2019 MAZDA MODEL CX-3 change key battery

NOTE
•Lumbar support adjustment cannot be
programmed.
•A driving position can be programmed
to the buttons on the side of the seat and
the key in use for driving the vehicle.
•If the vehicle has been serviced and the
battery cables disconnected, the
programmed seat positions will have
been erased. Re-program the seat
positions.
Programming
1. Make sure the parking brake is on.
2. Make sure the selector lever is in the P position.
3. Start the engine.
4. Adjust the seat and the active driving display to the desired driving position.
5. Press the SET button on the seat until a beep sound is heard 1 time.
6. Perform 1 of the following settings within 5 seconds of completing step 5
above:
•Programming using a button on
the side of the seat
Press the butt on you want to
program, either bu tton 1 or 2, until a
beep sound is heard 1 time.
•Programming using the key
Press the key
button until a beep
sound is heard 1 time.
NOTE
If a beep sound is heard 3 times, the
operation is canceled.
To move the driving position to a
programmed position
(Using a button on t he side of the seat)
1. Make sure the parking brake is on.
2. Make sure the selector lever is in the P position.
3. Start the engine.
4. Press the programming button for the
driving position you want to call up
(button 1 or 2).
5. A beep sound is heard when the driving position adjustment is
completed.
NOTE
•If the driving position movement is not
changed, only the beep sounds.
•A seat position can be called up even
with the engine not running.
•The driving position adjustment is
canceled in the following cases:
•Any of the seat adjustment switches is
operated.
•The SET button is pressed.
•Programming button 1 or 2 is pressed.
•The key button or button is
operated.
•The vehicle starts moving.
•The active driving display is adjusted.
(Using a programmed key)
1. Unlock the doors by pressing a request switch or the key
button.
2. After unlocking the doors, the seat
position adjustment begins within 40
seconds of opening the driver's door,
and a beep sounds when the operation
is finished.
3. Make sure the parking brake is on.
Essential Safety Equipment
Seats
2-8
CX-3_8GR7-EA-18B_Edition1 2017-12-20 16:18:14

CAUTION
Radio equipment like this is governed by
laws in the United States.
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user's authority
to operate the equipment.
NOTE
•The keyless entry system operation may
vary due to local conditions.
•The keyless entry system is fully
operational (door/liftgate lock/unlock)
when the ignition is switched off. The
system does not operate if the ignition is
switched to any position other than off.
•If the key does not operate when
pressing a button or the operational
range becomes too small, the battery
may be weak. To install a new battery,
refer to Key Battery Replacement (page
6-34).
•Battery life is about 1 year. Replace the
battery with a new one if the KEY
indicator light (green) flashes in the
instrument cluster. Replacing the battery
about once a year is recommended
because the KEY warning light/
indicator light may not illuminate or
flash depending on the rate of battery
depletion.
•Additional keys can be obtained at an
Authorized Mazda Dealer. Up to 6 keys
can be used with the keyless functions
per vehicle. Bring all keys to an
Authorized Mazda Dealer when
additional keys are required.
▼Tr a n s m i t t e r
Operation buttons
Operation indicator light
NOTE
•The headlights turn on/off by operating
the transmitter. Refer to Leaving Home
Light on page 4-47.
•(With theft-deterrent system)
The hazard warning lights flash when
the theft-deterrent system is armed or
turned off.
Refer to Theft-Deterrent System on page
3-41.
•(With the advanced keyless function)
A beep sound can be heard for
confirmation when the doors and the
liftgate are locked/unlocked using the
key. If you prefer, the beep sound can be
turned off.
The volume of the beep sound can also
be changed.
Refer to Personalization Features on
page 9-9.
Use the following procedure to change the
setting.
1. Switch the ignition off and close all of the doors and the liftgate.
Before Driving
Keys
3-4
CX-3_8GR7-EA-18B_Edition1 2017-12-20 16:18:14

Index
i-ACTIV AWD Operation.................4-75
J
Jack...................................................... 7-5
Jump-Starting.................................... 7-18
K
Keyless Entry System......................... 3-3
Keys.....................................................3-2Key suspend function.................... 3-8
Transmitter..................................... 3-4
Key left-in-luggage compartment
warning beep (With the advanced keyless
function)............................................ 7-45
Key left-in-vehicle warning beep (With
the advanced keyless function)......... 7-45
Key removed from vehicle warning
beep................................................... 7-44
Key Suspend Function........................ 3-8
L
Label Information............................... 9-2
Lane Departure Warning sound........ 7-46
Lane Departure Warning System
(LDWS)............................................. 4-84 LDWS switch.............................. 4-87
Lane-Change Signals........................ 4-49
Leaving Home Light......................... 4-47
Liftgate.............................................. 3-20 Luggage compartment................. 3-22
When Liftgate Cannot be
Opened......................................... 7-48
Lighting Control................................4-43
Lights-on reminder............................7-43
Light Bulbs Replacement................................ 6-41
Specifications.................................9-6
Lubricant Quality................................ 9-4
Luggage Compartment Light.......... 5-126
M
Maintenance
Information.................................... 6-2
Scheduled.......................................6-4
Maintenance Monitor........................ 6-15
Manual Transaxle Operation............. 4-30
Map Lights...................................... 5-126
Mazda Radar Cruise Control with Stop &
Go function (MRCC with Stop & Go
function).......................................... 4-107 Close proximity warning........... 4-109
Cruise control function.............. 4-116
Display indication......................4-109
Setting the system......................4-110
Stop hold control....................... 4-115
Mazda Radar Cruise Control with Stop &
Go function (MRCC with Stop & Go
function) System Warnings............... 7-47
Message Indicated on Display.......... 7-41
Meters and Gauges............................4-11
Mirrors Outside mirrors............................ 3-31
Rearview mirror.......................... 3-32
Mirror Defogger.......... ...................... 4-54
Moonroof...........................................3-36
O
Odometer and Trip Meter................. 4-12
Outside Mirrors................................. 3-31
Outside Temperature Display............4-18
Overhead Console........................... 5-131
Overhead Lights......... ..................... 5-126
Overheating....................................... 7-22
Overloading....................................... 3-48
Owner Maintenance Closing the Hood.........................6-20
Engine Compartment
Overview..................................... 6-21
Key battery replacement..............6-34
10-6
CX-3_8GR7-EA-18B_Edition1 2017-12-20 16:18:14