2019 MERCEDES-BENZ SL ROADSTER remote control

Qualified
specialist workshop ........... 28 R
RACE START
Import antsafety notes.................. 166
RACE START (Mercedes-AMG
vehicles) ............................................. 166
RACE TIMER (on-board computer,
Mercedes-AMG vehicles).................. 203
Rad io
Select ingastation .........................1 95
see Digita lOpera tor'sManu al
Radio mode
see also Digita lOpera tor'sMan-
ua l....... ..................... ......................243
Radio-w averece ption/ transmis-
sio nin the vehi cle
Decla rationof conformity ................27
REA CHRegul ation ...............................28
Readin glamp .....................................112
Rear foglamp
Displ aymessa ge....... ..................... 217
Rear lamps
see Ligh ts
Rear viewcamera
Cl eani nginstructio ns....... .............. 275
Displ ayinthe multimedi asys tem ..180
Function/notes .............................179
Switchi ngon/off ........................... 180
Rear window defros ter
Gene ralnotes ................................ 121
Prob lem(malfunction) ................... 121
Switchi ngon/off ........................... 121
Rear-vie wmirror
Dippi ng(automa tic)....... ................106
Refrig erant(air-conditioningsys-
tem)
Importa ntsafe tynotes .................. 326
Refue ling
Fuel gauge....... ................................ 33
Importa ntsafe tynotes .................. 144
Ref ueling proces s....... ................... 145
see Fuel
Remote control
Progra mming (garage door
opene r)....... ................................... 260 Replac
ingbulb s
Gene ralnotes ................................ 113
Reportin gsafety defects....... ............. 29
Resc uecard ......................................... 29
Rese rve(fue ltank)
see Fuel
Rese rvefuel
Displ aymessa ge....... ..................... 221
Warni nglamp ....... .......................... 239
Resi dual heat (climate control) ........122
Restrain tsyste m
Displ aymessa ge....... ..................... 214
Introducti on....... ..............................40
Warni nglamp ....... .......................... 238
Warni nglamp (function) ................... 41
Reve rsegear (selector lever) ....... ....136
Reve rsing feature
Side windows ................................... 87
Trunk lid....... ....................................82
Reve rsinglamps (displa ymes-
sag e)<0011001100110011001100110011001100110011001100110011001100110011
0011001100110011001100110011001100110011[ <0011001100110011001100110011001100110011001100110011001100110011
001100110011001100110011001100110011[ 217
Roads ideAssistanc e(b reakdo wn).... 26
Rol lbar
Disp laymess age<0011001100110011001100110011001100110011001100110011001100110011
001100110011001100110011001100110011001100110011[ 213
Ope ration<0011001100110011001100110011001100110011001100110011001100110011
0011001100110011001100110011001100110011001100110011001100110011
001100110011001100110011001100110011> 52
Rol lersun blind<0011001100110011001100110011001100110011001100110011001100110011
0011001100110011001100110011001100110011001100110011001100110011
0011001100110011> 94
Roo f
Disp laymes sage <0011001100110011001100110011001100110011001100110011001100110011
001100110011001100110011001100110011001100110011[ 230
Imp orta ntsafety notes <0011001100110011001100110011001100110011001100110011001100110011
0011001100110011[ 90
Ope ning/ closing (with roo f
sw itch) <0011001100110011001100110011001100110011001100110011001100110011
0011001100110011001100110011001100110011001100110011001100110011
0011001100110011001100110011001100110011001100110011> 91
Ope ning/ closing (with Smar tKey).... 92
Ove rview <0011001100110011001100110011001100110011001100110011001100110011
0011001100110011001100110011001100110011001100110011001100110011
0011001100110011001100110011001100110011> 90
Pro blem (ma lfunction) <0011001100110011001100110011001100110011001100110011001100110011
00110011001100110011[ 95
Re locking <0011001100110011001100110011001100110011001100110011001100110011
0011001100110011001100110011001100110011001100110011001100110011
001100110011001100110011001100110011> 92
Roo fsw itch<0011001100110011001100110011001100110011001100110011001100110011
0011001100110011001100110011001100110011001100110011001100110011
0011001100110011001100110011001100110011> 91
Route guidanc e
see also Digi talOpe rator'sMan-
ua l<0011001100110011001100110011001100110011001100110011001100110011
0011001100110011001100110011001100110011001100110011001100110011
0011001100110011001100110011001100110011001100110011001100110011
00110011[ 243
Route guidanc eacti ve<0011001100110011001100110011001100110011001100110011001100110011
001100110011001100110011[ 194 S
Safe ty
Ch ildre nin the vehicle<0011001100110011001100110011001100110011001100110011001100110011
00110011001100110011[ 57
see Occu pant safety
Safe tysys tem
see Drivi ngsafety system s 16
In
dex

Smar
tKey Import
antsafety notes G
WARNING
If children areleft unsupervised inthe vehi-
cle, they could:
R operate thevehicle's equipment
Additionally, childrencouldsetthe vehicle in
motion if,for example, they:
R release theparking brake
R shift theautomatic transmissionoutof
park position 005D
R start theengine
There isarisk ofan accident andinjury.
Never leavechildren oranimals unattended
in the vehicle.
When leaving thevehicle, alwaystake the
SmartK eywith youand lock thevehicle. This
also applie sfor the Digital Vehicle Keyifthe
"Digital Vehicle Key"functionisactivated via
Mercedes meconn ect. G
WARNING
If you attach heavyorlarge object sto the
SmartK ey,the SmartK eycould beuninten -
tionally turnedinthe ignition lock.This
could cause theengine tobe switched off.
There isarisk ofan accident.
Do not attach anyheavy orlarge object sto
the SmartK ey.Remove anybulky keyrings
before insertin gthe SmartK eyinto theigni-
tion lock.
! Keep
theSmartK eyaway fromstrongmag-
netic fields. Otherwise, theremote control
funct ioncould beaffected.
Str ong magnetic fieldscanoccur inthe
vicinity ofpowerful electrical installations.
Do not keep theSmartK ey:
R with electron icdevices, e.g.amobile phone
or another SmartKey
R with metallic objects,e.g. coins ormetal foil
R inside metallic objects,e.g. ametal case
This canaffect thefunct ionality ofthe
SmartK ey. Smar
tKeyfunctions 0043
0037 Locks thevehicle
0044 0054 Opens/c losesthetrunk lid
0087 0036 Unlock sthe vehicle
X To unlock centrally: pressthe0036 but-
ton.
If you donot open thevehicle withinapprox-
imately 40seconds ofunlocking:
R the vehicle islocked again.
R anti-t heftprotect ionisreactivated
X To lock centrally: pressthe0037 button.
The SmartK eycent rally locks/un locks:
R the doors
R the trunk lid
R the glove compartmen t
R the stowage compartmen tunder thearm-
rest
R the stowage compartmen tin the rear
R the fuel filler flap
The turn signals flashonce when unlocking
and three times whenlocking.
You canalso setanaudib lesignal toconfirm
that thevehicle hasbeen locked. Theaudib le
signal canbeactivated anddeactivated using
the on-board computer (Ypage 201).
When itis dark, thesurround lightingalso
comes onifit is activated inthe on-board
computer (Ypage 200). KEY
LESS-GO
General notes Bear
inmind thattheengine canbestarted by
any ofthe vehicle occupants ifthere isaKEY-
LES S-GO keyinthe vehicle (Ypage 128). 74
Smar
tKeyOpening andclosing

Problems
withtheSmar tKey Problem
Possible
causes/co nsequences and0050 0050
Solutions You
cannolonger lock
or unlock thevehicle
using theSmartK ey. The
SmartK eybattery isdischarged ornearly discharged.
X Check theSmartK eybattery (Ypage 77)and replace itifneces-
sary (Ypage 77).
If this does notwork:
X Unlock (Ypage 81)orlock (Ypage 81)thevehicle usingthe
mechanical key. There
isinterf erence fromapowerful sourceofradio waves.
X Unlock (Ypage 81)orlock (Ypage 81)thevehicle usingthe
mechanical key. The
SmartK eyisfaulty.
X Unlock (Ypage 81)orlock (Ypage 81)thevehicle usingthe
mechanical key.
X Have theSmartK eycheck edataquali fiedspecialist workshop. You
cannolonger lock
or unlock thevehicle
using KEYLE SS-GO. KEYLE
SS-GO was deactivated.
X Reactivate KEYLESS-GO (Ypage 74). The
SmartK eybattery isdischarged ornearly discharged.
X Check theSmartK eybattery (Ypage 77)and replace itifneces-
sary (Ypage 77).
If this does notwork:
X Unlock (Ypage 81)orlock (Ypage 81)thevehicle usingthe
mechanical key. There
isinterf erence fromapowerful sourceofradio waves.
X Unlock (Ypage 81)orlock (Ypage 81)thevehicle usingthe
mechanical key. KEYLE
SS-GO ismalfunction ing.
X Lock/ unlock thevehicle usingtheremote controlfunct ionofthe
SmartK ey.
X Have thevehicle andSmartK eycheck edataquali fiedspecialist
workshop.
If the vehicle canalso notbelocked/unlock edusing theremote
cont rolfunct ion:
X Unlock (Ypage 81)orlock (Ypage 81)thevehicle usingthe
mechanical key.
X Have thevehicle andSmartK eycheck edataquali fiedspecialist
workshop. 78
Smar
tKeyOpening andclosing

Key
isin the vehicle .This occurs, forexampl e,
when starting theengine.
To start thevehicle withoutactively usingthe
SmartKey:
R the Start/St opbutton mustbeinserted in
the ignition lock.
R the SmartKey mustbeinthe vehicle .
R the vehicle mustnotbelocked withthe
SmartKey orKEYLESS- GO(Ypage 74).
Do not keep theSmartKey:
R with electronic devices,e.g.amobil ephone
or another SmartKey.
R with metall icobjects, e.g.coins ormetal
foil.
R inside metallicobjects, e.g.ametal case.
This canimpa irthe functionali tyof the KEY-
LESS- GOkey.
If you lock thevehicle withtheSmartKey's
remote controlorwith KEYLESS- GO,after a
short time:
R you willnot beableto switch onthe ignition
with theStart/St opbutton.
R you willnot beableto start theengine with
the Start/St opbutton untilthevehicle is
unlocked again.
The engine canbeswitched offwhil ethe vehi-
cle isin motion bypressi ngand holdi ngthe
Start/St opbutton forthree seconds. This
function operatesindepe ndently ofthe ECO
start/stop automaticengine switch-off func-
tion.
Key positio nswith KEYLESS-GO 0043
Start/St opbutton
0044 Ignition lock
As soon asthe ignition isswitched on,allthe
indicator lampsin the instrument clusterlight
up. Further information onsitua tions where an
indicator lampeither failsto go out after start- ing
the engine orligh tsup whil edriving
(Y page 235).
If Start/St opbutton 0043has notyetbeen
pressed ,this corresponds tothe key being
removed fromtheignition.
X To swi tch onthe powe rsupply: press
Start/St opbutton 0043once.
The powe rsupp lyisswitched on.You can
now activate thewindsh ieldwipers, for
exampl e.
The powe rsupp lyisswitched offaga inif:
R the driver's doorisopened and
R you press Start/St opbutton 0043twice
when inthis positio n
X To swi tch onthe ignition: press Start/
Stop button 0043twice.
The ignition isswitched on.
If you press Start/St opbutton 0043once
when inthis positio n,the ignition is
switched offaga in.
Removing theStart/Stop button
You canremove theStart/St opbutton from
the ignition lockandstart thevehicle asnor-
mal using theSmartKey.
X Remove Start/Stopbutton 0043from ignition
lock 0044.
You donot have toremove theStart/St opbut-
ton from theignition lockwhen youleavethe
vehicle .You shoul d,howeve r,alw aystake the
SmartKey withyouwhen leaving thevehicle .
As long asthe SmartKey isin the vehicle :
R the vehicle canbestarted usingtheStart/
Stop button
R the electrical lypowe redequi pment canbe
opera ted Starting
theengi ne
Important safetynotes G
WARNING
If childre nare left unsup ervised inthe vehi-
cle, they could :
R opera tethe vehicle 'sequi pment Drivi
ng
127Drivi ngand parking
Z

garage
dooropener, contactanauthorized
Mercedes-B enzCenter.
Altern atively, youcan callthefollowing tele-
phone assistance services:
R USA: Mercedes-B enzCustomer Assistance
Center at1-80 0-FOR-MERCedes
R Canada: Customer Serviceat
1-80 0-38 7-0100
R HomeLink ®
hotline 1-800-355-3515(free of
charge)
More informat iononHomeLink ®
and/or com-
patible products isalso availa bleonline at
htt p:// www.homelink.c om.
Notes onthe declaration ofconf ormity
(Y page 27).
USA: FCCID:CB2HMIH L4
Canada: IC:279B -HMIH L4
Import antsafety notes G
WARNING
When youoperate orprogram thedoor with
the integrat edgarage dooropener, persons
in the range ofmovement ofthe door may
become trappedorbe struck bythe door.
There isarisk ofinjury.
When usingtheintegrat edgarage door
opener, alwaysmake surethatnobody is
within therange ofmovement ofthe door. G
DANGER
Combustion enginesemitpoisonous
exhaust gasessuchascarbon monoxide.
Inhaling theseexhaust gasesishazardous to
health andcanresult inpoisoning. Thereisa
risk offatal injury. Therefore, neverleavethe
engine runningan enclosed spacewithout
adequa tevent ilation.
Program ming Program
mingthebutt ons
Pay atten tiontothe "Important safetynotes"
(Y page 260). Garage
doorremote control0083 isnot included
with theintegrat edgarage dooropener.
X Turn theSmart Keytoposition 0048inthe igni-
tion lock (Ypage 126).
X Select oneofbutton s0044 to0085 touse to
cont rolthe garage doordrive.
X To star tprogr ammingmode: pressand
hold oneofbutton s0044 to0085 onthe integra-
ted garage dooropener.
The garage dooropener isnow inprogram-
ming mode. Afterashort time,indicator
lamp 0043lights upyellow .
Indicator lamp0043lights upyellow assoon
as button 0044,0087or0085 isstored forthe first
time. Ifthe selected buttonhasalready
been programed, indicatorlamp0043will only
light upyellow aftertenseconds have
elapsed.
X Release button0044,0087or0085. Indicator
lamp 0043flashes yellow.
X To progr amthe remote control: point
garage doorremote control0083 towards but-
tons 0044to0085 onthe rear-view mirrorata
distance of2to 8in (5 to 20 cm).
X Press andhold button 0084onremote control
0083 until indicator lamp0043lights upgreen.
When indicator lamp0043lights upgreen:
programming isfinished.
When indicator lamp0043flashes green:pro-
gramming wassuccessful. Thenext step is
to synchron izethe rolling code
(Y page 261).
X Release button0084onremote control0083 for
the garage doordrive system.
If indicator lamp0043lights upred: repeat the
programing procedureforthe correspon ding
button onthe rear-view mirror.Whendoing
so, vary thedistance between remotecon-
trol 0083and therear-view mirror. 260
Featur
esStowage andfeatu res

The
required distance between remotecon-
trol 0083and theintegr atedgarage door
opener depends onthe garage doordrive
system. Severalattemptsmight beneces-
sary. Youshould testevery position forat
least 25seconds beforetryinganother posi-
tion.
Synchronizing therolling code
Pay atten tiontothe "Importan tsafety notes"
(Y page 260).
If the garage doorsystem usesarolling code,
you willalso have tosynchron izethe garage
door system withtheintegr atedgarage door
opener inthe rear-view mirror.Todo this you
will need touse theprogramming buttonon
the door drive controlpanel. Theprogramming
button maybelocated indifferent places
depending onthe manufact urer.Itis usuall y
located onthe door drive unitonthe garage
ceiling.
Familiarize yourselfwiththegarage doordrive
operating instructions ,e.g. under "Program-
ming additional remotecontrols", before carry-
ing out thefollowing steps.
Your vehicle mustbewithin reachofthe
garage doororgate opener drive.Makesure
that neither yourvehicle norany persons/
object sare present withinthesweep ofthe
door orgate.
X Turn theSmart Keytoposition 0048inthe igni-
tion lock (Ypage 126).
X Get outofthe vehicle.
X Press theprogramming buttononthe door
drive unit.
Usually ,you now have 30seconds toinitiate
the next step.
X Get into thevehicle.
X Press previously programed button0044,0087
or 0085 onthe integr atedgarage dooropener
repeatedly untilthedoor closes.
The rolling codesynchron izationisthen
complete.
Notes onprogr ammingthe remot econ-
tr ol
Canadian radiofrequency lawsrequire a
"break" (orinter ruption) ofthe trans mission
signals afterbroadcasting forafew seconds.
Therefore, thesesignals maynotlast long
enough forthe integr atedgarage dooropener.
The signal isnot recogn izedduring program-
ming. Comparable withCanadian law,some U.S.
garage dooropeners alsofeature a
"break".
Proceed asfollows:
R ifyou liveinCanada.
R ifyou have difficulties programming the
garage dooropener (regardless ofwhere
you live) when following theprogramming
steps.
X Press andhold oneofbutton s0044 to0085 on
the integr atedgarage dooropener.
Aft erashort time,indicator lamp0043lights
up yellow.
X Release thebutton .
Indicat orlamp 0043flashes yellow.
X Press button 0084ofgarage doorremote con-
trol 0083for two seconds, thenrelease itfor
two seconds.
X Press button 0084again fortwo seconds.
X Repeat thissequence onbutton 0084of
remote control0083 until indicator lamp0043
lights upgreen.
When indicator lamp0043lights upgreen:
programming isfinished.
When indicator lamp0043flashes green:pro-
gramming wassuccessful. Thenext step is
to synchron izethe rolling code.
X Release button0084ofremote control0083 of
the garage doordrive.
When indicator lamp0043lights upred:
repeat theprogramming processforthe cor-
responding buttononthe rear-view mirror.
When doingso,vary thedistance between
remote control0083 and therear-view mirror.
The required distance between remotecon-
trol 0083and theintegr atedgarage door
opener depends onthe garage doordrive
system. Severalattemptsmight beneces-
sary. Youshould testevery position forat
least 25seconds beforetryinganother posi-
tion.
Problems whenprogramming
If you areexperienc ingproblems programming
the integr atedgarage dooropener onthe rear-
view mirror, takenoteof the following instruc-
tions:
R Check thetrans mitterfrequency usedby
garage doordrive remote control0083 and
whether itis supported. Thetrans mitterfre-
quency canusuall ybe found onthe back of
remote control0083 for the garage doordrive. Featur
es
261Stowage andfeatu res Z

The
integr atedgarage dooropener iscom-
patible withdevices thathave units which
operate inthe frequency rangeof280 to
433 MHz.
R Replace thebatteries ingarage doorremote
cont rol0083. This increases thelikelihood that
garage doorremote control0083 will trans mit
a stron gand precise signaltothe integr ated
garage dooropener.
R When programming, holdremote control0083
at varying distances andangles frombut-
ton s0044 to0085 which youareprogramming.
Try various anglesatadistance between
2and 8inches (5to20cm) oratthe same
angle butatvarying distances .
R Ifafurther remote control0083 isavailabl efor
the same garage doordrive, repeat the
same programming stepswiththisremote
cont rol0083. Before performin gthese steps,
make surethatnew batteries havebeen
installed ingarage doordrive remote control
0083.
R Note thatsome remote controlsonly trans -
mit foralimited amount oftime (theindica-
tor lamp onthe remote controlgoes out).
Press button 0084onremote control0083 again
before transmission ends.
R Align theanten nacable ofthe garage door
opener unit.Thiscanimprove signalrecep-
tion/ transmission.
Opening/clo singthegara gedoor Aft
erithas been programmed, theintegr ated
garage dooropener performs thefunct ionof
the garage doorsystem remote control.Please
also read theoperating instructions forthe
garage doorsystem.
X Turn theSmart Keytoposition 0048inthe igni-
tion lock (Ypage 126).
X Press either button 0044,0087or0085 which you
have programmed tooperate thegarage
door.
Garage doorsystem withafixed code: indi-
cator lamp0043lights upgreen.
Garage doorsystem witharolling code:indi-
cator lamp0043flashes green.
The trans mitterwill trans mitasignal aslong
as the button ispressed. Thetrans mission
is halted afteramaximum often seconds
and indicator lamp0043lights upyellow.
X Press button 0044,0087or0085 again ifneces-
sary. Clearing
thememor y Make
surethatyouclear thememory ofthe
integr atedgarage dooropener beforeselling
the vehicle.
X Turn theSmart Keytoposition 0048inthe igni-
tion lock (Ypage 126).
X Press andhold button s0044 and 0085.
The indicator lampinitially lightsupyellow
and then green.
X Release buttons0044 and 0085.
The memory ofthe integr atedgarage door
opener inthe rear-view mirroriscleared. Compass
Calling upthe compass Compass
0044display sthe compass directionin
which thevehicle iscurrent lytraveling: N N,
NE NE,
E E,
SE SE,
S S,
SW SW,
W W
or NW NW.
To receive acorrec tdisplay inrear-view mir-
ror 0043, thecompass mustbecalibrated and
the magnetic fieldzone set. 262
Featur
esStowage andfeatu res