2019 Lexus GX460 high beam

3
1
8 7
6
5
4
3
2
GX460_OM_OM60Q84U_(U)
9
4-1. Before driving Driving the vehicle ......................162
Cargo and luggage ....................169
Vehicle load limits ....................... 173
Trailer towing (with towing hitch) .................... 174
Dinghy towing ...............................192
4-2. Driving procedures Engine (ign ition) switch .............193
Automatic transmission ........... 198
Turn signal lever ......................... 204
Parking brake .............................. 205
4-3. Operating the lights and wipers
Headlight switch ........................ 206
Automatic High Beam.............. 210
Fog light switch .............................215
Windshield wipers and washer ........................................... 217
Rear window wiper and washer ......................................... 222
Headlight cleaner switch........ 224
4-4. Refueling Opening the fuel tank cap ..... 225 4-5. Using the driving support
systems
Cruise control ............................. 229
Dynamic radar cruise control ......................................... 232
LDA (Lane Departure Alert) ........ 243
Intuitive parking assist.............. 249
Rear view monitor system...... 258
Lexus parking assist monitor........................................ 268
Wide view front & side monitor........................................ 294
Multi-terrain Se lect.....................312
Multi-terrain Monitor................. 317
Rear height control air suspension ...................................341
AVS (Adaptive Variable Suspension System) .............. 345
Four-wheel drive system ........ 346
Crawl Control............................. 350
Downhill assist control system.......................................... 353
Driving assist systems .............. 355
BSM (Blind Spot Monitor).......361
• The Blind Spot Monitor function .................................... 366
• The Rear Cross Traffic Alert function......................... 369
PCS (Pre-Collision system).......... 372
4-6. Driving tips Winter driving tips...................... 381
Off-road precau tions............... 384
4Driving

84
GX460_OM_OM60Q84U_(U)2. Instrument cluster
*1: These lights turn on when the engine switch is turned to IGNITION ON mode to
indicate that a system check is being perfor med. They will turn off after the engine is
on, or after a few seconds. There may be a ma lfunction in a system if the lights do not
turn on, or turn off. Have the vehi cle inspected by your Lexus dealer.
*2: The light flashes to indicate a malfunction.
The indicators inform the driver of the op erating state of the vehicle’s various sys-
tems.
Indicators
Turn signal indicator
(  P. 204) “SET” indicator
(
 P. 229, 232)
(U.S.A.)
Headlight indicator
( P. 206)
(if equipped)
Dynamic radar cruise
control indicator
( P. 232)
(Canada)
Tail light indicator
( P. 206)
(if equipped)
“LDA” (Lane Departure
Alert) indicator ( P. 243)
Headlight high beam
indicator ( P. 207)
*1, 2
Slip indicator ( P. 356)
(if equipped)
Automatic High Beam
indicator ( P. 210)*1VSC OFF indicator
( P. 357)
(if equipped)
Fog light indicator
( P. 215)
(if equipped)
Multi-terrain Select
indicator ( P. 312)
*1
Eco Driving Indicator
Light ( P. 94)
*1
(if equipped)
Crawl Control indicator
( P. 350)
Cruise control indicator
(  P. 229, 232)
*1
(if equipped)
Downhill assist control
system indicator
( P. 353)

161
GX460_OM_OM60Q84U_(U)
4Driving
4-1. Before drivingDriving the vehicle ...................... 162
Cargo and luggage .................... 169
Vehicle load limits ....................... 173
Trailer towing (with towing hitch) ................... 174
Dinghy towing .............................. 192
4-2. Driving procedures Engine (ignition) switch ............ 193
Automatic transmission............ 198
Turn signal lever..........................204
Parking brake ............................. 205
4-3. Operating the lights and wipers
Headlight switch ........................ 206
Automatic High Beam .............. 210
Fog light switch ............................ 215
Windshield wipers and washer........................................... 217
Rear window wiper and washer.......................................... 222
Headlight cleaner switch ........ 224
4-4. Refueling Opening the fuel tank cap......225 4-5. Using the driving support
systems
Cruise control ............................. 229
Dynamic radar cruise control ......................................... 232
LDA (Lane Departure Alert) ........ 243
Intuitive parking assist .............. 249
Rear view monitor system ......258
Lexus parking assist monitor ........................................ 268
Wide view front & side monitor ........................................ 294
Multi-terrain Select .................... 312
Multi-terrain Monitor .................317
Rear height control air suspension .................................. 341
AVS (Adaptive Variable Suspension System)............... 345
Four-wheel drive system ........ 346
Crawl Control .............................350
Downhill assist control system ..........................................353
Driving assist systems ..............355
BSM (Blind Spot Monitor) ...... 361 • The Blind Spot Monitor function .................................... 366
• The Rear Cross Traffic Alert function ......................... 369
PCS (Pre-Collision system) .......... 372
4-6. Driving tips Winter driving tips ...................... 381
Off-road precautions ...............384

GX460_OM_OM60Q84U_(U)
2074-3. Operating the lights and wipers
4
Driving
Type BThe daytime running lights
turn on. ( P. 208)
The side marker, parking,
tail, license plate, instrument
panel lights, and daytime
running lights ( P. 208)
turn on.
The headlights and all lights
listed above (except day-
time running lights) turn on.
The headlights, parking
lights, daytime running
lights ( P. 208) and so on
turn on and off automati-
cally (when the engine
switch is in IGNITION ON
mode).
With the headlights on, push the
lever away from you to turn on the
high beams.
When the light switch is in “AUTO” posi-
tion, the Automatic High Beam system
will be activated. ( P. 210)
Pull the lever toward you to the center
position to turn the high beams off.
Pull the lever toward you and release
it to flash the high beams once.
You can flash the high beams with the headlights on or off.
1
2
3
4
Turning on the high beam headlights
1
2

210
GX460_OM_OM60Q84U_(U)4-3. Operating the lights and wipers
Automatic High Beam
Turn the headlight switch to the
“AUTO” position.
Push the lever away from you.
The Automatic High Beam indicator will
come on when the headlights are turned
on automatically to indicate that the sys-
tem is active.
: If equipped
The Automatic High Beam uses an in-vehicle camera sensor to assess the
brightness of streetlights, the lights of
oncoming and preceding vehicles, etc.,
and automatically turns high be am on or off as necessary.
Activating the Automatic High Beam system
1
2

GX460_OM_OM60Q84U_(U)
2114-3. Operating the lights and wipers
4
Driving
■Switching to low beam
Pull the lever to original position.
■Switching to high beam
Turn the light switch to posi-
tion.
Turning the high beam on/off manually

212
GX460_OM_OM60Q84U_(U)4-3. Operating the lights and wipers
When all of the following conditions are
fulfilled, high beam will be automatically
turned on (after approximately 1 second):
●Vehicle speed is above approximately 20 mph (32 km/h).
●The area ahead of the vehicle is dark.
●There are no oncoming or preceding ve hicles with headlights or tail lights
turned on.
If any of the following co nditions are fulfilled, high beam will be automatically
turned off:
●Vehicle speed drops below appr oximately 20 mph (32 km/h).
●The area ahead of the vehicle is not dark.
●Oncoming or preceding vehicles have headlights or tail lights turned on.
■Limitations of the Automatic High Beam
Do not rely on the Automatic High Beam. Al ways drive safely, taking care to observe
your surroundings and turning high beam on or off manually if necessary.
■Camera sensor detection information
●High beam may not be automatically turned off in the following situations:
• When oncoming vehicles sudd enly appear from a curve.
• When another vehicle cuts across in front of you.
●High beam may be turned off if an oncoming vehicle that is using fog lights without
using the headlights is detected.
●Houselights, streetlights, red traffic signals, and illuminated billboards or signs may
cause the high beam to turn off.
●The following factors may affect the amount of time taken to turn high beam on or off:
• The brightness of headlights, fog lights, and tail lights of oncoming and preceding
vehicles
• Road conditions (wetness, ice, snow etc.)
• The number of passengers and amount of baggage
●High beam may be turned on or of f when unexpected by the driver.
High beam automatic turning on or off conditions

GX460_OM_OM60Q84U_(U)
2134-3. Operating the lights and wipers
4
Driving
●In the situations below, the system may not be able to correctly detect the surrounding
brightness levels, and may flas h or expose nearby pedestrians to the high beam. There-
fore, you should consider turning the high be am on or off manually rather than relying
on the Automatic High Beam system.
• In bad weather (rain, snow, fog, sandstorms etc.)
• The windshield is obscured by fog, mist, ice, dirt etc.
• The windshield is cracked or damaged.
• The inside rear view mirror or ca mera sensor is deformed or dirty.
• The camera sensor temperature is extremely high.
• Surrounding brightness levels are equal to th ose of headlights, tail lights or fog lights.
• Vehicles ahead have headlights that are either switched off, dirty, are changing color,
or are not aimed properly.
• When driving through an area of intermittently changing brightness and darkness
• When frequently and repeated ly driving ascending/descending roads, or roads with
rough, bumpy or uneven surfaces (such as stone-paved roads, gravel tracks etc.)
• When frequently and repeatedly taking curves or driving on a winding road
• There is a highly reflective object ahead of the vehicle, such as a sign or a mirror.
• The back of a vehicle ahead is highly re flective, such as a container on a truck.
• The vehicle’s headlights are damaged or dirty.
• The vehicle is listing or tilting, due to a flat tire, a trailer being towed etc.
• The Automatic High Beam indicator is flashing.
• The high beam and low beam are repeated ly being switched between in an abnor-
mal manner.
• The driver believes that the high beam may be causing problems or distress to other
drivers or pedestrians nearby.
■If the Automatic High Be am indicator flashes...
It may indicate a malfun ction in the system. Contact your Lexus dealer.
■Temporary lowering sensor sensitivity
The sensitivity of the sensor can be temporarily lowered.
To lower the sensitivity, push and hold the “A UTO” button on the inside rear view mirror
for 15 to 20 seconds, and release. The indica tor light on the inside rear view mirror will
flash to indicate that the sensitivity has been lowered.
When the engine switch is turned off, the se nsitivity will be returned to its normal level.
■Customization that can be conf igured at your Lexus dealer
The Automatic High Beam can be turned off.