OPTIMA FEATURES & FUNCTIONS GUIDE6*IF EQUIPPED
Driving while distracted is dangerous and should be avoided. Drivers should remain attentive to driving and always exercise caution when using the steering-wheel-mounted controls while driving.
LCD Instrument Cluster Modes*
( Type B; Buttons located on Steering Wheel)
A
BTrip Computer Mode: Displays driving information for
tripmeter, fuel economy, etc .
Turn-by-Turn Mode*: Displays the state of the navigation
Assist Mode*: Displays the state of the SCC with S&G,
Lane Keeping Assist, TPMS, Driver Attention Warning (DAW )
Master Warning Mode: Informs on low tire pressure
warnings, Blind-Spot Collision Warning (BCW ) system
malfunction and other systems
User Settings Mode: Change settings of the doors, lamps
and other features
Press Mode button A to scroll through different LCD Instrument
Cluster Modes .
Type B cluster:
Your vehicle’s steering wheel buttons may differ from those in the illustrations.
Trip Modes / Trip Computer
The Trip Computer is a system to relay pertinent
driving information . It appears on the display
when the ignition switch or the Engine Start /
Stop button* is in the ON position .
To cycle through the Trip Modes, press the
Mode button A .
To select and enter Trip Computer mode ,
press the OK button B up/down and then press
OK button B again to enter . To cycle through
different screens (Fuel Economy, Trip A, Trip
B), press the OK button B up/down and press
again to enter . When displaying TRIP A or TRIP
B screens, press and hold the OK button B to
reset the Tripmeter to zero .
REMINDERS:
•
Appearance of Tripmeter display may differ as equipped
•
All stored driving information (except Odometer and Range) is reset if the battery is disconnected
INSTRUMENT CLUSTER
FUEL ECONOMY• Average MPG• Instant MPG
ACCUMULATED INFO• Tripmeter• Average MPG• Elapsed Time (E/T)
DRIVE INFO• Tripmeter• Average MPG• Elapsed Time (E/T)
DIGITAL SPEEDOMETER
DRIVE MODE
TRANSMISSION
TEMPERATURE*
(Type B Cluster)
OPTIMA FEATURES & FUNCTIONS GUIDE8*IF EQUIPPED
To view a video on your mobile device, snap these QR Codes or visit the listed website .
Refer to page 2 for more information .
LCD Display Video
LCD Display: Maintenance Video
www.youtube.com/KiaFeatureVideos
www.youtube.com/KiaFeatureVideos
QR CODESUser SettingsService Interval Mode
To enter the User Settings mode in the
LCD Instrument Cluster Modes, press the
Mode button A when the vehicle is at a
standstill and with the ignition switch or
the Engine Start /Stop button* in the ON
position, and select User Settings .
You can navigate the selections on the display by pressing the
Select /Reset (OK ) button B up and down, and then selecting the
item by pressing the OK button B again .
( Type B; Located on Steering Wheel)
A
B
Driving Assistance*: •Highway Auto Speed* •Driver Attention Warning* •Lane Safety* •Rear Cross-Traffic Collision Warning (RCCW )* •Forward Collision Warning (FCW )* •Forward Collision-Avoidance Assist (FCA)* •Blind-Spot Collision Warning* •Smart Cruise Control Reaction*
Door/Trunk: •Automatically Lock •Automatically Unlock •Smart Power Trunk* •Two-Press Unlock •Horn Feedback
Convenience: •Seat-Easy Access* •Welcome Mirror/Light* •Wireless Charging System* •Wiper/Light Display* •Gear Position Pop-Up* •Icy-Road Warning*
Lights: •Ambient Light Brightness* •Ambient Light Color* •One-Touch Turn Signal* •Headlamp Delay •Welcome Light*
Sound: •Parking Distance Warning-Reverse* System Volume* •Welcome Sound*
Service Interval: •Enable Service Interval •Adjust Interval •Reset
Language: •Choose the language
Other Features: •Fuel Economy Auto Reset •Fuel Economy Unit •Temperature Unit •Tire Pressure Unit*
Reset: •Reset User Setting menus
To enter Service Interval mode, press the Mode
button A, scroll using the OK button B to User
Settings and press the OK button B to enter .
Then scroll to Service Interval and press OK button
again B . System will display number of miles
remaining until next service is due, as well as
type of service .
When service is required,
the following will be
displayed: Service
Required .
To reset the Service Interval
mode system, press and
hold the OK button B for
more than 1 second .
To turn Service In OFF,
go to User Settings .
Service Interval Setting
To set the service interval
when in User Settings
mode:
•Press the OK button B up/down and scroll to
Service Interval . Press the OK button B again
to enter
•Press the OK button B and toggle to ON, then
press the OK button B again to set . Then press
the Move button B up/down to scroll and select
the desired miles or months for your next service
•Press the OK button B again to enter
Service in
Off
Service Required
-200mi -8days
Service in
1500mi 365days
(Type B cluster)
INSTRUMENT CLUSTER
