2019 MERCEDES-BENZ E CLASS display

RObjects or loads inthe trunk/cargo com‐partment cannotberestrainedbytheseat backrest.
Make surethatthe seat backrest andtherear benchseat/rear seat areengaged beforeeverytrip.
Ifthe seat backrest is not engaged and locked,this will be shown onthe multifunction displayonthe instrument cluster.
\nWARNINGRisk of injuryor death ifthepermissible gross mass ofthechild andchildrestraint system isexceeded
ForLATCH-type (ISOFIX)childrestraint sys‐tems in whichthechild is secured usingtheintegrated seat belt inthechildrestraint sys‐tem,the permissible gross mass ofthechildandchildrestraint system is73lb (33kg).
Ifthechild andthechildrestraint systemtogetherweigh morethan73lb (33kg),theLATCH-type (ISOFIX)childrestraint systemwith integrated seat belt does not offer suffi‐
cient protection. Anexcessive load may beplaced ontheLATCH-type (ISOFIX)child seatattachments andthechild may not berestrained intheevent of an accident,forexample.
Ifthechild andthechildrestraint sys‐temtogetherweigh morethan73lb(33kg), useonly aLATCH-type (ISOFIX)childrestraint systemthat securesthechild withthevehicle seat belt.
Also securethechildrestraint systemwiththeTopTether belt, ifavailable.
Always comply withthe information aboutthemass ofthechildrestraint system:
Rinthe manufacturer's installation and operat‐ing instructionsforthechildrestraint systemused
Ron a label onthechildrestraint system, ifpresent
Regularlycheckthatthe permissible gross massofthechild andchildrestraint system isstillcomplied with.
Whenyou are installing achildrestraint system,observethefollowing:
sAlways observethe correct use andthe suit‐ability ofthe seatsfor attaching achildrestraint system.
sAlways comply withthe manufacturer'sinstallation and operating instructionsforthechildrestraint system used.
sMake surethatthechild'sfeetdo nottouchthe front seat. If necessary,movethe frontseatforward slightly.
Whenyou are installing aLATCH-type(ISOFIX)childrestraint system, observethefol‐lowing:
sWhenyou are using a Group 0/0+ babycar seat and a Group 1rearward-facingchildrestraint system on arear seat:adjustthe front seat sothatthe seat doesnottouchthechildrestraint system.
sWhenyou are using a Group 1forward-facingchildrestraint system:the back‐restofthechildrestraint system must, as
54Occupant safety

far as possible, lieflat againstthe backrestofthevehicle seat.
sYou can havethe headrestraints oftherearseatsremoved and installedbyaqualifiedspecialistworkshop. This may be necessaryforthe use of certainchildrestraint sys‐tems.
sFor certainchildrestraint systems inweightgroup 2 or 3,there may berestrictions inthe maximum size setting, e.g. duetopossi‐ble contact with theroof.
sThechildrestraint system must not beten‐sioned betweentheroof andthe seat cush‐ion and/or be installedfacingthe wrongdirection. Where possible, adjustthe seatcushion inclination accordingly.
sThechildrestraint system must not be putunderstrainbythe headrestraints.Adjustthe headrestraints accordingly.
1LATCH-type (ISOFIX) mounting bracket
Beforeevery trip, make surethattheLATCH-type(ISOFIX)childrestraint system is engaged cor‐rectly in bothmounting brackets inthevehicle.
Removeandstowrelevant covers1.
AttachtheLATCH-type (ISOFIX)childrestraint systemtobothmounting bracketsinthevehicle.
Havingremovedthechild seat,re-attach cov‐ers1.
SecuringTopTether
\nWARNINGRisk of injuryor death iftherear seat backrests are not locked afterinstallingTopTether belts
Iftherear seat backrests are not locked,theycouldfoldforwards intheevent of an acci‐dent or during braking or suddenchanges ofdirection.
As aresult,childrestraint systems cannotperformtheir intended protective function.Rear seat backreststhat are not locked canalso cause additional injuries, e.g. intheevent of an accident.
Always lockrear seat backrests afterinstallingTopTether belts.
Observethe lockverification indicator.
Ifthe seat backrest is not engaged and locked,this will be shown onthe multifunction displayonthe instrument cluster.
Occupant safety55

Securingthechildrestraint system withtheseat belt
Securingthechildrestraint system withtheseat belt ontherear seat
\nWARNINGRisk of injuryiftherearbenchseat/rear seat and seat backrestare not engaged
Iftherear benchseat/rear seat and seatbackrest are not engagedtheycouldfoldfor‐wards, e.g. when braking suddenly or intheevent of an accident.
RIfthis isthe case,thevehicle occupantwould beforced intothe seat beltbytherear benchseat/rear seat orbythe seatbackrest. The seat belt cannotprotect asintended and couldresult in additionalinjury.
RObjects or loads inthe trunk/cargo com‐partment cannotberestrainedbytheseat backrest.
Make surethatthe seat backrest andtherear benchseat/rear seat areengaged beforeeverytrip.
Ifthe seat backrest is not engaged and locked,this will be shown onthe multifunction displayonthe instrument cluster.
When installing a belt-securedchildrestraintsystem, observethefollowing:
sAlways comply withthe manufacturer'sinstallation and operating instructionsforthechildrestraint system used.
sWhen using a category 0/0+ baby carseat and a category Irearward-facingchildrestraint system on arear seat:adjustthe front seat sothatthe seat doesnottouchthechildrestraint system.
sYou can havethe headrestraints oftherearseatsremoved and installedbyaqualifiedspecialistworkshop. This may be necessaryforthe use of certainchildrestraint sys‐tems.
sThe backrest oftheforward-facingchildrestraint system must, asfar as possible, be
resting onthe seat backrest oftherearseat.
sFor certainchildrestraint systems inweightcategory II or III,there may berestrictions inthe maximum size setting, e.g. duetopossi‐ble contact with theroof.
sThechildrestraint system must not be putunderstrain betweentheroof andthe seatcushion and/or be installedfacingthewrong direction. Where possible, adjusttheseat cushion inclination accordingly.
sThechildrestraint system must not be putunderstrainbythe headrestraints.Adjustthe headrestraints accordingly.
sMake surethatthechild'sfeetdo nottouchthe front seat. If necessary,movethe frontseatforward slightly.
The seat belts onthefollowing seats are equip‐ped with a special seat beltretractor:
RFront passenger seat
RRear seats
When enabled,the special seat beltretractorensuresthatthe seat belts ofthe front
Occupant safety57

Notes onthe correct driver's seat position
\nWARNINGRisk of injuryfrom adjustingthevehicle settings whilethevehicle is inmotion
You could lose control ofthevehicle inthefollowing situations:
Rifyou adjustthe driver's seat,the headrestraint,thesteering wheel orthe mirrorwhilethevehicle is in motion
Rifyoufastenyour seat belt whilethevehi‐cle is in motion
Beforestartingthe engine: adjustthedriver's seat,the headrestraint,thesteering wheel orthe mirror andfastenyour seat belt.Ensurethefollowing when adjustingsteeringwheel1, seat belt2and driver's seat3:
Ryou are asfarawayfromthe driver's airbagas possible
Ryou are sitting in an upright position
Ryourthighs are slightlysupportedbythe seatcushion
Ryour legs are not fullyextended andyou candepressthe pedals properly
Rthe back ofyour head is supported ateyelevelbythe center ofthe headrestraint
Ryou can holdthesteering wheel withyourarms slightly bent
Ryou can moveyour legs freely
Ryou can see allthe displaysonthe instru‐ment cluster clearly
Ryou havea goodoverview ofthe traffic con‐ditions
Ryour seat belt is pulled snuglyagainstyourbody and isrouted acrossthe center ofyourshoulder and acrossyour hips inthe pelvicarea
88Seats andstowing

Depending on whetherthe settingsforthe driveror front passenger seat are selected, onlytheselected seat can bereset.
Foldingthe front seat backrestforwards/back (vehicles with memoryfunction)
With the EASY-ENTRY function,the seat willmoveforwards ifyou havefoldedthe seat back‐restforwards. This makes it easierfor passen‐gerstoget into and out oftherear ofthevehi‐cle.
Tofoldforwards:pull seatrelease handle1andfoldthe seat backrestforwards asfaras it will go.The seat will moveautomaticallytothefore‐most position.
Tofold back:swing backthe seat backresthorizontally.Ifthe seat backrest is not engaged,this willbe shown onthe multifunction display ofthe
instrument cluster.Awarningtone will alsosound.
The seat will moveautomaticallytothestored position.Ifthe set seat position can no longer bereached,e.g. because of luggage intherearfootwell orafter occupants haveenteredtherear ofthevehicle:
Pull seatrelease handle1again andreturnthe seat backresttoan upright position.The seat will lock inthe newfore-and-aftposition.
Switching the seat heating on and off
\nWARNINGRisk of burns duetorepeat‐edly switching onthe seat heating
Repeatedly switching onthe seat heating cancausethe seat cushion and seat backrestpaddingtobecomeveryhot.
The health of persons with limitedtempera‐ture sensitivity or a limited abilitytoreacttohightemperatures may be affected ortheymayeven suffer burn-like injuries.
Seats andstowing95

If someone becomes trapped, press amemory position switch or seat adjust‐ment switch immediately.
\nWARNINGRisk of entrapment ifthememory function is activatedbychildren
Children could become trapped iftheyacti‐vatethe memory function, particularly whenunattended.
Never leavechildren unattended inthevehicle.
When leavingthevehicle, alwaystakethekey withyou and lockthevehicle.
The memory function can be used whenthe igni‐tion is switched off.
StoringSeat adjustmentsfor uptothree people can bestored and called up usingthe memory function.
Thefollowing systems can be selected:
RSeat, backrest and headrestraint
RSteering wheel
ROutside mirrors
RHead-up Display
Setthe seat,thesteering wheel,the Head-upDisplay andthe outside mirrorstothedesired position.
Press memory button Mtogether with one ofpreset position buttons1,2 or 3.An acoustic signal sounds. The settings arestored.Tocall up:press or brieflyhold preset posi‐tion button1,2 or 3.The front seat,thesteering column,theHead-up Display andthe outside mirror movetothestored position.
Stowage areas
Notes on loadingthevehicle
\nDANGERRisk ofexhaustgas poisoning
Combustion engines emit poisonousexhaustgases such as carbon monoxide. Exhaustgases can enterthevehicle interior ifthetrunk lid is open whenthe engine isrunning,especially ifthevehicle is in motion.
Always switch offthe engine beforeopeningthe trunk lid.
Never drive withthe trunk lid open.
102Seats andstowing

Foldingtherear seat backrest back
NOTEDamagetothe seat belt
The seat belt could become trapped andthusdamaged whenfolding backthe seat back‐rest.
Make surethatthe seat belt is not trap‐ped whenfolding backthe seat back‐rest.
Movethe driver's or front passenger seatfor‐wards, if necessary.
Fold corresponding seat backrest1backuntil it engages.Left andright seat backrests:ifthe seatbackrest is not engaged and locked,this willbe shown onthe multifunction display ontheinstrument cluster.
Center seat backrest:ifthe seat backrest isnot engaged and locked,red lockverificationindicator2will be visible.
Lockingtherelease catch ofthe centerrearseat backrest
Requirements:RThe left and center seat backrests areengaged and joinedtogether.
You can lockthe center seat backrestreleasecatchifyouwanttosecurethe trunk againstunauthorized access. The center seat backrestcanthen befoldedforwards onlytogether withthe left seat backrest.
106Seats andstowing

RThecharging function and wireless connec‐tion ofthe mobile phonetothevehicle'sexterior antenna are onlyavailable ifthe igni‐tion is switched on.
RSmall mobile phones may not be abletobecharged inevery position ofthe mobilephonestowage compartment.
RLargemobile phones which do notrestflat inthe mobile phonestowage compartment maynot be abletobecharged or connected withthevehicle'sexterior antenna.
RThe mobile phone may heat up duringthecharging process. The mobile phone can becooled inthe mobile phonestowage com‐partment whenthe air conditioning system isswitched on. The cooling output inthemobile phonestowage compartment is high‐est whenthe controller intheglove box isclosed.
RToensure more efficientcharging and con‐nection withthevehicle'sexterior antenna,removethe protective cover fromthe mobilephone.
RWhencharging,the mat should be used ifpossible.
Wirelesscharging ofthe mobile phone
Requirements:RThe mobile phone is suitablefor wirelesscharging (Qi-compatible mobile phone).Yo ucanfind a listof Qi-compatible mobilephones at:
http://www.mercedes-benz.com/connect
Placethe mobile phone as closetothe cen‐ter of mat1as possible withthe displayfacing upwards.Whenthecharging symbol is shown inthemultimedia system,the mobile phone isbeingcharged.
Malfunctions duringthecharging process areshown inthe multimedia system display.
The mat can beremovedfor cleaning, e.g.using clean, lukewarmwater.
Installing andremoving thefloor mats
\nWARNINGRisk of accident duetoobjects inthe driver'sfootwell
Objects inthe driver'sfootwell may impedepedal travel or block a depressed pedal.
This jeopardizesthe operating androadsafety ofthevehicle.
Stowall objects inthevehicle securelysothattheycannotgetintothe driver'sfootwell.
Seats andstowing11 5