the “ISOFIX/i-Size” Fig. 35
ISOFIX/iSize securing rings. Fig. 36
Rear seat: cut-out grooves. You are obliged to follow the seat manufac-
t
ur
er

The essentials
Securing child seats with the Top
T ether* r
etaining str
apsFig. 37
Retainer strap: adjustment and assem-
bly accor ding to the T
op Tether belt. Fig. 38
Rear part of the rear seats: securing
rings for the Top Tether str ap
. Child seats with the Top Tether system come
with a str
ap f
or securing the seat t o the v
ehi-
cl

e anchor point, located at the back of the
rear seat backrest and provide greater re-
straint.
The objective of this strap is to reduce for-
ward movements of the child seat in a crash,
to reduce the risk of injuries to the head from
hitting the inside of the vehicle.
Using the Top Tether in rear-facing moun-
ted seats
Currently, there are very few rear-facing child
safety seats that have Top Tether. Please
carefully read and follow the seat manufac-
turer instructions to learn the proper way to
install the Top Tether strap. Securing the retainer strap

Fuses and bulbs
holder. The securing tabs must click into
pl ace
. CAUTION
Take care when removing the rear light unit
to make sure ther e is no damage t
o the
paintwork or any of its components. Note

Operation
Note
For anti-theft security, only the driver door
is fitted with a lock cylinder. “Safe” security system*
1)This is an anti-theft device which consists of a
double lock for the door l
ocks and a deacti-
v
ation function for the boot in order to prevent
forced entry.
Activation
The “safe” system is activated when the vehi-
cle is locked using the key or the remote con-
trol.
To activate it with the key, rotate once it is in-
serted in the door lock cylinder in the locking
direction.
To activate the system using the remote con-
trol, press the lock button once  on the re-
mote.
Once this system is activated, opening doors
from the outside and the inside is not possi-
ble. The rear lid can not be opened. The cen-
tral lock button does not work. When the ignition is switched off, the instru-
ment panel display indicates that the “Safe”
syst em is on.
Deactiv

ation
Rotate the key inserted in the lock cylinder
twice towards the locking direction.
To activate the system using the remote con-
trol, press the lock button  on the remote
twice in less than 5 seconds.
On deactivating the “Safe” system, the alarm
volumetric sensor is also deactivated.
With the “Safe” switched off, doors can be
opened from the interior but not from the ex-
terior.
See “Selective unlocking system*”
“Safe” status
On the driver door, there is warning lamp visi-
ble from outside the vehicle through the win-
dow which shows the “Safe” system status.
We will know that “Safe” system is activated
by the flashing warning lamp. The indicator
will flash on all vehicles, fitted and nor fitted
with an alarm, until they unlock.
Remember: Safe enabled with or without alarm: con-
tinuous flashing of warning lamp.
Saf
e disabled without alarm: the warning
lamp stays off.
Safe disabled with alarm: the warning lamp
stays off. WARNING
No one should remain inside the vehicle if
the “Safe” system is activat ed because
opening the doors will not be possibl

e in
the event of an emergency neither from the
inside nor the outside and help from the
outside is made difficult. Danger of death.
Passengers could become trapped inside
in case of emergency. Selective unlocking system*
This system allows to unlock either just the
driv
er door or all the v
ehicle
.
Driv

er door unlock button
Unlock once. Use either the key or the remote
control.
Once the key is inserted in the lock cylinder,
rotate once in the unlock direction. The driver
door will remain without “Safe” and unlocked. 1)
Available depending on market and version.
128

Operation
signal light located on the driver door will
fl ash al
ong with the t urn signal
s, indicating
that the al
arm and the locking security sys-
tem (double lock) have been turned on.
If any of the doors or the bonnet are open,
they will not be included in the protection
zones of the vehicle when the alarm is con-
nected. If the door or the bonnet are subse-
quently closed, they will be automatically in-
cluded in the protection areas of the vehicle
and the turn signals will flash accordingly
when the doors close.

Operation
reasons, special fixtures must be used to
saf ely tr
ansport luggage , bicycl
es, skis, surf
boar
ds or boats on the roof. Suitable acces-
sories can be acquired at SEAT dealerships.
Always secure the crossbars and the roof
carrier system properly. Always take the as-
sembly instructions that come with the cross-
bars and the roof carrier system in question
into account.
The crossbars are assembled on the roof rail-
ings. The distance between cross bars