2019 Lexus LC500 horn

1273-4. Adjusting the steering wheel and mirrors
3
Before driving
3-4.Adjusting the steering wheel and mirrors
Operating the switch moves the steer-
ing wheel in the following directions:
1Up
2 Down
3 Toward the driver
4 Away from the driver
■The steering wheel can be adjusted
when
The engine switch is in
ACCESSORY or IGNITION ON mode
.
■Automatic adjustment of the steering
position
A desired steering position can be entered
to memory and recalled automatically by
the driving position memory system.
(  P.122)
■Enabling easier driver entry and exit
(auto tilt away)
When the engine switch is
turned off, the steering wheel returns to its
stowed position by moving up and away.
Turning the engine switch to
ACCESSORY or IGNITION ON mode
will return the steering wheel
to the original position.
■Customization
The auto tilt away function can be changed.
(Customizable features: P.391)
Press on or close to the mark.
Steering wheel
Adjustment procedure
WARNING
■Caution while driving
Do not adjust the steering wheel while
driving.
Doing so may cause the driver to mis-
handle the vehicle and cause an acci-
dent, resulting in death or serious injury.
Sounding the horn

2164-5. Using the driving support systems
• When the engine switch is turned off once and turned to IGNI-
TION ON mode again
■If “Clean Parking Assist Sensor” is dis-
played on the multi-information display
A sensor may be dirty or covered with snow
or ice. In such cases, if it is removed from
the sensor, the system should return to nor-
mal.
Also, due to the sensor being frozen at low
temperatures, a malfunction display may
appear or an obstacle may not be detected.
If the sensor thaws out, the system should
return to normal.
■If “Parking Assist Malfunction” or “Park-
ing Assist Malfunction Visit Your
Dealer” is displayed on the multi-infor-
mation display
There is a malfunction and the device may
not be working properly.
Have the vehicle inspected by your Lexus
dealer.
■Sensor detectio n information
●The sensor’s detection areas are limited
to the areas around the vehicle’s front and
rear bumpers.
●Certain vehicle conditions and the sur-
rounding environment may affect the
ability of the sensor to correctly detect
obstacles. Particular instances where this
may occur are listed below.
• There is dirt, snow or ice on the sensor. (Wiping the sensors will resolve this
problem.)
• The sensor is frozen. (Thawing the area will resolve this problem.)
In especially cold weather, if a sensor is
frozen the screen may show an abnormal
display, or obstacles may not be
detected.
• The sensor is covered in any way.
• The vehicle is leaning considerably to one side.
• On an extremely bumpy road, on an incline, on gravel, or on grass.
• The vicinity of the vehicle is noisy due to
vehicle horns, motorcycle engines, air
brakes of large vehicles, or other loud
noises producing ultrasonic waves.
• There is another vehicle equipped with parking assist sensor in the vicinity.
• The sensor is coated with a sheet of spray or heavy rain.
• The vehicle is equipped with a fender pole or wireless antenna.
• Towing eyelets are installed.
• The bumper or sensor receives a strong
impact.
• The vehicle is approaching a tall or
curved curb.
• In harsh sunlight or intense cold weather.
• The area directly under the bumpers is not detected.
• If obstacles draw too close to the sensor.
• A non-genuine Lexus suspension (low-
ered suspension etc.) is installed.
• People may not be detected if they are wearing certain types of clothing.
In addition to the examples above, there are
instances in which, be cause of their shape,
signs and other objects may be judged by
the sensor to be closer than they are.
●The shape of the obstacle may prevent
the sensor from detecting it. Pay particu-
lar attention to the following obstacles:
• Wires, fences, ropes, etc.
• Cotton, snow and other materials that
absorb sound waves
• Sharply-angled objects
• Low obstacles
• Tall obstacles with upper sections pro- jecting outwards in the direction of your
vehicle
●The following situations may occur
during use.
• Depending on the shape of the obstacle and other factors, the detection distance
may shorten, or detection may be impos-
sible.
• Obstacles may not be detected if they
are too close to the sensor.
• There will be a short delay between obstacle detection and display. Even at
slow speeds, there is a possibility that the
obstacle will come within the sensor’s
detection areas befo re the display is
shown and the warning beep sounds.
• Thin posts or object s lower than the sen-
sor may not be detected when
approached, even if they have been
detected once.
• It might be difficult to hear beeps due to

3517-2. Steps to take in an emergency
7
When trouble arises
One of the following may be the cause
of the problem:
The electronic key may not be func-
tioning properly. ( P.356)
 There may not be sufficient fuel in
the vehicle’s tank.
Refuel the vehicle. ( P.182)
 The engine may be flooded.
Try to restart the engine again fol-
lowing correct starting procedures.
( P.146)
 There may be a malfunction in the
engine immobilizer system.
( P.69)
 There may be a malfunction in the
shift control system.
* ( P.149)
 There may be a malfunction in the
steering lock system.
*: It may not be possible to shift the shift
position other than P.
One of the following may be the cause
of the problem:
 The 12-volt battery may be dis-
charged. ( P.357)
 The 12-volt battery terminal con-
nections may be lo ose or corroded.
( P.301)
The engine starting system may be
malfunctioning due to an electrical
problem such as electronic key battery
depletion or a blown fuse. However, an
interim measure is available to start the
engine.
One of the following may be the cause
of the problem:
 One or both of the 12-volt battery
terminals may be disconnected.
( P.301)
 The 12-volt battery may be dis-
charged. ( P.357)
 There may be a malfunction in the
steering lock system.
If the engine will not start
(LC500)
If the engine will not start even
though correct starting procedures
are being followed ( P.146), con-
sider each of the following points:
The engine will not start even
though the starter motor oper-
ates normally.
The starter motor turns over
slowly, the interior lights and
headlights are dim, or the horn
does not sound or sounds at a low
volume.
The starter motor does not turn
over
The starter motor does not turn
over, the interior lights and head-
lights do not turn on, or the horn
does not sound.

3537-2. Steps to take in an emergency
7
When trouble arises
One of the following may be the cause
of the problem:
The 12-volt battery may be dis-
charged. ( P.357)
 The 12-volt battery terminal con-
nections may be loose or corroded.
( P.301)
One of the following may be the cause
of the problem:
 The 12-volt battery may be dis-
charged. ( P.357)
 One or both of the 12-volt battery
terminals may be disconnected.
( P.301)
Contact your Lexus dealer if the problem
cannot be repaired, or if repair procedures
are unknown.
When the hybrid system does not start,
the following steps can be used as an
interim measure to start the hybrid sys-
tem if the power switch is functioning
normally.
Do not use this starting procedure
except in cases of emergency. 1
Press the parking brake switch to
check that the parking brake is set.
(P.168)
Parking brake indicator will come on.
2 Turn the power switch to ACCES-
SORY mode.
3 Press and hold the power switch for
about 15 seconds while depressing
the brake pedal firmly.
Even if the hybrid system can be
started using the above steps, the sys-
tem may be malfunctioning. Have the
vehicle inspected by your Lexus dealer.
The interior lights and head-
lights are dim, or the horn does
not sound or sounds at a low vol-
ume.
The interior lights and head-
lights do not turn on, or the horn
does not sound.
Starting the hybrid system in an
emergency

419What to do if... (Troubleshooting)
It is locked automatically to prevent
theft of the vehicle. ( P.147, 150)
 Is the window lock switch pressed?
The power window at the passenger’s seat
cannot be operated if the window lock
switch is pressed. ( P.133)
 The auto power off function will be
operated if the vehicle is left in
ACCESSORY or IGNITION ON
mode (the engine is
not running operating>) for a period of time.
( P.149, 152)
 The seat belt reminder light is flash-
ing
Are the driver and the passengers wearing
the seat belts? ( P.339)
 The parking brake indicator is on
Is the parking brake released? ( P.168)
Depending on the situation, other
types of warning buzzer may also
sound. ( P.335, 344)
 Did anyone inside the vehicle open a door during setting the alarm?
The sensor detects it and the alarm sounds.
(
 P.71)
To stop the alarm, turn the engine
switch to IGNITION
ON mode , or start the
engine .
 Is the electronic key left inside the
vehicle?
Check the message on the multi-informa-
tion display. ( P.344)
 When a warning light turns on or a
warning message is displayed, refer
to P.335, 344.
 Slow down the vehicle, drive with
extra caution, and take your vehicle
to the nearest Lexus dealer or
authorized tire dealer as soon as
possible to have the tire replaced.
( P.350)
 Try the procedure for when the vehi-
cle becomes stuck in mud, dirt, or
snow. ( P.370)
The windows do not open or
close by operating the power
window switches
The engine switch switch> is turned off automati-
cally
A warning buzzer sounds during
driving
An alarm is activated and the
horn sounds
A warning buzzer sounds when
leaving the vehicle
A warning light turns on or a
warning message is displayed
When a problem has occurred
If you have a flat tire
The vehicle becomes stuck

424Alphabetical index
Refueling ..........................................................182
Fuel gauge ......................................................... 80
Fuel pump shut off system........................ 334
Fuses ...................................................................319
G
Garage door opener ................................. 266
Gauges ............................................................... 80
Glove box ....................................................... 260
Glove box light ............................................. 260
Grocery bag hooks .................................... 262
H
Headlights ........................................................ 173 Automatic High Beam system.............. 176
Light switch ..................................................... 173
Replacing light bulbs................................ 324
Headlights aim .............................................. 323
Head restraints ...............................................125
Head-up display.............................................. 90
Heated steering wheel .. ............................ 255
Heaters Air conditioning system.......................... 248
Heated steering wheel............................ 255
Outside rear view mirrors .................... 249
Seat heaters .................................................. 255
High-voltage components ......................... 64
Hill-start assist control ............................... 232
Hood ................................................................. 290 Open ...............................................................290
Pop Up Hood ................................................ 36
Hooks Cargo hooks................................................ 262
Coat hooks ................................................... 265
Grocery bag hooks ................................. 262
Retaining hooks (floor mat)......................22
Horn .................................................................... 127
Hybrid battery (traction battery) Location............................................................. 64
Specification ................................................. 374
Warning message........................................ 67 Hybrid battery (traction battery) air vents
..............................................................................67
Hybrid system .................................................... 61 Emergency shut off system...................... 67
Energy monitor/consumption screen95
EV drive mode............................................. 153
High voltage components ....................... 64
Hybrid System Indicator ........................... 94
Hybrid system precautions...................... 64
Hybrid vehicle driving tips ....................236
If the hybrid system will not start ........352
Overheating ................................................. 367
Power (ignition) switch ............................ 149
Regenerative braking ................................. 62
Starting the hybrid system ...................... 149
Vehicle proximity noti fication system. 63
Hybrid System Indicator.............................. 94
Hybrid transmission....................................... 161 M mode ........................................................... 166
Paddle shift switches .......................165, 166
Snow mode.................................................... 165
I
I/M test ............................................................ 287
IdentificationEngine.............................................................. 372
Vehicle ............................................................ 372
Ignition switch (engine switch).................146 Auto power off function........................... 149
Changing the engine switch modes . 148
If your vehicle has to be stopped in an emergency .................................................326
Starting the engine ..................................... 146
Ignition switch (power switch) .................149
Auto power off function........................... 152
Changing the power switch modes . 152
If your vehicle has to be stopped in an emergency .................................................326
Starting the hybrid system ...................... 149
Illuminated entry system ........................... 258
Immobilizer system........................................ 69
Indicators ............................................................76