2019 HONDA CR-V bulb

Contents
Child Safety P. 63Exhaust Gas Hazard P. 76Safety Labels P. 77
Opening and Closing the Tailgate P. 148 Security System P. 159 Opening and Closing the Windows P. 162
Operating the Switches Around the Steering Wheel P. 169 Adjusting the Mirrors P. 193
Interior Lights/Interior Convenience It ems P. 205 Climate Control System P. 224
Audio Error Messages P. 327General Information on the Audio System P. 332
Bluetooth ® HandsFreeLink ® P. 385, 408 Compass* P. 442
Off-Highway Driving Guidelines P. 456 When Driving P. 458 Braking P. 522
Refueling P. 548 Fuel Economy and CO
2 Emissions P. 551 Turbo Engine Vehicle* P. 552
Maintenance Under the Hood P. 567 Replacing Light Bulbs P. 584
Checking and Maintaining Tires P. 595 Battery P. 604 Remote Transmitter Care P. 606
Cleaning P. 609 Accessories and Modifications P. 614
Engine Does Not Start P. 624Jump Starting P. 627 Shift Lever Does Not Move P. 630
Fuses P. 640 Emergency Towing P. 644
Refueling P. 646
Devices that Emit Radio Waves P. 652 Reporting Safety Defects P. 653
Authorized Manuals P. 658 Customer Service Information P. 659
Quick Reference GuideP. 4
Safe DrivingP. 33
Instrument PanelP. 79
ControlsP. 129
FeaturesP. 229
DrivingP. 445
MaintenanceP. 553
Handling the UnexpectedP. 615
InformationP. 647
IndexP. 661
19 CR-V ELP HCM MAP HMIN-31TLA6200.book 3 ページ ２０１８年８月２２日　水曜日　 午後２時５９分

89
uuIndicators u
Continued
Instrument Panel
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
IndicatorNameOn/BlinkingExplanationMessage*
System Message
Indicator*
●Comes on along with a beep
when a problem is detected. A
system message on the driver
information interface appears at
the same time.●While the indicator is on, press the
(display/information) button to see the
message again.
●Refer to the Indicators information in this
chapter when a system message appears
on the driver information interface. Take
the appropriate action for the message.
●The driver information interface does not
return to the normal screen unless the
warning is canceled, or the button
is pressed.
—
Turn Signal and
Hazard Warning
Indicators
●Blink when you operate the turn
signal lever.
●Blinks along with all turn signals
when you press the hazard
warning button.
●Does not blink or blinks rapidly
2 Replacing Light Bulbs P. 588—
High Beam
Indicator●Comes on when the high beam
headlights are on.——
Auto High-beam
System Indicator*
●Comes on when all the operating
conditions of the Auto high-beam
system are met.2Auto High-Beam System* P. 179—
Lights On
Indicator
●Comes on when the light switch
in a position other than OFF or
when the switch is set to AUTO
*
and the exterior lights come on.
●If you remove the key from the ignition
switch*1 while the exterior lights are on, a
chime sounds when the driver's door is
opened.—
* Not available on all models
19 CR-V ELP HCM MAP HMIN-31TLA6200.book 89 ページ ２０１８年８月２２日　水曜日　午後２時５９分

553
Maintenance
This chapter discusses basic maintenance.
Before Performing MaintenanceInspection and Maintenance ............ 554
Safety When Performing Maintenance...555Parts and Fluids Used in Maintenance Service ........................................... 556
Maintenance Minder
TM..................... 557
Maintenance Under the Hood Maintenance Items Under the Hood .. 567
Opening the Hood ........................... 569
Recommended Engine Oil ................ 570
Oil Check ......................................... 571
Adding Engine Oil ............................ 573
Changing the Engine Oil and Oil Filter ...574
Engine Coolant ................................ 577
Transmission Fluid ............................ 581
Brake Fluid ....................................... 582
Refilling Window Washer Fluid......... 583
Replacing Light Bulbs ....................... 584
Checking and Maintaining Wiper Blades... 591Checking and Maintaining Tires
Checking Tires ................................. 595
Tire and Loading Information Label ...... 596Tire Labeling .................................... 596DOT Tire Quality Grading (U.S. Vehicles).. 598Wear Indicators................................ 600
Tire Service Life ................................ 600 Tire and Wheel Replacement ........... 601
Tire Rotation .................................... 602
Winter Tires ..................................... 603
Battery ............................................... 604
Remote Transmitter Care Replacing the Button Battery ........... 606
Climate Control System Maintenance .. 608Cleaning
Interior Care .................................... 609
Exterior Care.................................... 611
Accessories and Modifications .......... 614
19 CR-V ELP HCM MAP HMIN-31TLA6200.book 553 ページ ２０１８年８月２２日　水曜日　午後２時５９分

554
Maintenance
Before Performing Maintenance
Inspection and Maintenance
For your safety, perform all listed inspections and maintenance to keep your vehicle
in good condition. If you become aware of any abnormality (noise, smell, insufficient
brake fluid, oil residue on the ground, etc.), have your vehicle inspected by a dealer.
(Note, however, that service at a dealer is not mandatory to keep your warranties in
effect.)
■Daily inspections
Perform inspections before long distance trips, when washing the vehicle, or when
refueling.
■Periodic inspections
• Check the brake fluid level monthly.
2 Checking the Brake Fluid P. 582
•Check the tire pressure monthly. Examin e the tread for wear and foreign objects.
2Checking and Maintaining Tires P. 595
•Check the operation of the exterior lights monthly.
2 Replacing Light Bulbs P. 584
•Check the condition of the wiper bl ades at least every six months.
2Checking and Maintaining Wiper Blades P. 591
■Types of Inspection and Maintenance
1Inspection and Maintenance
Maintenance, replacement, or repair of
emissions control devices and systems may be
done by any automotive repair establishment or
individuals using parts that are “certified” to
EPA standards.
According to state and fede ral regulations, failure to
perform maintenance on the maintenance main
items marked with # will not void your emissions
warranties. However, all ma intenance services should
be performed in accordan ce with the intervals
indicated by the information display
*/driver
information interface*.
2 Maintenance Service Items P. 559, 564
If you want to perform complex maintenance tasks
that require more skills a nd tools, you can purchase a
subscription to the Service Express website at
www.techinfo.honda.com .
2 Authorized Manuals P. 658
If you want to perform ma intenance yourself, make
sure that you have the necessary tools and skills first.
After performing ma intenance, update the records in
the separate maintenance booklet.
U.S. models
* Not available on all models
19 CR-V ELP HCM MAP HMIN-31TLA6200.book 554 ページ ２０１８年８月２２日　水曜日　午後２時５９分

584
Maintenance
Replacing Light Bulbs
Headlight Bulbs
When replacing, use the following bulbs.1.Push the tab to remove the coupler.
2. Rotate the old bulb counter-clockwise to
remove.
3. Insert a new bulb into the headlight
assembly and turn it clockwise.
4. Insert the coupler into the connector of the
bulb.
High beam headlight: 60 W (HB3 for halogen bulb type)*
High beam headlight: LED type*
Low beam headlight: 55 W (H11 for halogen bulb type)*
Low beam headlight: LED type*
■High Beam Headlights
1Headlight Bulbs
NOTICE
Halogen bulbs get very hot when lit.
Oil, perspiration, or a scratch on the glass can cause
the bulb to overhe at and shatter.
The headlight aim is set by the factory, and does not
need to be adjusted. Howeve r, if you regularly carry
heavy items in the cargo area or tow a trailer, have
the aiming readjusted at a dealer or by a qualified
technician.
When replacing a halogen bulb, handle it by its base,
and protect the glass from c ontact with your skin or
hard objects. If you touch the glass, clean it with
denatured alcohol and a clean cloth.
Headlights are LED type. Ha ve an authorized Honda
dealer inspect and replace the light assembly.
Models with halogen headlights
Models with LED headlights
Coupler
Bulb
Tab
* Not available on all models
19 CR-V ELP HCM MAP HMIN-31TLA6200.book 584 ページ ２０１８年８月２２日　水曜日　午後２時５９分

585
uuReplacing Light Bulbs uHeadlight Bulbs
Maintenance
1. Remove the holding clip using a flat-tip
screwdriver, then remo ve the upper part of
the window washer reserve tank.
2. Push the tab to remove the coupler.
3. Rotate the old bulb counter-clockwise to
remove.
4. Insert a new bulb into the headlight
assembly and turn it clockwise.
5. Insert the coupler into the connector of the
bulb.
■Low Beam Headlights1 Low Beam Headlights
Insert a flat-tip screwdriver, lift and remove the center
pin to remove the clip.
Insert the clip with the center pin raised, and push
until it is flat.
Holding clip
Center pin
Push until the
pin is flat.
Holding clipPassenger side
Coupler
Bulb
Tab
Both side
19 CR-V ELP HCM MAP HMIN-31TLA6200.book 585 ページ ２０１８年８月２２日　水曜日　午後２時５９分

586
uuReplacing Light Bulbs uFog Light Bulbs*
Maintenance
Fog Light Bulbs*
When replacing, use the following bulbs.
1.Remove the screw using a Phillips-head
screwdriver and remove the holding clips
using a flat-tip screwdriver.
2. Pull down the under cover.
Fog Light: 35 W (H8 fo r halogen bulb type)
1Fog Light Bulbs*
NOTICE
Halogen bulbs get very hot wh en lit. Oil, perspiration,
or a scratch on the glass can cause the bulb to
overheat and shatter.
When replacing a halogen bulb, handle it by its
plastic case, and protect th e glass from contact with
your skin or hard objects. If you touch the glass, clean
it with denatured alc ohol and a clean cloth.
Screw
Holding clip
* Not available on all models
19 CR-V ELP HCM MAP HMIN-31TLA6200.book 586 ページ ２０１８年８月２２日　水曜日　午後２時５９分

587
uuReplacing Light Bulbs uFog Light Bulbs*
Maintenance
3. Push the tab to remove the coupler.
4. Rotate the old bulb clockwise to remove.
5. Insert a new bulb into the fog light
assembly and turn it counter-clockwise.
6. Insert the coupler into the connector of the
bulb.
4. Rotate the old bulb counter-clockwise to
remove.
5. Insert a new bulb into the fog light
assembly and turn it clockwise.
6. Insert the coupler into the connector of the
bulb.1 Fog Light Bulbs*
Insert a flat-tip screwdriver, lift and remove the center
pin to remove the clip.
Insert the clip with the center pin raised, and push
until it is flat.
Holding clip
Bulb
TabCoupler
Right side
Bulb
CouplerTab
Left side
* Not available on all models
19 CR-V ELP HCM MAP HMIN-31TLA6200.book 587 ページ ２０１８年８月２２日　水曜日　午後２時５９分