5STEERING WHEEL CONTROLS
To Register a Bluetooth® Device:
1. Press the HOME key
2. Touch SETTING, then BLUETOOTH
3. Touch the NEW DEVICES
(IF NO BLUETOOTH
® DEVICES ARE REGISTERED, STEP 3 IS
NOT REQUIRED)
• If the Bluetooth
® device is permitted to pair then it will allow
the connection to be made.
• Supports Ver. 2.1 + EDR
• Supported profiles: Bluetooth
® Audio A2DP(V1.1),
AVRCP(V1.3); Hands-free HFP(v1.5); Phonebook transfer
PBAP(v1.0)
When Bluetooth
® is connected, 3 icons will display – the
antenna level (1 to 6), battery, Bluetooth® connected (shown
on the HOME screen).
BLUETOOTH® INFORMATION
BLUETOOTH® CONTROLS
For a list of compatible Bluetooth® devices, please go to
http://www.mitsubishicars.com/owners
A - SPEECH BUTTON
(IF EQUIPPED)
Change to voice recognition
B - PICK-UP BUTTON
Answer an incoming call
C - HANG-UP BUTTON
End a call or voice recognition
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
1. Press the HOME key
2. Touch SETTING, then BLUETOOTH
3.
Touch the NEW DEVICES. If the Bluetooth
® device is permitted to
pair then the SDA system will allow the connection to be made.
4. Go to your phone settings to confirm pairing
If you have paired multiple Bluetooth
® devices with your SDA
system, the Bluetooth® device that connected last will be selected
and will automatically connect when it is detected.
TO SELECT A DIFFERENT DEVICE:
1. Press the HOME key
2. Touch SETTING, then BLUETOOTH
3. Touch the PAIRED DEVICES
4. Touch the “device name” to connect
5. This will complete the selection of the Bluetooth
® device
BLUETOOTH® PAIRING
ABC
9INSTRUMENT PANEL
START/STOP ENGINE SWITCH (IF EQUIPPED WITH F.A.S.T.-KEY)
While carrying the F.A.S.T.-KEY within the
operating range, the Start/Stop Engine
Switch can be used to start the engine. • Move the selector lever in “P” position
and hold the brake pedal down. Push
the Start/Stop Engine Switch.
• To stop the engine, stop the vehicle
completely and move the selector
lever to “P” then press the Start/Stop
Engine Switch.
*If you have to bring the engine to an emergency stop while
driving, press and hold the Start/Stop Engine Switch for 3
seconds or more, or press it quickly 3 times or more.
• If you press the Start/Stop Engine Switch without depressing
the brake pedal, you can change the operation mode in the
order of OFF, ACC, ON, OFF.
* If the engine cannot be started by depressing the brake
pedal, depress the brake pedal more firmly than usual with
the right foot. Then, press the Stop/Start Engine Switch.
• If the engine cannot be started or the operation mode cannot
be changed, check the position of the F.A.S.T.-KEY or the
battery performance of the F.A.S.T.-KEY.
HEATED SEAT SWITCH (IF EQUIPPED)
POSITION ACTION
HI For quick heating
NEUTRAL Heater off
LO Keeps seat warm
