2019 Seat Alhambra lights

Operation

It lights up
Main beam on or flasher on

Lights and visibility
lights also work when the ignition is switch-
ed off

Lights and visibility
headlight adjustment (automatic lights al-
so), for e
x
ample, if additional headlight are
fitted. Note
Main beam and flashed headlights can be
t urned on and off manually at any time with
the t urn signal and main beam l

ever

Operation
When being towed with the hazard warning
lights on, a change in dir ection or tr
affic l
ane
can be indicated as usual using the turn sig-
nal lever. The hazard lights will be interrupted
temporarily.
If your vehicle breaks down:
Park the vehicle a safe distance from
traffic and on suitable ground

Lights and visibility
Note
Use of the Tourist light option and the
adhesives on the headlights is only all o
wed
if they are to be used for a short period of
time. To modify the direction of the head-
lights permanently, please take the vehicle
to a specialised workshop. SEAT recom-
mends visiting a technical service centre. Headlight range control, lighting of
the instrument panel and control
sFig. 145
On the side of the steering wheel: in-
strument and s wit
ch lighting contr

ol 1 and
headlight r ange contr ol 2 1
Instrument and switch lighting
When the headlights ar e s
wit

ched on, the
brightness of the instruments and switch
lighting can be regulated by turning the
switch

Operation
Note
The reading lights go out when the vehicle
is lock ed, or a f
ew minutes after the key is
removed from the ignition. This prevents
the vehicle

Lights and visibility
Windscreen wiper and win-
do w wiper syst
ems
Contr
ol lamp 
It lights up
Windscreen wiper level too low.
Top up the windscreen wiper r
eservoir as soon as
possible

Operation
Headlight wash/wipe system
The headlight w ashers/wipers cl
ean the
headlight l
enses.
After the ignition is switched on, the first and
every fifth time the windscreen washer is
switched on, the headlights are also washed.
Therefore, the windscreen wiper lever should
be pulled towards the steering wheel when
the dipped beam or main beam are on. Any
encrusted dirt (such as insects) should be
cleaned regularly (e.g. when refuelling).
To ensure the headlight washers work cor-
rectly in winter, any snow which has got into
the bumper jet supports should be cleaned
away. If necessary, remove snow with an an-
ti-icing spray. Note
The wiper will try to wipe away any obsta-
cles that ar e on the windscr

een. The wiper
will stop moving if the obstacle blocks its
path. Remove the obstacle and switch the
wiper back on again. Rain sensor*
Fig. 148
Windscreen wipers lever: adjust the
r ain sensor A .
Fig. 149
Rain sensor sensitive surface The rain sensor controls the frequency of the
windscr
een wiper int erv

als, depending on the
amount of rain