2019 MERCEDES-BENZ C CLASS stop start

Electric parking brake
Electric parking brake function (applyingautomatically)
\nWARNINGRisk of accident and injuryduetochildren and animals left unatten‐ded inthevehicle
Ifyou leavechildren and animals unattendedinthevehicle,theymay be abletosetthevehicle in motion,forexampleby:
RReleasingthe parking brake.
RShiftingthe automatic transmission outof park position].
RStartingthe engine.
In addition,theymay operatevehicle equip‐ment and become trapped.
Never leavechildren and animals unat‐tended inthevehicle.
When leavingthevehicle, alwaystakethe SmartKeywithyou and lockthevehicle.
The electric parking brake is applied ifthe trans‐mission is in position]and one ofthefollow‐ing conditions is fulfilled:
RThe engine is switched off.
RThe seat belttongue is not inserted intheseat belt buckle ofthe driver's seat andthedriver's door is opened.
Toprevent application: pullthe handle oftheelectric parking brake.
Inthefollowing situations,the electric parkingbrake is also applied:
RActive Distance AssistDISTRONIC is bringingthevehicletoastandstill.
RThe HOLD function iskeepingthevehiclesta‐tionary.
RActiveParking Assist iskeepingthevehiclestationary.
This isthe case if one ofthefollowing conditionsis also fulfilled:
RThe engine is switched off.
RThe seat belttongue is not inserted intheseat belt buckle ofthe driver's seat andthedriver's door is opened.
RThere is a system malfunction.
RThe power supply is insufficient.
RThevehicle isstationaryfor a lengthyperiod.
Whenthe electric parking brake is applied,theredI(USA) or$(Canada) indicator lampappears inthe instrument cluster.
The electric parking brake is not automaticallyapplied ifthe engine is switched offbythe ECOstart/stop function.
Electric parking brake function (releasingautomatically)
The electric parking brake isreleased whenthefollowing conditions are fulfilled:
RThe engine isrunning.
RThe seat belttongue is inserted intothe seatbelt buckle ofthe driver's seat.
RThe transmission is in position[or^andyou depressthe accelerator pedal oryou
16 8Driving and parking

Function oftheradar sensors
Some driving and driving safety systems useradar sensorstomonitorthe area in front of,behind or nexttothevehicle (depending onthevehicle's equipment).
Depending onthevehicle's equipment,theradarsensors are integrated behindthe bumpersand/or behindthe Mercedesstar.Keeptheseparts free of dirt, ice and slush(page 364). The sensors must not be cov‐ered,forexamplebycycleracks,overhangingloads,stickers,foil orfoilstoprotect againststonechipping. Intheevent of damagetothebumpers orradiator grill, orfollowing a collisionimpactingthe bumpers orradiator grill, havethefunction oftheradar sensorschecked at aquali‐fied specialistworkshop. The driver assistancesystem may no longerworkproperly.
Overview of driving systems and drivingsafety systems
Inthis section,you willfind information aboutthefollowing driving systems and driving safetysystems:
R360° Camera (page 206)
RABS (Anti-lockBrakingSystem)(page171)
RActive Distance AssistDISTRONIC(page183)
RAIRMATIC (page197)
RActive Brake Assist (page175)
RActive LaneKeeping Assist (page 222)
RATTENTION ASSIST (page215)
RBAS (BrakeAssistSystem) (page172)
RHillStart Assist (page195)
RDYNAMICBODYCONTROL (page196)
REBD (ElectronicBrakeforceDistribution)(page175)
RESP®(ElectronicStabilityProgram)(page172)
RActive Speed Limit Assist (page187)
RHOLD function (page195)
RSTEER CONTROL (page175)
RActiveSteering Assist (page189)
RActiveParking Assist (page 209)
RParking AssistPARKTRONIC(page 200)
RRear view camera (page 204)
RCruise control (page181)
RFunction of Blind Spot AssistandActive BlindSpot Assistwithexitwarning(page219)
RTraffic Sign Assist (page217)
Function of ABS (Anti-lock Braking System)
ABSregulatesthe brake pressure in critical driv‐ing situations:
RDuring braking, e.g. at full brake applicationor insufficient tire traction,the wheels areprevented from locking.
RVehiclesteerability while braking is ensured.
Driving and parking171

If novehicle is detected inthe adjacent lane anda lanechange is permitted,the lanechangebegins. This is showntothe driver with a greenarrow2nexttothesteering wheel symbol.TheLane Change to the Leftmessage alsoappears,forexample. IfActive Lane ChangeAssisthas been activated withthe turn signalindicator but a lanechange is not immediatelypossible, a grayarrow1appears nexttothesteering wheel symbol, whichremains green.
Whenthe lanechange assistancestarts,the turnsignal indicator is automatically activated besidethe display inthe multifunction display.
Ifthe assistance graphic is shown whenchang‐ing lanes,the lanechange display appears with
an additional arrowpointingtowardsthe adja‐cent lane (page193).
If a lanechange is not possible,the arrow fadesout after afew seconds and a new lanechangemust be initiated. An immediate lanechange isonly possible on freeway sections without speedlimits.
Ifthe system is impaired,Active Lane ChangeAssistmay be canceled. If it is canceled,theLane Change Canceledmessage appears inthemultifunction display and awarningtone sounds.
\nWARNINGRisk of accident fromchang‐ing lanetoan occupied adjacent lane
Lane ChangeAssistcannot alwaysdetectclearly ifthe adjacent lane is free.
The lanechange might be initiated althoughthe adjacent lane is not free.
Beforechanging lanes, make surethatthe neighboring lane is free andthere isno dangerto otherroad users.
Monitorthe lanechange.
\nWARNINGRisk of accident if LaneChange Assistunexpectedlystops func‐tioning
Ifthe system limitationsfor Lane ChangeAssist havebeenreached,there is no guar‐anteethatthe system willremain active.
Lane Change Assist cannotthen assistyoubyapplyingsteeringtorques.
Always monitorthe lanechange andkeepyour hands onthesteering wheel.Observethe traffic conditions andsteerand/or brake if necessary.
System limitationsThe system limitations ofActiveSteering AssistapplytoActive Lane Change Assist(page189).
The system may also be impaired or may notfunction inthefollowing situations:
RThe sensors intherear bumper are dirty,damaged or covered,for instanceby asticker or ice and snow.
RTheexterior lighting is malfunctioning.
19 2Driving and parking

NOTEDamagefrom automatic braking
If one ofthefollowing functions is switchedon,thevehicle brakes automatically in cer‐tain situations:
RActive Brake Assist
RActive Distance AssistDISTRONIC
RHOLD function
RActiveParking Assist
Toavoid damagetothevehicle, deactivatethese systems inthefollowing or similar sit‐uations:
Duringtowing
In a carwash
Requirements:RThevehicle isstationary.
RThe driver's door is closed orthe seat belt onthe driver's side isfastened.
RThe engine isrunning or has been automati‐cally switched offbythe ECOstart/stopfunction.
RThe electric parking brake isreleased.
RActive Distance AssistDISTRONIC is deacti‐vated.
RThe transmission is in position[,^or\\.
Activating the HOLD function
Depressthe brake pedal and after a shorttimequickly depress further untilthe

Where necessary,selectthe parking direc‐tion:forwards orreverse.Vehicle path3is shown, depending onselected parking space4andthe parkingdirection.
Confirm selected parking space4.
The turn signal indicator is switched on auto‐matically whenthe parking procedurebegins. The turn signal indicator is switchedoff automatically whenyou switchto[.
You areresponsiblefor selectingthe turn signalin accordance withthe traffic conditions. If nec‐essary,selectthe turn signal accordingly.
\nWARNINGRisk of accident duetovehi‐cle swinging out while parking or pullingout of a parking space
While parking orexiting a parking space,thevehicle swings out and can drive onto areasofthe oncoming lane.
This could causeyoutocollide withobjectsorotherroad users.
Pay attentiontoobjects andotherroadusers.
Where necessary,stopthevehicle orcancelthe parking procedure withActiveParking Assist.
If,forexample,thePlease Engage ReverseGearmessage appears inthe multimedia sys‐tem display: selectthe corresponding trans‐mission position.Vehicles with automatic transmission:Thevehicle drives intothe selected parkingspace.
On completion ofthe parking procedure,theParking Assist Finished, Take Control of Vehicledisplay message appears.Further maneuveringmaystill be necessary.
After completion ofthe parking procedure,safeguardthevehicle againstrollingaway.Whenrequiredbylegalrequirements or localconditions: turnthe wheelstowardsthe curb.
You canstopthevehicle andchangethetransmission position duringthe parking pro‐cedure. The systemthen calculates a new
vehicle path. The parking procedure canthen be continued. If no newvehicle path isavailable,the transmission position will bechanged again. Ifthevehicle has notyetreachedthe parking space,the parking pro‐cedure will be canceled, should agear bechanged.
Exiting a parking space withActiveParkingAssist
Requirements:RThevehicle has been parked withActiveParking Assist.
Please notethatyou areresponsibleforthevehi‐cle and surroundings duringthe entire parkingprocedure.
Startthevehicle.
212Driving and parking

Changing a media source
Pressthe left-handTouch Control.
Toselect a media source:swipe upwardsor downwards onthe left-handTouch Con‐trol.
Pressthe left-handTouch Control.
Dialingtelephone numbers usingthe on-board computer
\nWARNINGRisk of distraction from infor‐mation systems and communicationsequipment
Ifyou operate information and communica‐tion equipment integrated inthevehiclewhen driving,you will be distracted fromthetraffic situation. This could also causeyoutolose control ofthevehicle.
Only operatethis equipment whenthetraffic situation permits.
Ifyou cannot be sure ofthis,stopthevehicle whilst paying attentiontoroad
and traffic conditions and operatetheequipment withthevehiclestationary.
Whentelephoning,you must observethe legalrequirementsforthe countryin whichyou arecurrently driving.
Requirements:RThe mobile phone is connectedtothe multi‐media system.
On-board computer:
Phone
Vehicles withthe COMAND multimedia sys‐tem:The mostrecenttelephone calls (dialed,received and missed calls) are displayed onthePhonemenu.
Toselect an entry:swipe upwards or down‐wards onthe left-handTouch Control.
Pressthe left-handTouch Control.Ifthere is only onetelephone numbersavedtoan entry:thetelephone numberwill be selected.
Ifthere are multipletelephone numberssavedtoan entry:swipe upwards or down‐
wards onthe left-handtouch controltoselectthe desiredtelephone number.
Pressthe left-handTouch Control.Thetelephone number will be dialed.
Thefollowing displaysmay appear instead ofthetelephone numbers dialed:
RPlease Wait...:the application isstarting. If a
Bluetooth®connectiontothe mobile phoneis not established,the menufor authorizingand connecting a mobile phone will be dis‐played onthe multimedia system(page 304).
RUpdating data...:the call list is being upda‐ted.
RImporting Contacts...: contacts are beingimported fromthe mobile phone or astoragemedium.
Accepting/rejecting a callVehicles with Head-up Display:whenyoureceivea call,theIncoming Callmessage willappear onthe Head-up Display.
236Instrument Display and on-board computer

Notes on operating safety
\nWARNINGRisk of distraction from infor‐mation systems and communicationsequipment
Ifyou operate information and communica‐tion equipment integrated inthevehiclewhen driving,you will be distracted fromthetraffic situation. This could also causeyoutolose control ofthevehicle.
Only operatethis equipment whenthetraffic situation permits.
Ifyou cannot be sure ofthis,stopthevehicle whilst paying attentiontoroadand traffic conditions and operatetheequipment withthevehiclestationary.
\nWARNINGRisk of distraction from oper‐ating mobile communication equipmentwhilethevehicle is in motion
Ifyou operate mobile communication equip‐ment when driving,you will be distracted
fromthe traffic situation. This could alsocauseyoutolose control ofthevehicle.
Only operatethis equipment whenthevehicle isstationary.
Foryourown safety, alwaysobservethefollow‐ing points when operating mobile communica‐tions equipment and especiallyyourvoice con‐trol system:
RObservethe legalrequirementsforthe coun‐try in whichyou are driving.
RWhile driving, only operate mobile communi‐cations equipment andyourvoice controlsystem whenthe traffic conditions permit it.You mayotherwise be distracted fromthetraffic conditions and cause an accident,injuringyourself andothers.
RIfyou usethevoice control system in anemergencyyourvoice canchange andyourtelephone call, e.g. an emergency call, canthereby be unnecessarily delayed.
RFamiliarizeyourself withthevoice controlsystem functions beforestartingthe journey.
Operation
Overview of operation oftheVoice ControlSystem onthe multifunctionsteering wheel
TheVoice Control System is operational approx‐imatelythirty seconds afterthe ignition isswitched on.
Voice Control System239

traffic situation. This could also causeyoutolose control ofthevehicle.
Only operatethis equipment whenthetraffic situation permits.
Ifyou cannot be sure ofthis,stopthevehicle whilst paying attentiontoroadand traffic conditions and operatetheequipment withthevehiclestationary.
You must observethe legalrequirementsforthecountry in whichyou are currently driving whenoperatingthe multimedia system.
Usethecharacter input function inthefollowingsituations,forexample:
RRenaming afavorite
REntering a POI or address
RMaking a phone call
Thefollowing functions areavailable:
RSelecting acharacter inthecharacter bar
RWriting acharacter onthetouchpad
Character input can bestarted with a controlelement andresumed with another.
OntheTouch Control and controller:selectthecharacters inthecharacter bar.
Depending onthetargetentry,thefollowingcharacters areavailable:
RThe full set ofcharacters is shown
ROnlythosecharacters which are usefulforthe current inputstring are shown
Othercharacters are grayed out.Onthetouchpad:selectthecharacters inthecharacter bar.
or
Writethecharacters onthetouch-sensitivesurface ofthetouchpad.Handwritingrecognition supportsyoubymeans ofcharacter suggestions and aread-aloud function.
Examples ofcharacter entry:
RRenaming afavorite
REntering a POI or an address using free orstep-by-step search
REntering aweb address
Enteringcharacters usingthe controller
Example:renamingfavorites
Call upthe "Renamingfavorites" function(page 259).
Toenter acharacter:turn, slideand pressthe controller.Thecharacter is entered inthe input line.
Usethefollowing entryfunctions:
%Todeleteacharacter: pressthe control‐ler.
Todeletean entry: press and holdthecontroller untilthe entire entryis deleted.
262Multimedia system