2019 NISSAN VERSA SEDAN check engine

[x] Cancel search: check engine

Page 259 of 372

NISSAN VERSA SEDAN 2019  Owner´s Manual ∙ If the low tire pressure warning lightilluminates while driving, avoid sud-
den steering maneuvers or abrupt
braking, reduce vehicle speed, pull off
the road to a safe location and stop
the vehicl

Page 267 of 372

NISSAN VERSA SEDAN 2019  Owner´s Manual CAUTION
∙ Do not push start this vehicle. Thethree-way catalyst may be damaged.
∙ Continuously Variable Transmission (CVT) and manual transmission mod-
els cannot be push-started or tow-
started.

Page 268 of 372

NISSAN VERSA SEDAN 2019  Owner´s Manual WARNING
Be careful not to allow your hands, hair,
jewelry or clothing to come into contact
with, or get caught in, engine belts or
the engine cooling fan. The engine cool-
ing fan can start at any tim

Page 281 of 372

NISSAN VERSA SEDAN 2019  Owner´s Manual 8 Do-it-yourself
Maintenance precautions.......................8-2
Engine compartment check locations ...........8-3
Engine cooling system ..........................8-4
Checking engine coolant level .

Page 283 of 372

NISSAN VERSA SEDAN 2019  Owner´s Manual HR16DE engine
1. Drive belt location
2. Engine oil filler cap
3. Air cleaner
4. Brake and clutch (if so equipped)fluid reservoir
5. Fusible link
6. Battery
7. Engine coolant reservoir
8. Radiator cap

Page 285 of 372

NISSAN VERSA SEDAN 2019  Owner´s Manual CHECKING ENGINE COOLANT
LEVEL
Check the coolant levelin the reservoir
when the engine is cold. If the coolant
level is below the MIN level
B, add coolant
to the MAX level
A. If the reservoir is empt

Page 286 of 372

NISSAN VERSA SEDAN 2019  Owner´s Manual CHECKING ENGINE OIL LEVEL
1. Park the vehicle on a level surface andapply the parking brake.
2. Start the engine and let it idle until it reaches operating temperature.
3. Turn off the engine. Wait mo

Page 287 of 372

NISSAN VERSA SEDAN 2019  Owner´s Manual CHANGING ENGINE OIL
1. Park the vehicle on a level surface andapply the parking brake. 2. Start the engine and let it idle until it
reaches operating temperature, then
turn it off.
3. Remove the oil f