2019 MITSUBISHI L200 4WD

Rear differential lock*
If one wheel starts to spin freely and the vehi-
cle becomes stuck and cannot be freed even
using 4-wheel drive, the rear differential lock switch (A) can be used to activate the reardifferential lock for extra traction.
Operating the rear differential
lock
1. Bring the vehicle to a complete stop.
2. Move the drive mode-selector to “4L” or
“4H” position (Easy Select 4WD), “4LLc” or “4HLc” position (Super Se-
lect 4WD II).
3. To activate the rear differential lock,
press the rear differential lock switch(1).
4. To deactivate the rear differential lock,
press the rear differential lock switch(2).CAUT,ONz Operate the rear differential switch after the
wheels are stopped. Operating the switch with the wheels turning may cause the vehi-
cle to dart in unexpected directions.NOTEz The rear differential lock does not operate
when the drive mode-selector is in “2H” po-
sition (Easy Select 4WD), “2H” or “4H” po-
sition (Super Select 4WD II).NOTEz When the rear differential is locked with the
drive mode-selector in “4L” or “4H” posi-
tion (Easy Select 4WD), “4LLc” or “4HLc” position (Super Select 4WD II) changing the
drive mode-selector to “2H” position (Easy Select 4WD), “2H” or “4H” position (Super Select 4WD II) makes the rear differential unlock automatically.The rear differential lock indi-
cation lamp
When the ignition switch is turned to the
“ON” position or the operation mode is put in
ON, the rear differential lock indication lamp
(A) in the meter cluster illuminates for a few seconds then indicates the rear differential
lock’s operating status (activated or deactiva- ted).
Rear differential lock*
6-452.7((Starting and driving6 Easy select 4WD