2019 NISSAN VERSA SEDAN brake light

[x] Cancel search: brake light

Page 281 of 372

NISSAN VERSA SEDAN 2019  Owner´s Manual 8 Do-it-yourself
Maintenance precautions.......................8-2
Engine compartment check locations ...........8-3
Engine cooling system ..........................8-4
Checking engine coolant level .

Page 288 of 372

NISSAN VERSA SEDAN 2019  Owner´s Manual 8. Start the engine. Check for leakagearound the drain plug
Band oil filter.
Correct as required.
9. Turn the engine off and wait more than 10 minutes. Check the oil level with the
dipstick. Add engi

Page 290 of 372

NISSAN VERSA SEDAN 2019  Owner´s Manual BRAKE FLUID
Check the brake fluid level in the reservoir. If
the fluid level is below the MIN line
B, or the
brake warning light comes on, add Genu-
ine NISSAN Brake Fluid or equivalent DOT 3
fluid u

Page 298 of 372

NISSAN VERSA SEDAN 2019  Owner´s Manual If the brakes do not operate properly, have
the brakes checked. It is recommended
that you visit a NISSAN dealer for this ser-
vice.
Self-adjusting brakes
Your vehicle is equipped with self-adjusting

Page 320 of 372

NISSAN VERSA SEDAN 2019  Owner´s Manual ∙ The original tires have built-intread wear indicators. When the
wear indicators are visible, the
tire(s) should be replaced.
∙ Tires degrade with age and use. Have tires, including the spare,
ov

Page 325 of 372

NISSAN VERSA SEDAN 2019  Owner´s Manual secondary latch keeps the hood from
opening when the primary latch is re-
leased.
When driving in areas using road salt or
other corrosive materials, check lubrica-
tion frequently.
Lights*:Clean the

Page 326 of 372

NISSAN VERSA SEDAN 2019  Owner´s Manual Seats:Check seat position controls such
as seat adjusters, seatback recliner, etc., to
ensure they operate smoothly and all
latches lock securely in every position.
Check that the head restraints/head

Page 358 of 372

NISSAN VERSA SEDAN 2019  Owner´s Manual Due to legal requirements in some states
and Canadian Provinces, your vehicle may
be required to be in what is called the
“ready condition” for an
Inspection/Maintenance (I/M) test of the
emission
Page:   < prev 1-10 9-16 17-24 25-32 33-40 next >