2019 MAZDA MODEL CX-3 brake

[x] Cancel search: brake

Page 263 of 608

MAZDA MODEL CX-3 2019  Owners Manual (in English) Radar Sensor (Front)*
Your vehicle is equipped with a radar sensor (front).
The following systems also use the radar sensor (front).
•Distance Recognition Support System (DRSS)
•Mazda Radar Cruise

Page 265 of 608

MAZDA MODEL CX-3 2019  Owners Manual (in English) •If the vehicle is driven on a road with little traffic and few vehicles ahead or obstructions
for the radar sensor (front) to  detect, the sensor detects that the radar sensor (front) is
dirty and

Page 270 of 608

MAZDA MODEL CX-3 2019  Owners Manual (in English) ▼To Set Speed
1. Activate the cruise control system by
pressing the ON switch. The cruise
main indication (white) is displayed.
2. Accelerate to the desired speed, which
must be more than 25 km/h (1

Page 271 of 608

MAZDA MODEL CX-3 2019  Owners Manual (in English) ▼To Decrease Cruising Speed
Press the SET/ switch and hold it. The
vehicle will gradually slow.
Release the switch at the desired speed.
 
Press the SET/
 switch and release it
immediately to adjust

Page 303 of 608

MAZDA MODEL CX-3 2019  Owners Manual (in English) WA R N I N G
Do not allow the connection plug cord to
get tangled with the parking brake or the
shift lever (manual transaxle)/selector lever
(automatic transaxle):
Allowing the plug cord to become ta

Page 419 of 608

MAZDA MODEL CX-3 2019  Owners Manual (in English) 6Maintenance and Care
How to keep your Mazda in top condition.
Essential Information........................6-2 Introduction.................................. 6-2
Scheduled Maintenance................

Page 422 of 608

MAZDA MODEL CX-3 2019  Owners Manual (in English) Scheduled Maintenance (U.S.A., Canada, and Puerto
Rico)
Follow Schedule 1 if the vehicle is operated mainly where none  of the following conditions
(severe driving conditions)apply.
•Repeated short-

Page 423 of 608

MAZDA MODEL CX-3 2019  Owners Manual (in English) ▼Schedule 1
U.S.A. and Puerto Rico residents 
- Engine oil flexible maintenance interval
Use when the maintenance monitor for “Oil Change” is set to “Fl exible”. For details,
see maintenance