2019 MITSUBISHI MIRAGE change time

1
Thank you for buying a Mitsubishi MIrage. There’s no doubt you’ve already realized how well
your car drives on the open road. What you may not know is all the great\
features that help
your car perform the way it does. In the pages ahead we’re going to run through the basics
and prepare you for the road.
We hope you will visit the Mitsubishi Owner’s site where we store the\
latest Mitsubishi news
and special offers. Here you can also keep track of your car’s warran\
ty and servicing needs,
get Roadside Assistance Information and tap into other owner-centric det\
ails. Just log on to
HTTPS://WWW.MITSUBISHICARS.COM/OWNERS.
Some of the information contained in this booklet may not be correct due\
to product changes which may
have occurred after the time it was published. Mitsubishi Motors North A\
merica, Inc. reserves the right to
make changes at any time, without notice, to prices, color, materials, specification and models.
TABLE OF CONTENTS
Outside Driver's Side .......... Page 4
Steering Wheel Controls ....... Page 5
Steering Column Controls ...... Page 7
Instrument Cluster ...........Page 8
Instrument Panel ............Page 9
Center Console & Panel ....... Page 10
Emergency Roadside
Assistance App ............. Page 14
FAQ’s ..................... Page 15

6STEERING WHEEL CONTROLS
A - CANCEL: Used to deactivate the set speed driving.
B - RES + : Used to increase the set speed and to return
to the original set speed.
C - SET – : Used to reduce the set speed and to set the
desired speed.
D - ON/OFF: Used to turn on and off the cruise control.
NOTE: Then operating the cruise control switches, press the
cruise control switches correctly. The set speed driving may
be deactivated automatically if two or more switches of
the cruise control are pressed at the same time. Minimum
speed to operate cruise control is about 25 mph.
CRUISE CONTROL (IF EQUIPPED)
B
C
D
A
AUDIO REMOTE CONTROL SWITCH
VOLUME UP
VOLUME DOWNSEEK
Change station
or track
MODE
Change the audio source

8INSTRUMENT CLUSTER
1. TEMPERATURE INDICATOR LAMP ILLUMINATED GREEN
When the temperature indicator lamp is illuminated
Green this indicates the engine has not reached normal
operating temperature.
NOTE: This will result in cooler heater outlet temperatures
until engine reaches normal operating temperatures.
2. TEMPERATURE INDICATOR LAMP OFF
When the temperature indicator lamp is Off this indicates
the engine is at normal operating temperature.
3. TEMPERATURE INDICATOR LAMP ILLUMINATED RED
When the temperature indicator is illuminated Red this
indicates the engine is overheating
NOTE: If the engine is overheating, find a safe place
to park the vehicle, then shut the engine off and call
Roadside Assistance as continued driving could cause the
engine to fail.
TEMPERATURE INDICATOR LAMP OPERATION
MULTI-INFORMATION DISPLAY SWITCH
Each time the multi-information
display switch is operated, the
buzzer sounds and the
multi-information display
changes between information
such as warnings, trip
odometer, average and
momentary fuel consumption,
distance range, etc.
TIRE PRESSURE MONITORING SYSTEM (TPMS)
The Tire Pressure Monitoring System
light illuminates when one or more of
your tires is significantly under inflated.
Please note that changes in the outside
temperature may decrease tire pressure
causing the TPMS light to turn on. If the
TPMS light remains illuminated, check
your tire pressure. If the warning light
illuminates, take the necessary measures
referring to the owner’s manual.
ECO INDICATOR
This indicator will be
displayed when fuel efficient
driving is achieved.
You can deactivate the system by pressing down
the “ASC OFF” switch for 3 seconds or longer. When
the ASC is deactivated, the display/indicator will
turn on.
To reactivate the ASC, momentarily press the “ASC
OFF” switch; the display/indicator is turned off.
ACTIVE STABILITY CONTROL (ASC) OFF SWITCH

9INSTRUMENT PANEL
START/STOP ENGINE SWITCH (IF EQUIPPED WITH F.A.S.T.-KEY)
While carrying the F.A.S.T.-KEY within the
operating range, the Start/Stop Engine
Switch can be used to start the engine. • Move the selector lever in “P” position
and hold the brake pedal down. Push
the Start/Stop Engine Switch.
• To stop the engine, stop the vehicle
completely and move the selector
lever to “P” then press the Start/Stop
Engine Switch.
*If you have to bring the engine to an emergency stop while
driving, press and hold the Start/Stop Engine Switch for 3
seconds or more, or press it quickly 3 times or more.
• If you press the Start/Stop Engine Switch without depressing
the brake pedal, you can change the operation mode in the
order of OFF, ACC, ON, OFF.
* If the engine cannot be started by depressing the brake
pedal, depress the brake pedal more firmly than usual with
the right foot. Then, press the Stop/Start Engine Switch.
• If the engine cannot be started or the operation mode cannot
be changed, check the position of the F.A.S.T.-KEY or the
battery performance of the F.A.S.T.-KEY.
HEATED SEAT SWITCH (IF EQUIPPED)
POSITION ACTION
HI For quick heating
NEUTRAL Heater off
LO Keeps seat warm

11CENTER CONSOLE & PANEL
LISTENING TO THE RADIO
A - Power and Volume knob
B - Ejects disc
C - Seek stations or
tracks up or down
D - Tunes stations up or down
E - Returns to the initial display
F - Selects AM/FM
TO ADJUST THE CLOCK
1. Press the HOME key
2. Touch SETTING, then CLOCK
• The display changes to the clock setting where time
and format can be adjusted.
3. Touch SET
4. To return to the settings, touch BACK
5. The time setting change is completed
E
C
B
F
AD
When the vehicle is placed in Reverse, the rearview camera
system automatically activates. A wide-angle view behind
the vehicle is shown.
REARVIEW CAMERA

12CENTER CONSOLE & PANEL
USB INPUT
1. Park your vehicle in a safe place and turn the ignition switch
to the “OFF” position or put the Operation Mode in OFF.
2. Plug in the USB connecting cable that is supplied with your
device and connect the USB end into the USB port located in
the lower instrument panel.
3.
Turn the ignition switch or the Operation Mode to the “ACC”
position. Turn on the audio system.
4. Press MEDIA to switch to the USB mode.
5.
Depending on your USB device, it may take longer for
playback to start.
6. Once the device is selected, playback starts.
A - Power and Volume Knob
B - Touch Screen Display
C - Home (return to initial display)
D - Seek & Track
E - Selects AM/FM
F - Selects Media Source
G - Phone
H - Tune station and
adjust sound
DISPLAY AUDIO SYSTEM (DAS) (IF EQUIPPED)
B
C
D
E
F
G
H
Make sure you are on the Home Screen and touch either FM or
the AM button.
1.
Once the station you want to save is shown on the screen,
touch and hold the preset boxes on the touch screen until
you hear a beep.
2.
Once you hear a beep, the station will be saved to memory.
The clock adjustment procedure is as follows:
1. Press the HOME key
2. Touch SETTING, then CLOCK

The display changes to the clock setting where time and
format can be adjusted.
3. Touch SET
4. To return to the settings, touch BACK
5. The time setting change is completed
ACCESSING AM OR FM STATIONS
TO SET A STATION IN MEMORY
SETTING THE CLOCK
A
This HD Radio receiver enables:
PSD Program Service Data: Contributes to the superior user
experience of HD Radio Technology. Presents song
name, artist, station IDs, HD2/HD3 Channel Guide, and
other relevant data streams.
HD2/HD3 Adjacent to traditional main stations are extra local
FM channels. These HD2/HD3 Channels provide new,
original music as well as deep cuts into traditional
genre.
DIGITAL SOUND Digital, CD-quality sound. HD Radio Technology enables
local radio stations to broadcast a clean digital signal.
AM sounds like today’s FM and FM sounds like a CD.

14EMERGENCY ROADSIDE ASSISTANCE APP
When you use this app, you will be linked directly to Mitsubishi’s friendly roadside assistance
team, who can quickly confirm your situation and dispatch the necessary service provider to
your exact location using advanced GPS enabled technology. We will keep you informed of the
details and an estimated time of arrival for the dispatched service provider, along with regular
updates of the provider’s progress to your location.
IT’S SIMPLE: 1. Access the app store from an iPhone or Android device and search for the app name:
Mitsubishi Road Assist+.
Requires iOS 8.0 or later or Android 4.4 and up.
2. Click on the app install button and read/agree to terms
and conditions.
3. Add your profile information to the app.
PLUS, WITH THE MITSUBISHI ROAD ASSIST+ APP: • Access exclusive insurance quotes to help you find a better rate on your auto insurance from participating carriers through the app.
• Access discounts and earn a Mitsubishi reward for safe driving. With the Mitsubishi Road Assist+ app you are given journey
feedback and a score based on your driving habits using your smartphone sensors. With Mitsubishi rewards, complete levels and
earn badges by achieving each level requirement in:
• Mileage – Drive a number of miles and days
• Hard Braking – Drive a number of trips with no more than a certain number of hard braking events
• Speeding – Drive at a number of trips with no more than a certain number of speeding events
DOWNLOAD THE MITSUBISHI ROAD ASSIST+ APP TODAY FOR EASY ACCESS TO DISCOUNTS AND MORE!
* Effective with 2005 models, timed from the date first sold or put into use, whichever is earlier. Coverage excludes winching of vehicles off road, vehicles disabled in rally
racing or other competitive events and vehicles used for commercial purposes, such as police, taxi, route delivery, livery or daily rental services. This excludes the i-MiEV.
Please see your warranty manual for details. MMNA reserves the right to limit and/or change available services.
MITSUBISHI ROAD ASSIST+ APP