2019 MERCEDES-BENZ SPRINTER bulb

Symbols
..................................................... 4At
ag lance ................................................. 6
Cockpit ........................................................ 6
Instrument clus ter. ...................................... 7
Overhead control panel ............................. 10
Doo rcontrol panel .................................... .14
Emergencies and breakdowns ................... 16Genera
lnotes .......................................... 18
Environmental pr otection .......................... 18
Mercedes-BenzG enuineParts. ..................18
Information abouta ttachments, add-
on equipment, ins tallation sand con‐
ve rsions .................................................... .19
Operating Instructions ...............................20
Service and vehicle operation ...................20
Operating saf ety. ...................................... .21
Declarations of conformity ........................ 22
Diagno stics connection ............................ .22
No tesonc hanges tothee ngine output ..... 23
Qualified specialis tworks hop .................... 23
Ve hicle registration ................................... 23
Cor rect us eoft hevehicle .........................23
Multi Purpose Vehicle ................................ 24
Information on problems wit hyour
ve hicle .......................................................24
Re portin gsafet yd efects ............................ 24
Limited Warrant y....................................... 24
QR codes forr escue car d.......................... 24
Dat astorage ..............................................25
Copyright .................................................. .27Occupant saf
ety...................................... 28
Re stra int sy stem ........................................28
Sea tbelts .................................................. 30
Airbag s...................................................... 32
Children in thev ehicle ...............................34
No tesonp etsint hevehicle ......................40 Opening and closing
...............................41
SmartK ey................................................... 41
Doo rs........................................................ 44
Sliding doo r............................................... 45
Electrica lsliding doo r................................ 46
Re ar-en ddoor s......................................... .50
Pa rtition sliding door .................................. 51
Electrica lstep. ........................................... 52
Side windo w..............................................53
Anti-thef tprotection ..................................55 Seats and
stowage .................................. 59
Co rrect driver's seat position .................... 59
Seats ......................................................... 59
Ad justing thes teering wheel ..................... 71
St ow agea reas .......................................... .72
Bottle holder .............................................. 74
Cup holder ................................................ .74
Ashtr ayand cigar ette lighter ...................... 74
Soc kets ...................................................... 75
Wi relessl ycharging them obile phone
and coupling wit hthe exterior antenna ..... 77
Ins talling or removing thef loor mats ......... 78 Light and vision
....................................... 79
Ex terior lighting ......................................... 79
Ad justing thei nterior lighting ..................... 81
Changin gbulbs .......................................... 83
Wi ndshield wipe rs..................................... 88
Mir rors ...................................................... 90
Using su nvisor s........................................ 92 Climat
econtrol ....................................... 93
Overvie wofclimatecontrol sy stems ......... 93
Operating climat econtrol sy stems ............ 95
Operating air vents .................................... 98
Au xilia ryheating ........................................99
Operating cargo compartment ventila‐
tio n.......................................................... 102 Drivin
gand pa rking .............................. 103
Driving .................................................... .103
Batter ymains witch................................. 11 4
Au tomatic transmission ........................... 11 5
All-whee ldrive .......................................... 11 8
DSR (Downhil lSpeed Regulation) ............ 12 0
Electroni cleve lcontrol ............................ 121
Re fueling ................................................ .125
Pa rking .................................................... 13 2
Driving and driving sa fety sy stems ..........1 36
Wo rkmode ............................................. .151
Tr ailer operation ...................................... .151 Instrument Displa
yand on-board
compu ter............................................... 15 8
Overvie wofInstrument Displa y............... 15 8
Overvie wofthe buttons on thes teer‐
ing wheel .................................................1 59
Operating theo n-boar dcomputer ........... 15 9
Overvie wofthe displa yson them ulti‐
function displa y....................................... 16 0
Setting thei nstrument lighting ................. 1612
Contents

Re
ar interior lighting #
1 Switches rear compartment/cargo com‐
partment lam ponoroff Motion de
tector &
WARNING Risk of inju ryby laser beam
from motion de tector
The motion de tector transmits invisible radia‐
tion from LED s(light-emitting diodes).
These LED sareclassified under the1Ml aser
class and can cause retina dama geinthef ol‐
lowing situations:
R Ifyo ul ook directly int othe unfiltered
laser beam from them otion de tector for
an extende dperiod
R Ifyo ul ook direct lyint ot he laser beam of
th em otion de tector wi thoptical instru‐
mentss uchase yeglasses or amagnifying
gl ass. #
Neverlook directly int othe laser beam. The motion de
tector is loca tedint he cargo com‐
partment behind thep artition ,inthe middle of
th er oof. 1
Position of motion de tector
If th ev ehicle is equipped wit hamotion de tector,
th ec argo compartmen tlighting is also activated
via them otion de tector.
If th em otion de tector de tects mo vement in the
cargo compa rtment whil ethe vehicle is station‐
ar y, thec argo compartmen tlighting switches on
fo ra pproxima tely tw om inutes.
The cargo compartment lighting can be switched
on via them otion de tector if:
R The vehicle is stationar y,thep arking brak eis
applied and theb rake pedal is no tbeing
depressed.
R Vehicles with automatic transmission: the
selector le verisinp osition005Dand youa re
no td epressing theb rake pedal.
R The vehicle has no tbeen loc kedf romt he out‐
side using thek ey.
If no chang etot hevehicle, suc hasadoor open‐
ing, is de tected over se veralh ours, them otion
de tector will au tomatically switc hoff.T his pre‐
ve nts theb atter yfromd ischarging. Changing bulbs
Instructions
forc hanging bulbs &
WARNING Risk of bu rnsf romh otcom‐
ponent parts whils treplacing abulb
Bulbs, lamps and plug connector scan
become very hotd uring operation.
When replacing abulb, youc oul db urny our‐
self on these componen tparts. #
Allo wthe component parts tocool
down befor ereplacing theb ulbs. Light and vision
83

When
youa re re placing thel ight bulb, obser ve
th ef ollowing:
R Do no tuse an ybulb that has been dropped or
has scratches on its glass tube .Otherwise,
th eb ulb ma yexplode.
R Theb ulb ma yexplod eifitish otor if you
to uch, drop or sc ratchi t.
R Stains on theg lass tube reduce theb ulb's
service life. Do no ttouc hthe glass tube with
yo ur bar ehands. If necessar y,clea nthe glass
tube wit halcohol or spirits in acolds tate and
wipe it down wit halint-freec loth.
R Protect bulbs from humidity and do no tbring
th em int ocontact wit hliquids.
Alw ayse nsur ethe bulbs ar efirml ysecured.
If yo ur vehicle is equipped wit hLED lamps, you
can checkt his as follo ws :the light cone will mo ve
from toptob ottomand bac kagain when the
engine starts .For this to wo rk,the lo wbeam
needs tohave been switched on befor ethe
engine is star ted.
Bulbs and lights ar eamajor par tofvehicle
saf ety. Therefore, ensur ethat they area lways
wo rking. Ha vetheh eadlam psetting checkedr eg‐
ular ly.
R Befor echanging thel amps, switc hoffthe
ve hicle's lighting sy stem. This will pr event a
sho rtcircuit.
R Use bulbs only in closed lights that ha vebeen
designed fort hem.
R Use onl yspar ebulbs of thes ame type and
wit hthe cor rect voltage.
If th en ew bulb also does no tlight up, consult a
qu alified specialis tworks hop. Re
placing fron tlight bulbs (vehicles with hal‐
ogen headlamps) Overvie
woffront bul btypes
Yo uc an chang ethe following bulbs. Halogen headlamps
1 High beam/daytime running la mps:
H1 555W /15W
2 Lowb eam/perime terl igh t:H7 55 W/W 5W
3 Turn signal: 345 7NAK 28 W
Changing the halogen headla mps
Re quirements:
R Lowb eam: light bulb type H7 55 W
R High beam/daytim erunnin glights: light
bulb type H1 555W/15W
R Perime terl ights: light bulb typ eW5W
R Turn signal indicators: bulb type 3457NAK
28 W 1
Lowb eam/perime terl ights housing co ver
2 High beam/daytim erunnin glights housing
co ver
3 Indicator soc ket #
Switc hoffthel ighting sy stem. 84
Light and vision

#
Lowb eam/perime terl ights: pull ba ck
housing co ver1. #
Pullo utthes ockettow ards ther ear. #
Remo vetheb ulb from thes ocket. #
Inse rtthen ew bulb int othe soc kets ucht hat
th eb ase of theb ulb restsf ullya gains tthe
base of thes ocket. #
Align and inser tthe soc ket. #
Attach housing co ver1. #
High beam/daytime running lights: pull
bac khousing co ver2. #
Turn thes ocketc ounter-clo ckwise and pull it
out. #
Remo vetheb ulb from thes ocket. #
Inse rtthen ew bulb int othe soc kets ucht hat
th eb ase of theb ulb restsf ullya gains tthe
base of thes ocket. #
Inse rtthes ocketa nd tur nitclock wise. #
Attach housing co ver2. #
Turn signal indicator: #
Turn soc ket 3counter-clo ckwise and
re mo veit. #
Gently tur nthe bulb counter-clockwise and
ta ke it out of thes ocket. #
Inse rtthen ew bulb int othe soc keta nd tur nit
clo ckwise. #
Inser tsocket 3and tur nitclock wise.
Ad ditional tur nsignal light
Re quirements:
R Ad
ditional tur nsignal light (all-wheel
driv evehicles): bulb typeP21W #
Switching of fthe lighting sy stem. #
Unscr ewscrews 1and remo velens 2. #
Gently tur nthe bulb counter-clockwise and
ta ke it out of thes ocket. #
Inse rtthen ew bulb int othe soc keta nd tur nit
clo ckwise. #
Place lens 2in position and tigh tent he
scr ews 1. Re
placing rear light bulb s(Cargo Vana nd
Pa ssenger Van) Overvie
wofrear bul btypes (Cargo Vana nd
Pa ssenger Van)
Yo uc an chang ethe following bulbs. Ve
hicles wit hstandar dtail lamps
1 Brak elights/tail lamps/pe rime terl ights:
P21W
2 Reversing lights: P21W
3 License plate lamp:W5W
4 Rear fogl ights: P21W
Yo uc an chang ethe following bulbs. Light and vision
85

Ve
hicles wit hpartial LED tail lamps
1 Reversing lights: P21W
2 License plate lamp:W5W
3 Rear fogl ights: P21W
Ta il lamps (Cargo Vana nd Passenger Van)
Re quirements:
R Brak
elights/tail lamps/perime terl ights:
light bulb typ eP21W
R Reversing lights: bulb typeP21W
R Rear fogl ights: bulb type P21W 1
Brak elights/tai llamps/perim eter lights
2 Reversing light
3 Rear fogl ight #
Switc hoffthel ighting sy stem. #
Open ther ear door. #
Toremo ve: loose nscrews 1and pull out
th et ail lamps in thed irection of thea rrow. #
Remo vethec onnector from bulb mount 3. #
Loosen scr ews2and remo vebulb mount
3 from thet ail lamp. #
Gently tur nthe bulb counter-clockwise and
ta ke it out of thes ocket. #
Inse rtthen ew bulb int othe soc keta nd tur nit
clo ckwise. #
Toinstall: setb ulb mount 3onthet ail lamp
and scr ewin scr ews2. #
Press thec onnector int obulb mount 3. #
Inser tthe tail lam pand scr ewin scr ews1.
License plat elamp
Re quirements:
R License plat elamp: light bulb type W5W 86
Light and vision

#
Switc hoffthel ighting sy stem. #
Place ascrew driver ,for example, at opening
2 between lamp 3and panel 1and care‐
full ypryofflamp 3. #
Remo velamp 3from panel 1. #
Rotate theb ulb holder byaround 45 °and
de tach it from thel amp. #
Remo vethel ight bulb. #
Inser tthe ne wbulb int othe bulb holder. #
Inser tthe bulb holder int othe lam pand
ro tate itby around 45°. #
Inser tthe lam pintot he panel opening until it
engages. Re
placing rear light bulb s(ch assis) Overvie
wofrear bul btypes (chassis)
Yo uc an chang ethe following bulbs. Ve
hicles wit hstandar dtail lamps
1 Clearance lamp: R5W
2 Tail light :R5W
3 Brak elight :P21W
4 Turn signals: PY 21 W
5 Reversing lights: P21W
6 Rear fogl ight (driver's side): P21W
7 License plate lamp:R5W Re
placing the tai llamps on the chassis
Re quirements:
R Rear fogl ights: bulb type P21W
R License pla telighting: bulb type R5W
R Reversing lights: bulb typeP21W
R Turn signal indicators: bulb type PY21 W
R Clearance lamp: bulb typeR5W
R Brak elight: bulb type P21W
R Taillight: bulb type R5W 1
Light lens
2 Screws
3 Rear fogl ight
4 License plat elamp
5 Reversing light
6 Turn signal indicator
7 Cleara nce lamp
8 Brak elight
9 Taillight #
Swit chofft he lighting sy stem. #
Unscr ewscrews 1and remo velight lens
2. #
Remo vethep lug connector from thel amp
car rier. #
Gentl yturnt he bulb counter-clockwise and
ta ke it out of thes ocket. #
Inse rtthen ew bulb int othe soc keta nd tur nit
clo ckwise. #
Position light lens 2and tighten scr ews1. Light and vision
87

Re
placing interio rlight bulbs Re
placing rear interior lamps
Re quirements:
% Fo
rthe standar dbulb failur eindicator func‐
tion towo rkcor rectly ,only lights bulbs must
be use dthat ar ethe same type and po weras
th ose ins talled during production. #
Swit chofft he interior lighting. #
Press in catc hspring of lens 1withas uita‐
ble object e.g. ascrew driver ,and then le ver
of ft he lens wit hthe lam phousing. #
Topull bac klen sf romt he lam phousing:
press thel ugs of lens 2inwa rds. #
Remo velight bulb 3from thel am ph ousing. #
Inser tthe ne wlight bulb. #
Inser tthe lens in thel am ph ousing until it
engages. #
Place thel ens wit hthe lam phousing in posi‐
tion and engag eit. Wi
ndshield wipers Switching
thef ront windshield wiper sonand
off 1
00D4 Singlew ipe/wiping wit hwashe rfluid
0047 005AWindshield wipe rsoff
0048 0062 Intermittent wiping, normal
Ve hicles wit hrain sensors: automatic wiping,
normal
0049 0063 Intermit tent wiping, frequent
Ve hicles wit hrain sensors: automatic wiping,
frequent
004A 00AA Continuous wiping, slow
004B 00A9 Continuous wiping, fast #
Turn thec ombination switc htothe cor re‐
sponding position 0047–004B. #
Single wipe/washing: presstheb utton on
th ec ombination switc hinthe direction of
ar row 1.
R 00D3 Single wipe
R 00D4 Wipes wit hwashe rfluid 88
Light and vision

wa
sher and thea ssociated spr aycould cause
considerable damag etothevehicle.
To avo id damag etoyourvehicle, obser vethef ol‐
lowing when using apowerwa sher:
R maintain aminimum dis tance of 11.8 in
(30 cm) tothev ehicle when using 25° flat-
spr aynozzle sand di rtgrinder sor27.6in
(70 cm) whe nusing round-spra ynozzle sand
obse rvet he information in thee quipment
manufacturer's operating instructions.
R do no tdirect then ozzle of thep owerwa sher
directl yatsensitiv eparts suc hastires, slits,
electrical components, batteries, light bulbs
and ventilation slits.
R maintai naminimum di stanc eof1 9.7 in
(50 cm) forar ear vie wcamera. Wa
shing thev ehicle byhand Obser
vethel egal requirements, fore xamp le in
man ycountries washing byhand is only allo wed
at speciall ydesignated wash ba ys.Int his case,
mak esuret hat aspeciall ydesignated wash ba yis
used forw ashing byhand. #
Use amild cleaning agent, e.g. car shampoo. #
Washthev ehicle wit hlukew armw ater and a
sof tcar sponge. When doing so, do not
ex pose thev ehicle todirect sunlight. #
Carefully spr aythev ehicle wit hwater and dry
of fw ithal eather clo th.Bec arefulnot to
point thew ater je tdirectl ytow ards thea ir
inle tgrilles. The blo wershould be switched
of fw hiled oing so. #
Do no tlet thec leaning agent dr yonthe paint‐
wo rk.
At theo nse tofw inter,remo veall traces of road
salt deposits carefull yand as soon as possible. Note
sonc areofp aint and matte finish *
NO
TEPaint wo rkdamag eand cor rosion
due toinadequat ecare Fa
ilur etop romp tly and thoroughly remo ve
dir tfromb irdd roppings or other residue
could result in paintwor kdamag eand cor ro‐
sion at alater date. #
Cleand irto ffpaint and matt efinish
th oroughly and as soon as possible. Maintenance and care
18 9