2019 NISSAN ROGUE HYBRID display

[x] Cancel search: display

Page 229 of 508

NISSAN ROGUE HYBRID 2019  Owners Manual HOW TO READ THE DISPLAYED
LINES
Guiding lines which indicate the vehicle
width and distances to objects with refer-
ence to the vehicle body line
Aare dis-
played on the monitor.
Distance guide lines

Page 230 of 508

NISSAN ROGUE HYBRID 2019  Owners Manual Backing up on a steep uphill
When backing up the vehicle up a hill, the
distance guide lines and the vehicle width
guide lines are shown closer than the actual
distance. Note that any object on the hi

Page 231 of 508

NISSAN ROGUE HYBRID 2019  Owners Manual Backing up behind a projecting
object
The positionCis shown farther than the
position
Bin the display. However, the po-
sition
Cis actually at the same distance as
the position
A. The vehicle may

Page 232 of 508

NISSAN ROGUE HYBRID 2019  Owners Manual 1. Visually check that the parking space issafe before parking your vehicle.
2. The rear view of the vehicle is displayed on the screen
Awhen the shif t lever is
moved to the R (Reverse) position. 3.

Page 233 of 508

NISSAN ROGUE HYBRID 2019  Owners Manual ADJUSTING THE SCREEN
1. While on the main menu screen, touchthe “Settings” key.
2. Use the arrow to tab to the next screen and touch the “Camera” key.
3. Touch the “Display Settings” key.

Page 234 of 508

NISSAN ROGUE HYBRID 2019  Owners Manual ∙ Do not put anything on the rearviewcamera. The rearview camera is in-
stalled above the license plate.
∙ When washing the vehicle with high pressure water, be sure not to spray it
around the cam

Page 236 of 508

NISSAN ROGUE HYBRID 2019  Owners Manual WARNING
Failure to follow the warnings and in-
structions for the proper use of the In-
telligent Around View Monitor system
could result in serious injury or death
∙ The Intelligent Around View Mon

Page 237 of 508

NISSAN ROGUE HYBRID 2019  Owners Manual The screen displayed on the Intelligent
Around View Monitor will automatically re-
turn to the previous screen 3 minutes af ter
the CAMERA button has been pressed with
the shif t lever in a position o