2019 MAZDA MODEL 2 light

&$87,21
In the following cases, turn the system off to prevent a mis-operation:
¾The vehicle is being towed or when towing another vehicle.
¾The vehicle is on a chassis roller.
¾When driving on rough roads such as in areas of dense grass or off-road.
Refer to Stopping the Advanced Smart City Brake Support (Advanced SCBS) System Operation
on page 4-166 on how to turn off the Advanced SCBS system.
NOTE
xThe Advanced SCBS system will operate under the following conditions.
xThe engine is running.
xThe Smart City Brake Support (SCBS) warning light(amber) does not illuminate.
x(Object is vehicle ahead)
The vehicle speed is between about 4 to 80 km/h (2 to 50 mph).
x(Object is a pedestrian)
The vehicle speed is between about 10 to 80 km/h (6.2 to 50 mph).
xThe Advanced SCBS system is not turned off.
xUnder the following conditions, the Advanced SCBS system may not operate normally:
xThe Advanced SCBS system will not operate if the driver is deliberately performing
driving operations (accelerator pedal and steering wheel).
xIf there is the possibility of partial contact with a vehicle ahead.
xThe vehicle is driven on a slippery road surface such as wet roads or icy or snow-bound
roads.
xThe braking performance is adversely affected due to cold temperatures or wet brakes.
xThe vehicle is driven at the same speed as the vehicle ahead.
xThe accelerator pedal is depressed.
xThe brake pedal is depressed.
xThe steering wheel is being operated.
xThe selector lever is being operated.
xIn the following cases, the Advanced SCBS may operate.
xObjects on the road at the entrance to a curve.
xVehicles passing in the opposite lane while making a curve.
xWhen passing through a toll gate.
xWhen passing through low gates, narrow gates, car washing machines, or tunnels.
xIf you suddenly come close to a vehicle ahead.
x2-wheeled vehicles, animals, or standing trees.
:KHQ'ULYLQJ
L$&7,96(16(


&$87,21
In the following cases, turn the system off to prevent a mis-operation:
¾The vehicle is being towed or when towing another vehicle.
¾The vehicle is on a chassis roller.
¾When driving on rough roads such as in areas of dense grass or off-road.
Refer to Stopping the Smart City Brake Support [Forward] (SCBS F) system Operation on page
4-170 on how to turn off the SCBS F system.
NOTE
xThe SCBS F system will operate under the following conditions.
xThe engine is running.
xThe Smart Brake Support/Smart City Brake Support (SBS/SCBS) system warning light
(amber) does not illuminate.
x(Rear-end collision warning)
The vehicle speed is about 4 to 80 km/h (2 to 50 mph).
x(Brake control (Smart City Brake Support (SCBS) brake))
The vehicle speed is about 4 to 30 km/h (2 to 18 mph).
xThe SCBS F system is not turned off.
xUnder the following conditions, the SCBS F system may not operate normally:
xThe SCBS F system will not operate if the driver is deliberately performing driving
operations (accelerator pedal and steering wheel).
xIf there is the possibility of partial contact with a vehicle ahead.
xThe vehicle is driven on a slippery road surface such as wet roads or icy or snow-bound
roads.
xThe braking performance is adversely affected due to cold temperatures or wet brakes.
xThe vehicle is driven at the same speed as the vehicle ahead.
xThe accelerator pedal is depressed.
xThe brake pedal is depressed.
xThe steering wheel is being operated.
xThe selector lever is being operated.
xIn the following cases, the Forward Sensing Camera (FSC) determines that there is a
vehicle ahead and the SCBS F may operate.
xObjects on the road at the entrance to a curve.
xVehicles passing in the opposite lane while making a curve.
xMetal objects, bumps, or protruding objects on the road.
xWhen passing through a toll gate.
xWhen passing through low gates, narrow gates, car washing machines, or tunnels.
:KHQ'ULYLQJ
L$&7,96(16(


¾If ice or snow is stuck on the ultrasonic sensors (rear) they may not be able to detect
obstructions correctly depending on the conditions. In such cases, the system may not be
able to perform controls correctly. Always drive carefully and pay attention to the rear of
the vehicle.
NOTE
xThe vehicle posture changes depending on the accelerator pedal, brake pedal and
steering wheel operations, which could make it difficult for the system to recognise an
obstruction, or it could facilitate unnecessary detection. In such cases, the SCBS R may or
may not operate.
xThe SCBS R system will operate under the following conditions.
xThe Smart City Brake Support (SCBS) warning light (amber) does not illuminate.
xThe engine is running.
xThe change lever (manual transaxle vehicle) or the selector lever (automatic transaxle
vehicle) is in the R (reverse) position.
xThe vehicle speed is between about 2 to 8 km/h (2 to 4 mph).
xThe SCBS R is not turned off.
xThe DSC is not malfunctioning.
xThe SCBS R operates using ultrasonic sensors (rear) which detect obstructions at the rear
by emitting ultrasonic waves and then receiving the returning waves reflected off the
obstructions.
xIn the following cases, the ultrasonic sensors (rear) cannot detect obstructions and the
SCBS R may not operate.
xThe height of the obstruction is low such as low walls or trucks with low loading
platforms.
xThe height of the obstruction is high such as trucks with high loading platforms.
xThe obstruction is small.
xThe obstruction is thin such as a signpost.
xThe obstruction is positioned away from the centre of the vehicle.
xThe surface of the obstruction is not pointed vertically relative to the vehicle.
xThe obstruction is soft such as a hanging curtain or snow stuck to a vehicle.
xThe obstruction is shaped irregularly.
xThe obstruction is extremely close.
:KHQ'ULYLQJ
L$&7,96(16(


xIn the following cases, the ultrasonic sensors (rear) cannot detect obstructions correctly
and the SCBS R may not operate.
xSomething is stuck on the bumper near an ultrasonic sensor (rear).
xThe steering wheel is turned sharply, or the brake or accelerator pedal is operated.
xThere is another obstruction near one obstruction.
xDuring inclement weather such as rain, fog and snow.
xHigh or low humidity.
xHigh or low temperatures
xStrong winds.
xThe path of travel is not flat.
xHeavy luggage is loaded in the luggage compartment or on the rear seat.
xObjects such as a wireless aerial, fog light, or illuminated number plate is installed
near an ultrasonic sensor (rear).
xThe orientation of an ultrasonic sensor (rear) has deviated for reasons such as a
collision.
xThe vehicle is affected by other sound waves such as the horn, engine noise, ultrasonic
sensor of another vehicle.
xIn the following cases, an ultrasonic sensor (rear) may detect something as a target
obstruction which could cause the SCBS R system to operate.
xDriving on a steep slope.
xWheel blocks.
xHanging curtains, gate poles such as at toll gates and railroad crossing.
xWhen travelling near objects such as foliage, barriers, vehicles, walls, and fences along
a road.
xWhen driving off-road in areas where there is grass and forage.
xWhen passing through low gates, narrow gates, car washing machines, and tunnels.
xA towing bar is installed or a trailer is connected.
x(Manual transaxle)
If the vehicle is stopped by the Smart City Brake Support (SCBS) operation and the clutch
pedal is not depressed, the engine stops.
xThe Smart City Brake Support (SCBS) warning indication (amber) turns on when the
system has a malfunction.
Refer to Warning Lights on page 4-39.
:KHQ'ULYLQJ
L$&7,96(16(


6PDUW%UDNH6XSSRUW
6%6

7KH6%6V\VWHPDOHUWVWKHGULYHURID
SRVVLEOHFROOLVLRQXVLQJDGLVSOD\DQG
ZDUQLQJVRXQGLIWKHUDGDUVHQVRUIURQW
DQGWKH)RUZDUG6HQVLQJ&DPHUD)6&
GHWHUPLQHWKDWWKHUHLVWKHSRVVLELOLW\RID
FROOLVLRQZLWKDYHKLFOHDKHDGZKLOHWKH
YHKLFOHLVEHLQJGULYHQDWDERXWNPKRU
IDVWHUPSKRUIDVWHU)XUWKHUPRUHLI
WKHUDGDUVHQVRUIURQWDQGWKH)RUZDUG
6HQVLQJ&DPHUD)6&GHWHUPLQHVWKDWD
FROOLVLRQLVXQDYRLGDEOHWKHDXWRPDWLF
EUDNHFRQWUROLVSHUIRUPHGWRUHGXFH
GDPDJHLQWKHHYHQWRIDFROOLVLRQ
,QDGGLWLRQZKHQWKHGULYHUGHSUHVVHVWKH
EUDNHSHGDOWKHEUDNHVDUHDSSOLHGILUPO\
DQGTXLFNO\WRDVVLVW%UDNH$VVLVW6%6
EUDNHDVVLVW
:$ 5 1 , 1 *
Do not rely completely on the SBS system
and always drive carefully:
The SBS is designed to reduce damage in
the event of a collision, not avoid an
accident. The ability to detect an
obstruction is limited depending on the
obstruction, weather conditions, or traffic
conditions. Therefore, if the accelerator
pedal or brake pedal is mistakenly
operated it could result in an accident.
Always verify the safety of the surrounding
area and depress the brake pedal or
accelerator pedal while keeping a safer
distance from vehicles ahead or on-coming
vehicles.
&$87,21
In the following cases, turn the system off
to prevent a mis-operation:
¾The vehicle is being towed or when
towing another vehicle.
¾The vehicle is on a chassis roller.
¾When driving on rough roads such as in
areas of dense grass or off-road.
NOTE
xThe SBS system operates when all of the
following conditions are met:
xThe ignition is switched ON.
xThe SBS system is on.
xThe vehicle speed is about 15 km/h or
faster (10 mph or faster).
xThe relative speed between your
vehicle and the vehicle ahead is about
15 km/h or faster (10 mph or faster).
xThe Dynamic Stability Control (DSC)
is not operating.
xThe SBS system may not operate under
the following conditions:
xIf the vehicle is accelerated rapidly
and it comes close to a vehicle ahead.
xThe vehicle is driven at the same
speed as the vehicle ahead.
xThe accelerator pedal is depressed.
xThe brake pedal is depressed.
xThe steering wheel is being operated.
xThe selector lever is being operated.
xThe direction indicator is being used.
xWhen the vehicle ahead is not
equipped with tail lights or the tail
lights are turned off.
:KHQ'ULYLQJ
L$&7,96(16(

6RPHPRGHOV

xThe 360°View Monitor has limitations. Objects under the bumper or near both ends of the
bumper cannot be displayed.
xObstructions above the upper image range of the camera are not displayed.
xUnder the following conditions, the screen might be difficult to view, however this does
not indicate a problem.
xThe temperature near the lens is high/low.
xRainy conditions, water droplets on the camera, or high humidity.
xMud or foreign matter near the camera.
xExtremely bright light such as sunlight or headlights hitting the camera lens directly.
xBecause the 360°View Monitor camera uses a special lens, the distance displayed on the
screen differs from the actual distance.
xObstructions displayed on the screen may appear differently than in actuality.
(Obstructions may appear fallen, larger, or longer than they actually are.)
xDo not apply stickers to a camera or the area around it. In addition, do not install
accessories or an illuminated number/character number plate to the area around a
camera. Otherwise, the camera may not correctly display the surrounding conditions.
:KHQ'ULYLQJ
L$&7,96(16(


:$ 5 1 , 1 *
Do not modify the suspension:
If the vehicle height or inclination is changed, the system will not be able to correctly detect
vehicles ahead. This will result in the system not operating normally or mistakenly operating,
which could cause a serious accident.
&$87,21
¾Do not apply accessories, stickers or film to the windscreen near the Forward Sensing
Camera (FSC).
If the area in front of the Forward Sensing Camera (FSC) lens is obstructed, it will cause the
system to not operate correctly. Consequently, each system may not operate normally
which could lead to an unexpected accident.
¾Do not disassemble or modify the Forward Sensing Camera (FSC).
Disassembly or modification of the Forward Sensing Camera (FSC) will cause a malfunction
or mistaken operation. Consequently, each system may not operate normally which could
lead to an unexpected accident.
¾Heed the following cautions to assure the correct operation of the Forward Sensing Camera
(FSC).
¾Be careful not to scratch the Forward Sensing Camera (FSC) lens or allow it to get dirty.
¾Do not remove the Forward Sensing Camera (FSC) cover.
¾Do not place objects on the instrument panel which reflect light.
¾Always keep the windscreen glass around the camera clean by removing dirt or fogging.
Use the windscreen defroster to remove fogging on the windscreen.
¾Consult an expert repairer (we recommend an Authorised Mazda Repairer) regarding
cleaning the interior side of the windscreen around the Forward Sensing Camera (FSC).
¾Consult an expert repairer (we recommend an Authorised Mazda Repairer) before
performing repairs around the Forward Sensing Camera (FSC).
¾The Forward Sensing Camera (FSC) is installed to the windscreen. Consult an expert
repairer (we recommend an Authorised Mazda Repairer) for windscreen repair and
replacement.
¾When cleaning the windscreen, do not allow glass cleaners or similar cleaning fluids to
get on the Forward Sensing Camera (FSC) lens. In addition, do not touch the Forward
Sensing Camera (FSC) lens.
¾When performing repairs around the rearview mirror, consult an expert repairer (we
recommend an Authorised Mazda Repairer).
¾Consult an expert repairer (we recommend an Authorised Mazda Repairer) regarding
cleaning of the camera lens.
:KHQ'ULYLQJ
L$&7,96(16(


¾Do not hit or apply strong force to the Forward Sensing Camera (FSC) or the area around
it. If the Forward Sensing Camera (FSC) is severely hit or if there are cracks or damage
caused by
flying gravel or debris in the area around it, stop using the following systems
and consult an expert repairer (we recommend an Authorised Mazda Repairer).
¾High Beam Control System (HBC)
¾Adaptive LED Headlights (ALH)
¾Lane Departure Warning System (LDWS)
¾Driver Attention Alert (DAA)
¾Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS)
¾Traffic Sign Recognition System (TSR)
¾Advanced Smart City Brake Support (Advanced SCBS)
¾Smart City Brake Support [Forward] (SCBS F)
¾Smart Brake Support (SBS)
¾The direction in which the Forward Sensing Camera (FSC) is pointed has been finely
adjusted. Do not change the installation position of the Forward Sensing Camera (FSC) or
remove it. Otherwise, it could result in damage or malfunction.
¾Always use tyres for all wheels that are of the
specified size, and the same manufacturer,
brand, and tread pattern. In addition, do not use tyres with significantly different wear
patterns on the same vehicle as the system may not operate normally.
¾The Forward Sensing Camera (FSC) includes a function for detecting a soiled windscreen
and informing the driver, however, depending on the conditions, it may not detect plastic
shopping bags, ice or snow on the windscreen. In such cases, the system cannot accurately
determine a vehicle ahead and may not be able to operate normally. Always drive carefully
and pay attention to the road ahead.
NOTE
xIn the following cases, the Forward Sensing Camera (FSC) cannot detect target objects
correctly, and each system may be unable to operate normally.
xThe height of the vehicle ahead is low.
xYou drive your vehicle at the same speed as the vehicle ahead.
xHeadlights are not turned on during the night or when going through a tunnel.
xIn the following cases, the Forward Sensing Camera (FSC) may not be able to detect
target objects correctly.
xUnder bad weather condition, such as rain, fog and snow.
xThe window washer is being used or the windscreen wipers are not used when it's
raining.
xIce, fog, snow, frost, rainfall, dirt, or foreign matter such as a plastic bag is stuck on the
windscreen.
xTrucks with low loading platforms and vehicles with an extremely low or high profile.
:KHQ'ULYLQJ
L$&7,96(16(