2019 Seat Arona display

Operation
Inspection of compressed natural gas
t anks (CNG) r
eminder
When l ess than 90 days f
or the r
eview of the
compressed natural gas tanks (CNG), when
the ignition is switched on, the instrument
panel display will a reminder for review of
the gas tanks and an audible warning will be
emitted.
As approaches the service date of inspection
of the gas tanks, the message and the audi-
ble warning will stop modify accordingly.
Check a service warning
With the ignition switched on, the engine off
and the vehicle at a standstill, the current
service notification can be read:
Check the date of the current service on the
infotainment system

Operation
Note
For anti-theft security, only the driver door
is fitted with a lock cylinder. “Safe” security system*
1)This is an anti-theft device which consists of a
double lock for the door l
ocks and a deacti-
v
ation function for the boot in order to prevent
forced entry.
Activation
The “safe” system is activated when the vehi-
cle is locked using the key or the remote con-
trol.
To activate it with the key, rotate once it is in-
serted in the door lock cylinder in the locking
direction.
To activate the system using the remote con-
trol, press the lock button once  on the re-
mote.
Once this system is activated, opening doors
from the outside and the inside is not possi-
ble. The rear lid can not be opened. The cen-
tral lock button does not work. When the ignition is switched off, the instru-
ment panel display indicates that the “Safe”
syst em is on.
Deactiv

ation
Rotate the key inserted in the lock cylinder
twice towards the locking direction.
To activate the system using the remote con-
trol, press the lock button  on the remote
twice in less than 5 seconds.
On deactivating the “Safe” system, the alarm
volumetric sensor is also deactivated.
With the “Safe” switched off, doors can be
opened from the interior but not from the ex-
terior.
See “Selective unlocking system*”
“Safe” status
On the driver door, there is warning lamp visi-
ble from outside the vehicle through the win-
dow which shows the “Safe” system status.
We will know that “Safe” system is activated
by the flashing warning lamp. The indicator
will flash on all vehicles, fitted and nor fitted
with an alarm, until they unlock.
Remember: Safe enabled with or without alarm: con-
tinuous flashing of warning lamp.
Saf
e disabled without alarm: the warning
lamp stays off.
Safe disabled with alarm: the warning lamp
stays off. WARNING
No one should remain inside the vehicle if
the “Safe” system is activat ed because
opening the doors will not be possibl

e in
the event of an emergency neither from the
inside nor the outside and help from the
outside is made difficult. Danger of death.
Passengers could become trapped inside
in case of emergency. Selective unlocking system*
This system allows to unlock either just the
driv
er door or all the v
ehicle
.
Driv

er door unlock button
Unlock once. Use either the key or the remote
control.
Once the key is inserted in the lock cylinder,
rotate once in the unlock direction. The driver
door will remain without “Safe” and unlocked. 1)
Available depending on market and version.
128

Operating modes
Display: Meaning
AF off The tracking of alternative frequencies is
disabl
ed. Note

Infotainment System
Function button: function
 /
 To change to the PREVIOUS
or
NEXT image.
The same function can be per-
formed by sliding your finger hori-
zontally acr oss the scr
een.
SETTINGS Open the Image settings menu.Enlarging or reducing the view
To enlarge or r
educe the vie

w of the image
displayed:

Operating modes
Stop
To stop route guidance to the active
destination.b)
c To move a stopover or a destination to
another position on the list. Press and
drag to mo v
e the destination.a)
This function button is only displayed with route
guidance activated and when a destination has been added to the t our

.
b) This function button is only displayed with route
guidance activated.
Last destinations
View of destinations f

or which a route has al-
ready been started.
My destinations

Operating modes
Function button: function
Position : current vehicle position in coordinates and
GPS status (satellit e r
eception).a)
This function button is only shown when route guid-
ance is not active or when predictive r out

e guidance
is active.
Press the  function button to close the split
screen.
At any moment during navigation, pressing inside the map will make a pop-up menu ap-
pear with the f oll

owing functions: Function button: function
Street name or coordinates : shows the details of the
point selected on the map.
Only when you pr ess on an icon on the map:
POI : name of the point of interest (when only one
appears on the map).
Group of POIs : more points of interest (when you
press on the map on various POIs grouped t o-
gether).
F

avourite : name of the favourite.
Home : Home address.
Start route guidance : starts guidance directly.
Add stopover destination : only when you have an ac-
tive route .
Sear

ch nearby : enters in the search menu, but only
for the area around the point sel ect

ed on the map. Function button: function
Demo mode start (only when demo mode is active)
Map display
Fig. 204
Messages and function buttons on
the map displ ay. Function buttons and messages on the
map displ
ay.
T o activ at
e function butt

ons

Start and driving
panel display. This may happen when, for ex-
ampl e
, the batt ery of the v
ehicl
e key button is
very low or flat:

Driving
Emergency program A backup programme is in place if a fault
should occur in the control system.
If all the positions of the sel
ect
or lever are
shown over a light background on the instru-
ment panel display, there is a system fault
and the automatic gearbox will operate in
with the backup programme. When the back-
up programme is activated, it is possible to
drive the vehicle, however, at low speeds and
within a selected range of gears. In some ca-
ses driving in reverse gear may not be pos-
sible. CAUTION
If the gearbox operates with the backup
programme, t ak

e the vehicle to a special-
ised workshop and have the fault repaired
without delay. Indications on the instrument panel
displ
ay Clutch