2019 NISSAN VERSA SEDAN lights

[x] Cancel search: lights

Page 128 of 372

NISSAN VERSA SEDAN 2019  Owner´s Manual ∙ When thebutton is pressed
with all doors locked, the hazard
warning lights flash twice and the
horn beeps once as a reminder that
the doors are already locked.
∙ If a door is open and you press

Page 129 of 372

NISSAN VERSA SEDAN 2019  Owner´s Manual Releasing the trunk lid
Press thebutton on the key fob for
longer than 0.5 seconds to open the trunk
lid. The trunk release button on the key fob
will not operate when the ignition switch is
placed in

Page 130 of 372

NISSAN VERSA SEDAN 2019  Owner´s Manual Silencing the horn beep feature
If desired, the horn beep feature can be
deactivated using the key fob.
To deactivate:Press and hold the
andbuttonsfor at least 2 seconds.
The hazard warning lights wil

Page 134 of 372

NISSAN VERSA SEDAN 2019  Owner´s Manual Locking doors
1. Move the shif t lever to the P (Park) posi-tion, place the ignition switch in the
LOCK position and make sure you carry
the Intelligent Key with you.
2. Close all doors.
3. Push any d

Page 135 of 372

NISSAN VERSA SEDAN 2019  Owner´s Manual Lockout protection
To prevent the Intelligent Key from being
accidentally locked in the vehicle, lockout
protection is equipped with the Intelligent
Key.
When the driver’s side door is open, the
doo

Page 137 of 372

NISSAN VERSA SEDAN 2019  Owner´s Manual Lockout protection
To prevent the Intelligent Key from being
accidentally locked in the trunk, lockout
protection is equipped with the Intelligent
Key.
When all doors are locked and the trunk lid
is c

Page 138 of 372

NISSAN VERSA SEDAN 2019  Owner´s Manual CAUTION
Af ter locking the doors using the Intel-
ligent Key, be sure that the doors have
been securely locked by operating the
door handles.
Unlocking doors
1. Press thebutton on the Intelligent
Key.

Page 139 of 372

NISSAN VERSA SEDAN 2019  Owner´s Manual Releasing the trunk lid
Press thebutton for longer than
0.5 seconds to open the trunk lid. The trunk
release button will not operate when the
ignition switch is placed in the ON position.
Using the pa