2019 MERCEDES-BENZ SPRINTER lock

Ad
justin gthe volume #
Toincrease volume: turnthe volume control
clockwise. #
Todec rease volume: turnthe volume con‐
trol coun ter-clockwise. #
Tomute: pressthev olume control. Sy
stem settings Au
dio settings Setting the sound
Multimedia sy
stem:
4 SETUP 5
Audio settings 5
Sound
Equalizer #
Select Bass,Middle orTreble . #
Chang ethe settings.
Balance and fader #
Select Balance orFader. #
Chang ethe settings.
Re setting audio settings
Multimedia sy stem:
4 SETUP 5
Audio settings #
Select Reset Audio Settings. #
Confir mwithYES.
The audio settings ar ereset. Setting
thet imeformat Multimedia sy
stem:
4 SETUP 5
Clock #
Select am/pm or24h. Re
setting to factorysettings Multimedi
asystem:
4 SETUP #
Select Factory settings. #
Confir mthe prom ptwith Yes.
The settings ar erese ttot hefactor ysettings. Showing the softwar
eversion Multimedia sy
stem:
4 SETUP #
Select Software Version: .
The cur rent softwar eversion is displa yed. Ra
dio Setting the frequency band
Multimedia sy
stem:
4 002A #
Press the002A button repeatedl yuntil the
desired transmission rang eiss et.
The transmissio nrang echanges in this order :FM
-D AB -AM.
% The
DABtransmission rang eisn otavailable
in all countries. Selecting
aradio station Multimedi
asystem:
4 002A
Setting astatio nusingthe frequency #
Press the0055 or0054 button tochang ethe
frequency.
% Press brief
ly:then extorp reviou sstatio nis
set.
Press and hold: scrollsstep-b y-step thro ugh
th ef requ encies.
Setting astatio nfromt hestation list #
Press or tur nthe right-han dside control
knob.
The statio nlistiss hown. #
Select astation.
The statio niss et.
Selecting stations via thes tatio npresets #
Call up thes tatio np resets (/ page167). #
Selec tastation.
The statio niss et. Saving
astatio nasa favo rite Re
quirements:
R DABorFMiss etas thet ransmission range
(/ page 168).
Multimedi asystem:
4 002A #
Setas tation #
Pres sthe 004B button.
The statio npresets ar eshown. #
Select aposition ,then press and hold 004B
or ther ight cont rolk no b.
The statio nselec tediss aved. 16 8
MB audios ystem

lation and an
yensuin gconsequences.
Obser vecountr y-specific la ws.
Mak esuret hat thel oad is secur ebefor eevery
jou rney and at regular inter vals during along
journe y.Ad jus tthe load securing as necessar y.
Information on ho wtosecureloads cor rectly can
be obtained from them anufacturer sofload
securing aids or tie downs forl oad-securing, for
ex ample.
When securing loads, obse rvet he following:
R Fill spaces between thel oad and thec argo
compartmen twalls or wheel wells. Forthis
purpose, use rigid load securing aids, suc has
we dges, wooden fixing sorp adding.
R Attach secured and stabilized loads in all
directions.
Use thec argo tie-down points or tie-down
ey es and thel oading rails in thec argo com‐
partmen toronthe load sur face.
Only use tie downs, suc haslashing rods, lock
ro ds or lashing nets and lashing stra ps, which
has been tested in accordance wit hcurrent
st andards (e.g. DI NEN). Alw aysu sethec argo
tie-down point closes ttothe load; pad sharp
edges.
Loads, and heavy loads in particular ,should
preferably be secured using thet ie-down
ey es.
% Yo
uw ill obtain tie downs tested in accord‐
ance wit hcurrent standards (e.g. DI NEN)
from an yspecialis tcompan yorfromaq uali‐
fi ed specialis tworks hop.
Note sont he partition
Wi thout apartition ,vehicles that ar eappr ove das
commercial vehicles (N1 ,N2) do no tfulfill ISO
27 956, whi chdescribes thee quipment forp rop‐
erly securing aloa dind elivery vehicles. If the
ve hicle is used totranspo rtgoods, retrofitting the
partition is stro ng lyrecommended ,asprope rly
securing thel oad in vehicles without apartition
will alw aysbeac omplexoperation. Overvie
wofcargo tie-down point Cargo tie-down points (e
xample:Passenger
Va n)
1 Tie-down eyes Cargo tie-down points (e
xample: Cargo Van
without loadin grails)
1 Tie-down eyes
Secur eloose loads wit hanapprove dlashing net
or atarp.
Al wa ys fast enthel ashing ne tortarptoa llav aila‐
ble cargo tie-down points .Makes uret hat thef as‐
te ning hoo ksares ecured agains tacciden tal
opening.
If yo ur vehicle is equipped wit hloading rails in
th ec argo compartmen tfloor ,you can place lash‐
ing rods directly in front of and behind thel oad.
The lashing rods directly absorb thep otential
shifting forc es.
Securing loads on thec argo compartmen tfloor
by lashing them down is onl yrecommended for Tr
ansporting 175

light
weight loads. La yanti-slip mats underneath
th el oad tosecur ethe load additionally. Installing and
removing tie-down eyes #
Toinstall: slidethet ie-down eyet hrough a
re cess in thel oading rail close tothel oad
until locking mechanism engages in the
re cess.
% Whe
nyou pull locking mechanism up and out
of ther ecess, thet ie-down eyeisa bleto
mo vewithin thel oading rail. Mak esuret hat
locking mechanism is alw ayse ngaged in a
re cess. #
Che ckthet ie-down eyef or firm seating. #
Toremo ve: pull lo cking mechanism up and
pull thet ie-down eyet ow ards thel ocking
mechanism and out of thel oading rail
th ro ugh arecess. Car
rier sy stems Information abou
tthe roof rack &
WARNING Risk of inju rydue tothem axi‐
mum roof load being exceeded
When youp laceal oad on ther oof as well as
all outer and inner attachments, thev ehicle's
center of gr avity will rise and thef amiliar driv‐
ing characteristic saswell asthes teering and
braking characteristic swillch ange. When
drivin garound bends, thev ehicle will tilt
mor eheavily and ma yreact mor esluggishly
to steering mo vements.
If yo ue xceed them aximum roof load, the
driving characteristics, as well as thes teering
and braking, will be greatl yimp aired. #
Nevere xceed them aximum roof load
and adjus tyour driving style. 1
Mountin grails
Informatio nabout them aximum roof load can be
fo und in the" Tech nical data" section
(/ page253).
Obser vethef ollowing points fora ssembling roof
ra ck s:
R Tighten ther oof rack 's scr ewstoat orque of
6.0 lb-f t(8N m)–7.4 lb-f t(10 Nm) in thed es‐
ignated groo vedp lates.
R The tightened scr ewsshould no ttouc hthe
ra ils.
R Ensur ethat theg roove dplates ar enotloca‐
te dint he areas around thep lastic caps.
R The groo vedp lates mus thave ther ight cross-
sectio n.
R The insides of them ounting rails mus tbefree
of dirt.
R Re-tigh tent he scr ewsu niformly af tera round
300 mile s(500 km).
Mercedes-Benz recommends that youu se on ly
ro of rack st hat ha vebeen tested and appr oved
fo rM ercedes-Benz. These help topreve ntvehicle
damage.
If yo uw ant toretrofit them ounting rails, ha ve
th em ins talled at aqualified specialis tworks hop.
Otherwise, youc oul dd amag ethe vehicle.
If yo ur vehicle is ins talled wit hmountin grails on
th er oof, youc an install aroof rack on ther oof.
Special fastener s(sliding bloc ks)a re available as
accesso ries fort his purpose.
These fastener sareavailable from an yauthorized
Mercedes-Ben zCenter. 176
Transporting

#
Tomo vether ackr ails: unscr ewstar knobs
7 coun ter-clockwise until they ares lightly
loose. #
Sliderackr ail 2 along roof rail1 tothe
desired position. #
Screw star knobs 7tight clo ckwise. #
Chec kthat ther ackr ail is seated securely.
Moving thes liders &
WARNING Risk of inju rydue toinade‐
qu atel ysecured loads
If th es lider of thei nterior roof rack system is
no te ngaged proper ly,t he load ma ycome
loose, fall down and injur epeople, for
ins tance when they enter or load and unload
th ec argo compartment. #
Alwayse ngag ethe slider properly. %
Ring
8of slider 4mus talway sbeatan
angle of 90° torack rail2,sot hat slider 4
is engaged proper ly. #
When ther ing of thes lider is at an angle
of 90° tother ackr ail: pullring 8of slider
4 down an dsimul taneously mo veslider 4
to thed esired position. #
Release ring 8 atthed esired position. #
Moveslider 4slightl yfurther along on rack
ra il2 until slider 4engages automaticall y. #
When ther ing of thes lider is pa rallel to
th er ackr ail: moveslider 4tothed esired
position. #
Position ring 8 of slider 4at an angle of
90° torack rail2.
Slider 4is engaged. Ad
justin gthe belt strap #
Press and hold thel ocking mechanism on
slider 9. #
Pull or release belt strap 5. #
Release thel ocking mechanism on slider 9.
% When securing or loosening
aload, be sure
to nots tand unde rthe load.
Securing and loosening thel oad #
Tosecur ethe load: placethel oad in theb elt
st ra ps of ther ackr ails. #
Fasten thel oad flush wit hthe partition. #
Secur ebelt strap 5. #
Chec kthat thel oad is seated securel y. #
Toloosen thel oad: press and hold thel ock‐
ing mechanism on slider 9. #
Pull ring 8 ofthes lider down and simultane‐
ously mo vethes lider away from thel oad. #
Loosen belt strap 5and at thes ame time
mak esuret hat thel oad does no tfall out of
th eb elt stra ps. #
Remo vethel oad from theb elt stra ps.
Installing cargo tie down rings 17 8
Transporting

&
WARNING Risk offire and injur yfrom
engine oil
If engine oil comes int ocontact wi thhotc om‐
ponent parts in thee ngine compartment, it
ma yignite. #
Mak esuret hat no engine oil is spilled
next tothef iller opening. #
Allo wthe engine tocool of fand thor‐
oughly clean thee ngine oil from compo‐
nent parts befor estartin gt he vehicle. *
NO
TEEngine damag eduetoincor rect oil
fi lter ,incor rect oil or additi ve #
Do no tuse engine oi loranoilfilter with
specifications deviatin gfromt hose
re qu ired fort he prescribed service
inter vals.
Mercedes-Benz recommends using original or
te sted replacement and service parts. #
Do no tchang ethe engine oil or oil filter
in order tosetc hang einter vals longer
th an those prescribed. #
Do no tuse an yadditive. #
Followt he instructions on thes ervice
inter vald ispla yfor changing thee ngine
oil. *
NO
TEDama gecaused byaddin gtoo
muc hengine oil To
om uche ngine oil can damag ethe engine
or thec atalytic con verter. #
Have excess engine oil remo vedata
qu alified specialis tworks hop. Engine OM651
Engine OM642
#
Turn cap 1counter-clockwise and remo veit. #
Adde ngin eoil. #
Replace cap 1and tur nitclockwise until it
engages. #
Chec kthe oil le vela ga in .C hec kusing theo n-
boar dcomputer (/ page183) ,chec kwith
th eo il dipstic k(/pag e182). Che
cking thec oolant le vel &
WARNING Risk of bu rnsf romh otcom‐
ponent parts in thee ngine compartment
Cer tainc omponents in thee ngine compart‐
ment can be very hot, e.g. thee ngine, the
ra diator and parts of thee xhau stsystem. #
Allo wthe engine tocool down and only
to uc hc omponent parts desc ribed in the
fo llowing. 184
Maintenance and care

If
yo uh ave tocar ryout an yworkint he engine
compartment, touc ho nlyt he following compo‐
nents:
R Hood
R Engine oil filler openin gcap
R Washer fluid reser voir cap
R Coolant expansion reser voir cap &
WARNING Danger of bu rnsw hen open‐
ing theh ood
If yo uo pen theh ood when thee ngine has
ove rheated or during afireint he engine com‐
partment, youc oul dc om eintoc ontact wi th
ho tg ases or other escaping operating fluids. #
Befor eopening theh ood, allo wthe
engine tocool down. #
Inthee vent of afireint he engine com‐
partment, keep theh ood closed and call
th ef ires ervice. &
WARNING Risk of scalding from hot
coolant
The engine cooling sy stem is pressurized,
particular lywhen thee ngine is warm.Ify ou
open thec ap, youc oul dbes calded byhot
coolant spr aying out. #
Letthe engine cool down befor eopen‐
ing thec ap. #
When opening thec ap, wear pr otective
gl ove sand saf etyg lasses. #
Open thec ap slowl ytorelease pres‐
sure. Allo
wthe engine and thee ngine cooling sy stem
to cool down befor echecking thec oolant le velor
re filling coolant.
* NO
TEPaint wo rkdamag eduetocoolant If coolant
getsonp ainted sur faces, thep aint‐
wo rkcan be damaged. #
Addc oolant carefully. #
Remo vespilledc oolant. Checking
thec oolant le vel Example: coolant
expansion reser voir #
Park thev ehicle on an even sur face. #
Ope nthe hood (/ page180). #
Slowly tur ncoolant expansion reser voir cap
1 half aturnc oun ter-clockwise and allow
exc ess pressur etoescape. #
Turn coolant expansion reser voir cap 1fur‐
th er and remo veit. #
Chec kthe coolant le vel.
Ther eise nough coolan tincoolan texpansion
re ser voir if thec oolant reaches theM AX
mar k.
Ad ding coolant #
Refill th ec oolant totheM AX mar konthe
coolant expansion reser voir.
Onl yuse coolan tappr oved byMercedes-Benzto
avo id damagin gthe engine cooling sy stem. #
Replace coolant expansion reser voir cap 1
and tigh tenina clockwise direction. #
Startt he engine. #
Aftera pproxima tely five minutes, switc hoff
th ee ngine again and allo wittocool down. #
Che ckthec oolant le vela ga in and add coolant
if necessar y.
% Obser
veadditional coolant information
(/ page246). Maintenance and care
18 5

Example: jump-s
tart connection point
% Right-hand-driv
evehicles: thej ump-s tart
connection points ma ybeonthe opposite
side. #
Remo vethec ove rfromt he positiv eterminal
on thed onor batter y. #
First,c onnec tthe positiv eterminal clam pof
th ej umper cables/charging cables tothe
positiv eterminal of theo ther vehicle's bat‐
te ry. #
With positiv eterminal clamp 2ofthe
jumper cable ,slide ther ed pr otectiv ecap on
jump-s tart connection point 1back witha
clockwis eturn. #
Connect thep ositiv eterminal clam ptothe
positiv eterminal of jump-s tart connection
point 1. #
During starting assistance: star tt he engine
of thed onor vehicle and le titrun at idle
speed. #
Connect then egativ eterminal of thed onor
batter ytothe ground point of your ow nv ehi‐
cle wit hthe jumper cable/charging cable.
Begin wit hthe donor batter y. #
During starting assistance: star tt he engine
on your ow nv ehicle. #
When charging: star tt he chargin gprocess. #
During starting assistance: lett he engine
ru nf or afew minutes. #
During starting assistance: beforediscon‐
necting thej umper cable, switc honanelec‐
trical consumer on your ow nv ehicle, e.g. the
re ar wind owheater or lighting.
When thes tartin ga ssis tance/charging proces sis
comple te: #
First,r emo vethej umper cables/charging
cables from theg round point and negative
te rm inal of theo ther vehicle's batter y,then
from thep ositiv eterminal of jump-s tart con‐
nectio npoint 1and thep ositiv eterminal of
th eo ther vehicle's batter y.Eac htime ,begin
at thec ontacts on your ow nv ehicle.
The redp rotectiv ecap springs bac ktoits ini‐
tial position when positiv eterminal clamp 2
is disconnected from jump-s tartconnection
point 1.
Fu rther information can be obtained at aqualified
specialis tworks hop. Installing/removing
thef loor co vering (vehi‐
cles with rear wheel drive) &
WARNING Risk of accident du eto
object sinthe driver's foot we ll
Object sinthe driver's foot we ll ma yimp ede
pedal tr avel or bloc kadepressed pedal.
This jeopardizes theo perating and road
saf etyoft hevehicle. #
Stow all object sinthevehicle securely
so that they canno tget intot he driver's
fo ot we ll. #
Ensur efloor mats and carpets cannot
slip and pr ovide suf ficient room fort he
pedals. #
Do no tlay multiple floor mats or carpets
on topofo ne ano ther. #
Switc hoffall electrical consumers. #
Toremo ve: unscr ewscrews 3and remo ve
trim 2. #
Remo vefloor co vering 1. Breakdown assis
tance 19 9

Otherwise, electrical assemblies, e.g.
th
ea lternator ,could be damaged. *
NO
TEDama getothev ehicle's electron‐
ics Incor
rectly disconnecting thea uxiliar ybattery
can cause damag etothevehicle's electron‐
ics. #
Alwaysd isconnect thea uxiliar ybattery
as described in thef ollowing sequence.
Do no treve rset he batter yterminals
under an ycircums tances. #
Obser vethes afet ym easures and pr otection
notices when disconnectin gthe auxiliar ybat‐
te ry ( / pag e197). #
Swit choffa ll electrical consumers. #
Switc hoffthee ngine and thep ower suppl y. #
Open theh ood (/ page180). #
Firstloosen and remo vethen egativ eterminal
clam pont he auxiliar ybatter ysot hatthe
cla mp is no longer in con tact wi th thetermi‐
nal. #
Remo vethep ositiv eterminal clam pcover. #
Loose nand remo vethep ositiv eterminal
clamp. To
wing or tow- starting Overvie
wofpermissible towing me thods In
thee vent of abreak down, Mercedes-Benz rec‐
ommends that youh ave thev ehicle transpor ted
ins tead of towe d.
* NO
TEDama getothev ehicle due to tow‐
ing away incor rectly #
Obser vethei nstruction sand no teson
to wing away. %
Ve
hicles with automatic transmission
and rear wheel drive: ifth er eisam alfunc‐
tion, thea utomatic transmission ma ybe
loc kedinp osition 005D.
If th ea utomatic transmission cann otbe shif‐
te dtop osition 005C,transpor tthe vehicle
(/ page204). Atow ing vehicle wit hlifting
equipment is requ ired forv ehicle transport.
Pe rm issible towing me thods Bo
th axle sont he
gr ound Fr
ont axle raised Re
ar axle raised
Ve hicles wit hauto‐
matic transmission and
re ar wheel drive Ye
s, no fur ther than
31 miles (50 km) at
31 mp h(50 km/h) Ye
s, no fur ther than
31 miles (50 km) at
31 mp h(50 km/h) Ye
s, if thes teering
wheel is fixe dint he
center position wit ha
st eering wheel lock
Ve hicles wit hall-wheel
drive Ye
s, no fur ther than
31 miles (50 km) at
31 mp h(50 km/h) No
No202
Breakdown assis tance