2019 MERCEDES-BENZ E CLASS weight

Securingthechildrestraint system withtheseat belt onthe front passenger seat
When installing a belt-securedchildrestraintsystem onthe front passenger seat, alwaysobservethefollowing:
sObservethechildrestraint system manufac‐turer's installation and operating instruc‐tions.
sWhen using aforward-facingchildrestraintsystem in Group I:removethe headrestraint fromtherespective seat, if possi‐ble.
Whenyouremovethechildrestraint sys‐tem, installthe headrestraint again immedi‐ately and adjust allthe headrestraints cor‐rectly.
sThe backrestoftheforward-facingchildrestraint system must lie asflat as possibleagainstthe backrest ofthe front passengerseat.
sFor certainchildrestraint systems inweightgroup II or III,there may berestrictions inthe maximum size setting, e.g. duetopossi‐ble contact with theroof.
sThechildrestraint system must not be putunderstrain betweentheroof andthe seatcushion and/or be installedfacingthewrong direction.Adjustthe seat backrestinclination accordingly.
sThechildrestraint system must not be putunderstrainbythe headrestraints.Adjustthe headrestraints accordingly.
sNever place objects under or behindthechildrestraint system, e.g. cushions.
The seat belt onthe front passenger side isequipped with a special seatbeltretractor.
When activated,the special seatbeltretractorensuresthatthe seat belt does not slacken oncethechildrestraint system is secured(→page 53).
Setthe front passenger seat asfar back aspossible and movethe seat intothe highestposition.
Fullyretractthe seat cushion length adjust‐ment.
Adjustthe seat cushion inclination sothatthe front edge ofthe seat cushion is inthe
highest position andtherear edge oftheseat cushion is inthe lowestposition.
Setthe seat backresttoan almostverticalposition.
Installthechildrestraint system.The entire base ofthechildrestraint systemmust alwaysrestonthe seat cushion ofthefront passenger seat.
Always make surethatthe shoulder beltstrap is correctlyrouted fromthe seat beltoutlet ofthevehicletothe shoulder beltguide onthechildrestraint system.The shoulder beltstrap must beroutedfor‐wards and downwards fromthe seat belt out‐let.
If necessary,adjustthe seat belt outlet andthe front passenger seat accordingly.
Occupant safety59

\nWARNINGRisk of injuryfrom unsecureditems inthevehicle
If objects, luggage or loads are not securedor not secured sufficiently,theycould slip,tipover or bethrown around andthereby hitvehicle occupants.
There is arisk of injury,particularly intheevent of sudden braking or a suddenchangein direction.
Alwaysstowobjects in such awaythattheycannot bethrown around.
Beforethe journey,secure objects, lug‐gageor loads against slipping or tippingover.
\nWARNINGRisk of injuryduetoobjectsbeingstowed incorrectly
Ifyou do not adequatelystowobjects inthevehicle interior,theycould slip or betossedaround andtherebystrikevehicle occupants.In addition, cup holders, openstowagespaces and mobile phone brackets cannot
alwaysrestrainthe objectstheycontain intheevent of an accident.
There is arisk of injury,particularly intheevent of sudden braking or a suddenchangein direction.
Alwaysstowobjects in such awaythattheycannot betossed about inthese orsimilar situations.
Always make surethat objects do notproject fromstowage spaces, parcelnets orstowage nets.
Closethe lockablestowage spacesbeforestarting a journey.
Alwaysstowand secure objectsthatare heavy, hard, pointed, sharp-edged,fragile ortoo large inthe trunk.
\nWARNINGRisk of burning fromthetail‐pipe ortailpipe trim
Thetailpipe andtailpipe trim can becomeveryhot. Ifyou come into contact withthesecar parts,you could burnyourself.
Always be particularlycareful when inthe vicinity ofthetailpipe andtailpipetrims and supervisechildrenveryclosely when inthis area.
Before any contact, allowthe car partstocool down.
The drivingcharacteristics ofyourvehicle aredependent onthe distribution ofthe load withinthevehicle.You should bearthefollowing inmind when loadingthevehicle:
Rneverexceedthe permissible gross mass orthe gross axleweightratingforthevehicle(including occupants). Thevalues are speci‐fied onthevehicle identification plate onthevehicle's B-pillar.
Rthe load must not protrude abovethe upperedge ofthe seat backrests.
Ralways placethe load behind unoccupiedseats if possible.
Rsecurethe load usingthe tie-downeyes anddistributethe loadevenly.
Seats andstowing103

Towingthevehicle with bothaxles ontheground
Observethe notes onthe permittedtowingmethods (→page375).
Makesurethatthe battery is connected andcharged.
Observethefollowing points whenthe battery isdischarged:
RThe engine cannotbestarted
RThe electric parking brake cannotbereleased or applied
RVehicles with automatic transmission:The automatic transmission cannot be shif‐tedtoposition\\or].
Vehicles with automatic transmission:Ifthe automatic transmission cannotbe shif‐tedtoposition\\, orthe multifunction dis‐play inthe instrument cluster does not showanything, havethevehicle transportedaway(→page378).Atowingvehicle with liftingequipment isrequiredforvehicle transporta‐tion.
NOTEDamagedueto towingawayatexcessively high speeds orover long dis‐tances
The drivetrain could be damaged whentow‐ing atexcessively high speeds orover longdistances.
Atowing speed of 30mph (50 km/h)must not beexceeded.
Atowing distance of 30 miles (50 km)mustnot beexceeded.
\nWARNINGRisk of accident whentowingavehicle which istoo heavy
Ifthevehicle beingtow-started ortowedawayis heavierthanthe permissible grossmass ofyourvehicle,thefollowing situationscan occur:
RThetowingeye may become detached.
RThevehicle/trailer combination mayswerveorevenoverturn.
If anothervehicle istow-started ortowedaway, itsweight must notexceed
the permissible gross mass ofyourownvehicle.
If avehicle must betowstarted ortowedaway,its permissible gross mass must notexceedthepermissible gross mass ofthetowingvehicle.Information onthe permissible gross mass ofthevehicle can befound onthevehicle iden‐tification plate (→page417).
Vehicles with automatic transmission:Donot openthe driver's door or front passengerdoor,otherwisethe automatic transmissionautomatically shiftstoposition].Installingthetowingeye (→page 380).
Fastenthetow bar.
NOTEDamageduetoincorrect connec‐tion
Only connectthetowrope ortow bartothetowingeyes.
Deactivatingthe automatic locking mecha‐nism (→page 69).
Breakdown assistance377

Loadingthevehicle
Notes onTireand Loading Information plac‐ard
\nWARNINGRisk of accident fromoverloa‐ded tires
Overloaded tires mayoverheat and burstas aconsequence. Overloaded tires can alsoimpairthesteering and handlingcharacteris‐tics and leadtobrakefailure.
Observethe load-bearing capacity ofthe tires.
The load-bearing capacity must be atleast halfthe gross axleweightrating ofthevehicle.
Neveroverloadthe tiresby exceedingthe maximum load.
TheTireand Loading Information placard is onthe B-pillar onthe driver's side ofthevehicle.
1Tireand Loading Information placard
The data shown inthe illustration isexampledata.
TheTireand Loading Information placard shows:
RMaximum number of seats2accordingtothe maximum number of people permittedtotravel inthevehicle.
RMaximum permissible load3comprisesthegrossweight of allvehicle occupants, loadand luggage.
Wheels and tires393

RRecommended tire pressures1for coldtires. Therecommended tire pressures arevalidforthe maximum permissible load anduptothe maximum permissiblevehiclespeed.
Please also note:
RInformation on permissibleweights and loadsonthevehicle identification plate(→page417).
RInformation on tire pressure inthe tire pres‐suretable (→page 387).
Furtherrelated subjects:
RDeterminingthe maximum permissible load(→page 394)
RNotes on tire pressure (→page 386).
Determiningthe maximum permissible load
Thefollowingsteps havebeen developed asrequired of all manufacturers underTitle 49,Code ofU.S.FederalRegulations,Part575, pur‐suanttothe "NationalTraffic and MotorVehicleSafetyAct of1966".
Step 1:locatethestatement "The combinedweight of occupants and load should neverexceed XXXkgor XXX lbs." ("The combinedweight of occupants and load should neverexceed XXXkgor XXX lbs.") onyourvehicle'sTireand Loading Information placard.
Step 2:determinethe combinedweight ofthe driver and passengersthat will be travel‐ing inyourvehicle.
Step 3:subtractthe combinedweight ofthedriver and passengers from XXXkgorXXX lbs.
Step 4:theresultingfigure equalsthe per‐missible cargo and luggage load capacity.Forexample: If "XXX" equals1400 lbs andtherearefiveoccupants inyourvehicle with aweight of150 lbs each,the maximum cargoand luggage load capacity is 650 lbs (1400 -750 (5 x150) = 650 lbs).
Step 5:determinethe combinedweight ofluggage and loadthatthevehicle will be car‐rying.For safetyreasons,thisweight may notsafelyexceedtheavailable cargo and lug‐gageload capacity calculated instep 4.
Even ifyou havecalculatedthetotal load care‐fully,you shouldstill make surethatthe maxi‐mum permissible gross mass andthe maximumpermissible axle load ofyourvehicle are notexceeded. Details can befound onthevehicleidentification plate.
Haveyour loadedvehicle – including driver,occupants and load –weighed on avehicleweighbridge.The measuredvalues may notexceedthemaximum permissiblevaluesstated onthevehicle identification plate.
Furtherrelated subjects:
RCalculationexamplefor determiningthe max‐imum load (→page 395)
RTireand Loading Information placard(→page 393)
RTirepressuretable (→page 387)
RVehicle identification plate
394Wheels and tires

Calculationexamplefor determiningthemaximum load
Thefollowingtable showsexamples of howtocalculatetotal and load capacities withvarying
seating configurations and different numbersand sizes of occupants. Thefollowingexamplesuse a maximum load of1500 lbs (680kg).Thisisfor illustration purposes only.Make sureyou are usingthe actual load limitforyourvehi‐
clestated onyourvehicle'sTireand LoadingInformation placard (→page 393).
The highertheweight of allthe occupants,thesmallerthe maximum loadfor luggage.
Step 1
Example1Example 2
Combined maximumweight of occupants andload (data fromtheTireand Loading Informationplacard)
1500 lbs (680kg)1500 lbs (680kg)
Step 2
Example1Example 2
Number of people inthevehicle (driver andoccupants)51
Distribution ofthe occupantsFront: 2
Rear: 3
Front: 1
Wheels and tires395

Example1Example 2
Weight of occupantsOccupant 1:150 lbs (68kg)
Occupant 2:180 lbs (82kg)
Occupant 3:160 lbs (73kg)
Occupant 4:140 lbs (63kg)
Occupant 5:120 lbs (54kg)
Occupant 1: 200 lbs (91kg)
Totalweight of all occupants750 lbs (340kg)200 lbs (91kg)
Step 3
Example1Example 2
Permissible load (maximumgrossvehicleweightrating fromtheTireand Loading Informationplacard minusthe grossweight of all occupants)
1500 lbs (680kg)

The data shown inthe image isexampledata.
The TIN is a unique identification numbertoidentify tires and comprisesthefollowing:
RDOT (Department ofTransportation):tiresymbol marks1indicatingthatthe tirecomplies withtherequirements ofthe USDepartment ofTransportation.
RManufacturer identification code:manu‐facturer identification code2containsdetails ofthe tire manufacturer. New tireshavea code with two symbols.Retreadedtires havea code withfour symbols.Furtherinformation onretreaded tires (→page405).
RTiresize:identifier3describesthe tiresize.
RTiretype code:tire type code4can beusedbythe manufacturer as a codetodescribe specificcharacteristics ofthe tire.
RManufacturing date:manufacturing date5provides information aboutthe age of atire. The 1st and 2nd positionsrepresentthecalendarweek andthe 3rd and 4th positionsstatetheyear of manufacture (e.g. "3208"representsthe 32ndweek of 2008).
Information onthe maximum tire load
The data shown inthe image isexampledata.
Maximum tire load1isthe maximum permissi‐bleweightfor whichthe tire is approved.
Do notoverloadthe tiresby exceedingthe speci‐fied load limit. The maximum permissible loadcan befound onthevehicle'sTireand LoadingInformation placard onthe B-pillar onthe driv‐er's side (→page 393).
Specificationsfor maximum tire pressure
The datashown inthe image isexampledata.
Wheels and tires399