P
PR
R O
O C
CE
E D
D U
U R
RE
E
F
F O
O R
R
E
E N
N T
TE
ER
R I
IN
N G
G
F
F O
O R
RC
CE
E D
D
E
E N
N G
GI
IN
N E
E
A
A C
CT
T I
IV
V A
A T
TI
IO
O N
N
M
M O
OD
DE
E
If the engine needs to be kept run-
ning whilst the vehicle is stopped to
inspect emission gas or perform
vehicle maintenance, follow below
procedure to enter forced engine
activation mode.
1. Place the shift lever in P (Park)
position with the vehicle stopped.
Engage the parking brake. Then,
follow the steps (1) to (5).
Information
Below steps from (1) to (5) must be
completed within 60 sec. If not, the
process is reset and you must start
again from step (1). (1) Turn the ignition switch to the ON
position. Vehicles equipped with
the smart key, press the Engine
Start/Stop button twice without
depressing the brake pedal.
(2) Place the shift lever in P (Park) position and depress the acceler-
ator pedal twice.
(3) Place the shift lever in N (Neutral) position and depress the acceler-
ator pedal twice.
(4) Place the shift lever in P (Park) position and depress the acceler-
ator pedal twice.
(5) With the brake pedal depressed, start the engine, and maintain
idling state.
Information
The engine remains in idle state and
the forced engine activation mode is
maintained even when the gear is
shifted to a different position. 2. " " indicator on the instrument
cluster blinks when the vehicle is
in forced engine activation mode.
Check the " " indicator blinking
to ensure that the forced engine
activation mode is correctly
entered.
Information
The " " indicator continues blink-
ing until the forced engine activation
mode is cancelled. When the mode is
cancelled the " " indicator will
stop blinking.
3. To cancel the forced engine acti-vation mode, turn the vehicle off.
i
i
i
7-81
7
Maintenance
