2019 Hyundai Elantra warning light

[x] Cancel search: warning light

Page 386 of 535

Hyundai Elantra 2019  Owners Manual 6-4
If the Engine Doesnt Turn
Over or Turns Over Slowly 
 Be sure the shift lever is in N(Neutral) or P (Park). The engine
starts only when the shift lever is in
N (Neutral) or P (Park).
 Check the b

Page 393 of 535

Hyundai Elantra 2019  Owners Manual 6-11
What to do in an emergency
6
If any of the below happens, have
the system checked by an author-
ized HYUNDAI dealer.
1. The  Low Tire  Pressure TPMSMalfunction Indicator does not
illuminate for 3

Page 396 of 535

Hyundai Elantra 2019  Owners Manual 6-14
What to do in an emergency
You may not be able identify a tire
with low pressure by simply looking
at it. Always use a good quality tire
pressure gage to measure the tires
inflation pressure. Pl

Page 428 of 535

Hyundai Elantra 2019  Owners Manual 7-6
Maintenance
Owner Maintenance Schedule
When you stop for fuel:
 Check the engine oil level.
 Check coolant level in the enginecoolant reservoir.
 Check the windshield washer fluid level.
 Check fo

Page 474 of 535

Hyundai Elantra 2019  Owners Manual 7-52
Maintenance
Low Aspect Ratio Tires
Low aspect ratio tires, the aspect
ratio is lower than 50, are provided
for sporty looks.
Because low aspect ratio tires are
optimized for handling and braking,

Page 475 of 535

Hyundai Elantra 2019  Owners Manual 7-53
7
Maintenance
F
FU
U S
SE
E S
S
A vehicle’s electrical system is pro-
tected from electrical overload dam-
age by fuses.
This vehicle has 2 (or 3) fuse panels,
one located in the drivers side

Page 486 of 535

Hyundai Elantra 2019  Owners Manual 7-64
Maintenance
L
LI
IG
G H
H T
T 
 B
B U
U L
LB
B S
S
Consult an authorized HYUNDAI
dealer to replace most vehicle light
bulbs. It is difficult to replace vehicle
light bulbs because other parts of

Page 496 of 535

Hyundai Elantra 2019  Owners Manual 7-74
Maintenance1. Using a flat-blade screwdriver,gently pry the lens from the interi-
or lamp housing.
2. Remove the bulb by pulling it straight out.
3. Install a new bulb in the socket.
4. Align the