Page 156 of 591

uuSecurity System uSecurity System Alarm
154
Controls
■Setting the security system alarm
The security system alarm  automatically sets when the following conditions have 
been met:
• The power mode is set to VEHICLE OFF (LOCK).
• The hood is closed.
• All doors and the trunk are locked from  outside with the key, remote transmitter 
or smart entry system.
■When the security system alarm sets
The security system alarm indicator in  the instrument panel blinks. When the 
blinking interval changes after about 15  seconds, the security system alarm is set.
■To cancel the security system alarm
The security system alarm is canceled when  the vehicle is unlocked using the remote 
transmitter, smart entry system, or the power mode is set to ON. The security system 
alarm indicator goes off at the same time.
1 Security System Alarm
Do not set the security system alarm when someone 
is in the vehicle or a window  is open. The system can 
accidentally activate when:
•Unlocking the door with the lock tab.•Opening the trunk with the trunk opener or the 
emergency trunk opener.
•Opening the hood with the hood release.
If the 12-volt battery goes dead after you have set the 
security system alarm, the security alarm may go off 
once the 12-volt battery is  recharged or replaced.
If this occurs, deactivate the security system alarm by 
unlocking a door using the key,  remote transmitter or 
smart entry system.
19 CLARITY PHEV-31TRW6100.book  154 ページ  2018年10月25日 木曜日 午後2時29分 
     
        
        Page 166 of 591

uuOperating the Switches Around the Steering Wheel uLight Switches
164
Controls
The headlights automatically co me on when the wipers are used several times within 
a certain number of intervals wi th the headlight switch in AUTO.
The headlights automatically go off a few  minutes later if the wipers are stopped.
The headlights, all other exterior lights, an d the instrument panel lights turn off 15 
seconds after you set the power mode to VE HICLE OFF (LOCK), take the remote with 
you, and close th e driver's door.
If you set the power mode to VEHICLE OFF  (LOCK) with the headlight switch on, but 
do not open the door, the lights turn off after 10 minutes (3 minutes, if the switch 
is in the  AUTO position).
The lights turn on again when you unlock or  open the driver’s door. If you unlock 
the door, but do not open it within 15 seconds, the lights go off. If you open the 
driver’s door, you will hear  a lights on reminder chime.
■Headlight Integration with Wipers
■Automatic Lighting Off Feature
1Headlight Integration with Wipers
This feature activates while the headlights are off in 
AUTO .
The instrument panel br ightness does not change 
when the headlights come on.
At dark ambient light leve ls, the automatic lighting 
control feature turns on the headlights, regardless of 
the number of wiper sweeps.
You can turn the headlight  integration with wipers 
function on and off. 2 Customized Features  P. 306
1Automatic Lighting Off Feature
 You can change the headli ght auto off timer setting.
2 Customized Features  P. 306
19 CLARITY PHEV-31TRW6100.book  164 ページ  2018年10月25日 木曜日 午後2時29分 
     
        
        Page 170 of 591

168
uuOperating the Switches Around the Steering Wheel uBrightness Control
Controls
Brightness Control
When the power mode is in ON, you can use 
the 
(+ or (- button to adjust instrument 
panel brightness.
Brighten:  Press the 
(+ button.
Dim:  Press the 
(- button.
You will hear a beep when the brightness 
reaches minimum or maximum. Several 
seconds after adjusting the brightness, you 
will be returned to the previous display.
■Brightness level indicator
The brightness level is shown on the display 
while you are adjusting it.
1 Brightness Control
Instrument panel brightne ss varies, depending on 
whether the exterior lights are on or off. The 
instrument panel dims to  reduce glare when they are 
on.
When it is bright out side and the headlight 
integration with the wi per is activated, the 
instrument panel bri ghtness does not change.
To cancel the reduced in strument panel brightness 
when the exterior lights are on, press the 
( + button 
until the brightness display is up to max, the beeper 
sounds.
The brightness can be set  differently for when the 
exterior lights are on, and when they are off.
( + Button
(- Button
19 CLARITY PHEV-31TRW6100.book  168 ページ  2018年10月25日 木曜日 午後2時29分 
     
        
        Page 174 of 591

172
uuOperating the Switches Around the Steering Wheel uAdjusting the Steering Wheel
Controls
Adjusting the Steering Wheel
The steering wheel height and distance from your body can be adjusted so that you 
can comfortably grip the steering wheel in an appropriate driving posture.
1.Push the steering wheel adjustment lever 
down.
u The steering wheel adjustment lever is 
under the steering column.
2. Move the steering wheel up or down, and 
in or out.
u Make sure you can see the instrument 
panel gauges and indicators.
3. Pull the steering wheel adjustment lever up 
to lock the steering  wheel in position.
u After adjusting the position, make sure 
you have securely locked the steering 
wheel in place by trying to move it up, 
down, in, and out.1Adjusting the Steering Wheel
3WARNING
Adjusting the steering wheel position while 
driving may cause you to lose control of the 
vehicle and be seriously injured in a crash.
Adjust the steering wheel only when the 
vehicle is stopped.
To adjust
To lock
19 CLARITY PHEV-31TRW6100.book  172 ページ  2018年10月25日 木曜日 午後2時29分 
     
        
        Page 214 of 591
212
uuAudio System Basic Operation uAudio/Information Screen
Features
■Using the audio/information screen
Select   to go to the home screen.
Select  Phone,  Info, Audio , Settings , Navigation
*, HondaLink , Smartphone 
Connection ( Apple CarPlay,  Android Auto), App List  ( ), or Instrument Panel .
■Phone
Displays the HFL information.
2 Bluetooth ® HandsFreeLink ® P. 337
Home Screen
Models without navigation system
Models with navigation system
* Not available on all models
19 CLARITY PHEV-31TRW6100.book  212 ページ  2018年10月25日 木曜日 午後2時29分 
     
        
        Page 216 of 591
214
uuAudio System Basic Operation uAudio/Information Screen
Features
■Settings*
Enters the customiz ing menu screen.
2Customized Features  P. 306
■Navigation*
Displays the navigation screen.
2Refer to the Navigation System Manual
■HondaLink ®
Displays the Hondalink ® screen.
2HondaLink ® P. 269
■Smartphone Connection
Displays the Apple CarPlay or Android Auto.
2 Apple CarPlay P. 277
2 Android Auto  P. 280
■App List ( )
Adds or removes apps or widgets on the Home screen.
2 Home Screen  P. 225
■Instrument Panel
Selects from three customizable settings for the driver information interface.
* Not available on all models
19 CLARITY PHEV-31TRW6100.book  214 ページ  2018年10月25日 木曜日 午後2時29分 
     
        
        Page 221 of 591
Continued219
uuAudio System Basic Operation uAudio/Information Screen
Features
1. Select .
2. Select and hold an icon.
u The screen switches  to the customization 
screen.
3. Drag and drop the icon to where you want 
it to be.
4. Select  OK.
u The screen will return to the home 
screen.
You can edit, add, or delete the meter cont ents on the driver information interface.
1.
2. Settings
3. System
4. Configuration of Instrument Panel
■Changing the Home Screen Icon Layout
■Customizing the Meter1 Customizing the Meter
You can store up to three cu stomized configurations. 
To select or customize a configuration, press  Swap 
Config. .
When you select  Swap Config. during 
customization, the settings  you changed will be 
saved.
When you select   during customization, the 
settings you changed will  not be saved and you will 
be returned to the  Instrument Panel screen.
19 CLARITY PHEV-31TRW6100.book  219 ページ  2018年10月25日 木曜日 午後2時29分 
     
        
        Page 222 of 591
uuAudio System Basic Operation uAudio/Information Screen
220
Features
■Editing order
To change the order of the icons on the  driver information interface, first select:
1. Edit Order
2. Select the icon you want to move.
u You will see arrows on both sides of the 
selected icon.
3. Select the left or right arrow repeatedly to 
move the icon to your desired position.
4. Select  OK.
u The screen will return to the  Instrument 
Panel  screen.1Editing order
You can use an alternative method to change the 
order of the icons. First select:
1. Edit Order
2. Select and hold the icon you want to move.
3. Drag and drop the icon to where you want it to  be.
4. Select OK .
u The screen will return to the  Instrument Panel 
screen.
Edit Order
Select
Arrow icons OK
19 CLARITY PHEV-31TRW6100.book  220 ページ  2018年10月25日 木曜日 午後2時29分