X
Insert thenew bulbinto bulbholde r0044.
X Insert bulbholde r0044 and turn itclockwise.
X Press onhousi ngcover 0043and turn itto the
right.
X Repl acethecover inthe front wheel housing
(Y page 106).
High-be am<004B004800440047004F0044005000530056001200470044005C0057004C0050
0048> run-
ning lamps/parking lampsandstand-
ing lamps (halogenheadlamps) X
Switch offthe lights.
X Open thehood.
X Turn housi ngcover 0043<004600520058005100570048005500100046004F00520046004E005A004C0056
0048[ and
remove it.
X Turn bulbholde r0044 <004600520058005100570048005500100046004F00520046004E005A004C0056
0048[ and
pul lout.
X Insert thenew bulband engage itto the stop.
X Press onhousi ngcover 0043and turn itto the
right.
Turn signals(halog enheadlamps) X
Switch offthe lights.
X Open thehood.
X Turn bulbholde r0043 <004600520058005100570048005500100046004F00520046004E005A004C0056
0048[ and
pul lout. X
Turn thebulb<004600520058005100570048005500100046004F00520046004E005A004C0056
0048[ andpullit
out ofbul bholde r0043.
X Insert thenew bulbinto bulbholde r0043.
X Insert bulbholde r0043 and turn itclockwise
until itengages . Replaci
ngrear bulbs
Openin gand closing theside trim pan-
els View
ofright-hand sidetrimpanel
You must opentheside trimpanel inthe trunk
before youcan repla cethe bulbsinthe tail
lamp s.
X To open: releaseright orleft side trim
panel 0043atthe top and fold itdown inthe
direction ofthe arrow.
X To clo se: insert sidepanel 0043.
Tail lamps X
Switch offthe lights.
X Open thetrunk.
X Open theside trimpanel (Ypage 107). Replaci
ngbulbs
107Lights and windshie ldwipers Z
G
WARNING
Flamma blemateria lsintrodu cedthrough
environmental influence orby anima lscan
ignite ifin contact withtheexhau stsystem or
parts ofthe engine thatheatup. There isarisk
of fire.
Ca rry out regu larchecks tomake surethat
there arenoflamma bleforeig nmateria lsin
the engine compartment orinthe exhau st
system.
Gene ralnote s During
acold start, theengine runsathigh er
spee dstoenabl ethe catal yticconverter to
reach itsopera tingtempera ture.Thesound of
the engine maychange duringthis time.
Automatic transmissio n X
Shift thetransmissi ontoposi tion 005D
(Y pag e132) .
The transmissi onposi tion indica toronthe
multi function displayshow s005D
(Y pag e131) .
i You
canstart theengine intransmissi on
posi tions 005Dand 005C.
Starting procedurewith the SmartKey To
start theengine using the SmartKey instead
of the Start/Stop button,pullthe Start/Stop
button outofthe ignitio nlock.
X Turn theSmartKey toposi tion 0049inthe igni-
tion lock (Ypag e123) andrelease itas soon
as the engine isrunning.
Starting procedurewith the Start/Stop
button The
Start/Stop buttoncanbeused tostart the
vehicl emanua llywitho utinserting theSmartKey
into theignitio nlock. TheStart/Stop button
must beinserted inthe ignitio nlock andthe
SmartKey mustbeinthe vehicl e.This mode for
starting theengine operatesindep endently of
the ECO start/stop automatic enginestartfunc-
tion.
You canstart theengine ifavali dSmartKey isin
the vehicl e.Switch offthe engine andalways
take theSmartKey withyouwhen leaving the vehicl
e,even ifyou only leaveitfor ashort time.
Pay attention tothe importa ntsafety notes.
X Depress thebrake pedaland keep it
depre ssed.
X Press theStart/Stop buttononce
(Y pag e123) .
The engine starts.
Starting procedureviasmartphone Observe
theimporta ntsafety notesonstarting
the engine (Ypag e124) .
You canalsostart yourengine viayou rsmart-
phone fromoutsidethe vehicl e.In this case, the
previ ouslysele cted clima tecontrol settingis
activa ted.Inthis way youcan cool orheat the
interior ofthe vehicl ebefore starting thejour-
ney.
Only start theengine viayou rsmartpho neifit is
safe tostart andruntheengine whereyourvehi-
cle isparked .
Observe thelega lstipu lations inthe area where
you rvehicl eis parked .Engine startviasmart-
phone maybelimi ted tocertain countries or
regio ns.
You canexecute amaximu mof two consecutive
starting attempts viayou rsmartpho ne.Ifyou
insert theSmartKey intotheignitio nlock, you
can carry outtwo more starting attempts.
Once youhave started theengine, youcan
swi tch the engine offvia you rsmartpho neatany
time.
You canonly start theengine viayou rsmart-
phone if:
R the SmartKey isin the ignitio nlock
R park position 005Dissele cted
R the accele ratorpedalis not depre ssed
R the alarm for the anti-theft alarm system is
not set
R the pani cala rm isnot activa ted
R the hazard warninglamp sare switched off
R the hood isclosed
R the doors areclosed andlocked
R the windo wsand sliding sunroof areclosed
Also make surethat:
R the fuel tank issuffi ciently filled
R the starter battery hasbeen sufficiently
charge d Drivi
ng
125Drivi ngand parking Z
G
WARNING
Limbs couldbe crushe dor trappe difthe
engine isstarted unintentional lyduri ngser-
vice ormaintena ncework. There isarisk of
injury .
Alwa yssecure theengine against uninten-
tional starting beforecarryingout mainte-
nance orrepa irwork.
Make surethattheengine cannot bestarted via
you rsmartpho nebefore carryingout mainte-
nance orrepa irs.You canprevent anengine
start viayou rsmartpho ne,forexampl e,ifyou :
R swi tch onthe hazard warning lamp s
R do not lock thedoors
R open thehood Pulli
ngaway
Gene ralnote s G
WARNING
If the engine speedis abo vethe idling spee d
and youengag etransmissi onposi tion 003A
or 0046, thevehicl ecoul dpul lawa ysud denly .
There isarisk ofan accide nt.
When engagingtransmissi onposi tion 003A or
0046, alwaysfirmly depressthe brake pedal
and donot simu ltaneou slyaccele rate.
Depress theaccele ratorcarefu llywhen pulling
awa y.
The vehicl elocks centrally onceyouhave pulled
awa y.The locking knobsinthe doors dropdown.
You canopen thedoors fromtheinsid eat any
time.
You canalsodea ctivate theautomatic locking
featu re(Y pag e189).
Vehic leswith automatic transmission:itis
possi bletoshift thetransmissi onfrom position
005D tothe desi redposi tion only ifyou depre ss
the brake pedal.Only thencantheparki nglock
be dea ctivated.
All vehi cles(ex cept Merce des-AMGvehi -
cle s):ifyou donot depre ssthe brake pedal,the
DIRECT SELECT levercan stillbemoved butthe
parki nglock remai nsengag ed. Merce
des-AMGvehic les:if you donot depre ss
the brake pedal,the sele ctor levercan stillbe
moved buttheparki nglock remai nsengag ed.
At transmissi onfluidtempera turesbelow 00F84‡
(00F820 †),you can only shift outofposi tion 005D
into another transmissi onposi tion when the
engine isrunning.
i Upshi
ftstake placeathigh erengine speeds
after acold start. Thishelpsthe catal yticcon-
verter toreach itsopera tingtempera ture
more quickly.
Information onthe automatic release ofthe
electric parkingbrake (Ypag e145) .
Hill start assist Hill
start assisthelp syou when pulling away
forwa rdorinreverse onanuph illgrad ient. It
hold sthe vehicl efor ashort timeafter youhave
removed yourfoot from thebrake pedal.This
gives youenoug htime tomove yourfoot from
the brake pedalto the accele ratorpedaland to
depre ssitbefore thevehicl ebegi nstoroll . G
WARNING
After ashort time,hillstart assistwil lno lon-
ger brake yourvehicl eand itcoul droll awa y.
There isarisk ofan accide ntand injury .
There fore,quickly move yourfoot from the
brake pedalto the accele ratorpedal.Never
lea vethe vehicl ewhen itis held byhillstart
assi st.
Hill start assistisnot active if:
R you arepulling awayon aleve lroad oron a
dow nhill gradient.
R the transmissi onisin posi tion 005C.
R the electric parkingbrake isapp lied.
R ESP ®
is malfu nctioning.
Further informati ononhold ingthe vehicl esta-
tionary onuph illgrad ients (Ypag e135). EC
Ostart/stop function
Introduc tion The
ECO start/stop functionswitches the
engine offautomatical lyifthe vehicl eis stoppe d
under certain conditions. 126
Drivi
ngDrivi ngand parking
The
engine startsautomatically whenthedriver
wants topull away again. TheECO start/stop
funct ionthereby helpsyoutoreduce thefuel
consumpt ionand emissions ofyour vehicle.
Import antsafety notes G
WARNIN
G
If the engine isswitched offautomatically and
you exit thevehicle, theengine isrestart ed
automatically. Thevehicle maybegin moving.
There isarisk ofaccident andinjury.
If you wish toexit thevehicle, alwaysturn off
the ignition andsecure thevehicle against
rolling away.
General notes 0043
ECO start/stopdisplay
The ECO start/stopfunct ionisactivated when-
ever youstart theengine usingtheSmart Keyor
the Start /Stopbutton .
If the engine hasbeen switched offautomati-
cally bythe ECO start/stopfunct ion,the00D6
ECO symbol isshown inthe multifunct iondis-
play.
Mercedes-AMG vehicles:theECO start/stop
funct ionisonly availabl ein drive program C.
Automa ticengine switch-off If
the vehicle isbraked toastandst illin Dor N,
the ECO start/stopfunct ionswitches offthe
engine automatically.
The ECO start/stopfunct ionisoperational
when:
R the indicator lampinthe ECO button islit
green
R the outside temperat ureiswithin therange
that issuitable forthe system
R the engine isat normal operating temperature
R the settemperat ureforthe vehicle interior
has been reached R
the battery issufficient lycharged
R the system detectsthat thewindshield isnot
fogged upwhen theair-con ditioning systemis
switched on
R the hood isclosed
R the driver's doorisclosed andthedriver's
seat beltisfasten ed
All ofthe vehicle's systemsremainactivewhen
the engine isstopped automatically.
The HOLD functioncan also beactivated ifthe
engine hasbeen switched offautomatically. Itis
then notnecessary tocont inue applyi ngthe
brakes duringtheautomatic stopphase. When
you depress theaccelerator pedal,theengine
start sautomatically andthebraking effectof
the HOLD functionisdeactivated.
Automat icengine switch-offcan take place a
maximum offour times inarow (initial stop,then
three subsequent stops).
Automa ticengine start The
engine startsautomatically if:
R you switch offthe ECO start/stopfunct ionby
pressing theECO button
R in trans mission position 005Bor005C, thebrake
pedal isreleased andtheHOLD functionisnot
active
R you depress theaccelerator pedal
R you engage reverse gear005E
R you move thetrans mission outofposition 005D
R you unfasten yourseatbeltoropen thedriv-
er's door
R the vehicle startsto roll
R the brake system requires this
R the temperat ureinthe vehicle interiordevi-
ates from thesetrange
R the system detectsmoisture onthe wind-
shield whentheair-con ditioning systemis
switched on
R the battery's conditionofcharge istoo low
Shift ingthe trans mission toposition Pdoes not
start theengine. Driving
127Drivingandparking Z
When
indicator lamp0043flashes green:pro-
gramming wassuccessf ul.The next step isto
synchr onizetherolling code.
X Release button0084ofremot econt rol0083 ofthe
garage doordrive.
If indicator lamp0043lights upred: repeat the
programmin gprocess forthe corr esponding
button onthe rear-v iewmirror. Whendoing
so, vary thedistanc ebetween remotecont rol
0083 and therear-v iewmirror.
The required distancebetween remotecon-
trol 0083and theintegr atedgarage dooropener
depends onthe garage doordrive system.
Several attemptsmight beneces sary.You
should testevery position foratleast
25 secon dsbefore tryinganother position.
Problems whenprogram ming
If you areexperien cingproblems programmin g
the integr atedgarage dooropener onthe rear-
view mirror, takenoteof the following instruc-
tions :
R Check thetran smitt erfrequenc yused by
garage doordrive remot econt rol0083 and
whether itis supported. Thetransmitt erfre-
quency canusually befound onthe back of
remot econt rol0083 for the garage doordrive.
The integr atedgarage dooropener iscom-
patible withdevices thathave units which
operate inthe frequenc yrange of280 to
433 MHz.
R Replace thebatter iesingarage doorremot e
cont rol0083. This increases thelikelihood that
garage doorremot econt rol0083 will tran smit a
stron gand precise signaltothe integr ated
garage dooropener.
R When programmin g,hold remot econt rol0083
at varying distancesand angles frombut-
ton s0044 to0085 which youareprogrammin g.Try
various anglesatadistanc ebetween 2and
8 inches (5to20cm) oratthe same angle but
at varying distances.
R Ifanother remotecont rol0083 isavailable for
the same garage doordrive, repeat thesame
programmin gsteps withthisremot econt rol
0083. Before perform ingthese steps, makesure
that new batter ieshave been installed in
garage doordrive remot econt rol0083.
R Note thatsome remot econt rolsonly transmit
for alimited amount oftime (theindicator
lamp onthe remot econt rolgoes out).Press button
0084onremot econt rol0083 again before
tran smission ends.
R Align theanten nacable ofthe garage door
opener unit.Thiscanimprove signalrecep-
tion/ transmission.
Opening/closi ngthe gara gedoor Aft
erithas been programmed, theintegr ated
garage dooropener perform sthe funct ionofthe
garage doorsystem remotecont rol.Please also
read theoperating instruction sfor the garage
door system.
X Turn theSmart Keytoposition 2in the ignition
lock (Ypage 123).
X Press button 0044,0087or0085 which youhave
programmed tooperate thegarage door.
Garage doorsystem withafixed code: indi-
cator lamp0043lights upgreen.
Garage doorsystem witharolling code:indi-
cator lamp0043flashes green.
The transmitt erwill tran smit asignal aslong
as the button ispressed. Thetransmission is
halted afteramaximum often secon dsand
indicator lamp0043lights upyellow.
X Press button 0044,0087or0085 again ifneces sary.
Clearing thememor y Make
surethatyouclear thememory ofthe
integr atedgarage dooropener beforesellingthe
vehicle.
X Turn theSmart Keytoposition 2in the ignition
lock (Ypage 123).
X Press andhold button s0044 and 0085.
The indicator lampinitially lightsupyellow
and then green.
X Release buttons0044 and 0085.
The memory ofthe integr atedgarage door
opener inthe rear-v iewmirror iscleared. Featur
es
257Stowage andfeatures Z
X
Make surethatthewindshield wipersare
switched off.
X Pull release lever0043onthe hood.
The hood isreleased. X
Reach intothegap between thehood andthe
radiator trimandpress hoodcatch lever0044to
the left.
X Raise thehood. X
Pull support strut0085out ofbracket 0083.
X Lift upsupport strut0085and insert itinto yel-
low retaining clip0087. Closi
ngthe hood X
Raise thehood slightly and,atthe same time,
remove support strut0085from yellow retaining
clip 0087.
X Swing support strut0085down andpress itinto
bracket 0083until itengages.
X Lower thehood andletitfall from aheight of
approximately 8in (20 cm).
X Check thatthehood hasengaged properly.
If the hood canberaised slightly, itis not
properly engaged. Donot press thehood
closed. Openthehood again andclose itwith
a little more force. Engine
oil
General notes Depending
onyour driving style,thevehicle
consumes upto0.9 USqt(0.8 liters) ofoil per
600 miles (1,000 km).Theoilconsumption may
be higher thanthiswhen thevehicle isnew orif
you frequently driveathigh engine speeds.
Depending onthe engine, theoildipstick maybe
in adifferent location.
When checkingthe oillevel:
R park thevehicle onalevel surface
R the engine shouldbeswitched offfor approx-
imately fiveminutes ifthe engine isat normal
operating temperature
R ifthe engine isnot atnormal operating tem-
perature, e.g.ifthe engine wasonly started
briefly, waitabout 30minutes beforecarrying
out themeasurement
Checking theoillevel using theoildip-
stick G
WARNING
Certain componen tsinthe engine compart-
ment, suchasthe engine, radiator andparts
of the exhaust system,canbecome veryhot.
Working inthe engine compartmen tposes a
risk ofinjury.
Where possible, letthe engine cooldown and
touch onlythecomponen tsdescribed inthe
following. Engi
necompar tment
261Maintenance andcare Z
X
Hook clamps 0044into thefuse boxand close.
X Close thehood . Fus
ebo xin the front-pas sengerfoo t-
we ll X
To ope n:ope nthe front-pa ssengerdoo r.
X Re move thefloormat.
X Fold outperf orated floorcoveri ng0043 inthe
dir ectio nof the arro w. X
To release cover 0087,pres sretai ning
cla mp 0044.
X Fold outcover 0087inthe directio nof the arro w
to the catch. X
Re move cover 0087forw ards.
Fuse alloca tion chart 0085isloca tedonthe
low errigh t-hand sideof cover 0087.
X To close :inse rtcover 0087onthe left-hand side
of the fuse boxinto theretai ner.
Cov er0087 enga gesinthe retai ners.
X Fold downcover 0087until clamps 0044lock audi-
bly .
X Fold back perf orated floorcoveri ng0043.
X Instal lthe floormats. Fus
es
289Breakdow nassi stanc e Z