Page 88 of 591

86
Instrument Panel
Indicators
IndicatorNameOn/BlinkingExplanationMessage
Parking Brake 
and Brake 
System Indicator 
(Red)
●Comes on for a few seconds when 
you set the power mode to ON, 
then goes off if the parking brake 
has been released.
●Comes on when the parking brake 
is applied, and goes off when it is 
released.
●Comes on when the brake fluid 
level is low.
●Comes on if there is a problem 
with the brake system.
●The beeper sounds and the 
indicator comes on if you drive 
with the parking brake not fully 
released.
●Comes on while driving - Make sure 
the parking brake is released. Check the 
brake fluid level.
2 What to do when the indicator 
comes on while driving P. 550
●Comes on along with the parking 
brake and brake system indicator 
(amber)  - Immediately stop in a safe 
place. Contact an  authorized Honda 
Clarity Plug-In Hybrid dealer for repair. 
The brake pedal becomes harder to 
operate. Depress the pedal further than 
you normally do.
●Comes on along with the ABS 
indicator  - Have your vehicle checked by 
an authorized Honda Clarity Plug-In 
Hybrid dealer.
2 If the Brake System Indicator (Red) 
Comes On or Blinks P. 550
U.S.
Canada
(Red)
19 CLARITY PHEV-31TRW6100.book  86 ページ  2018年10月25日 木曜日 午後2時29分 
     
        
        Page 89 of 591

87
uuIndicators u
Continued
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Parking Brake 
and Brake 
System Indicator 
(Red)
●Comes on for about 15 seconds 
when you push the electric parking 
brake switch while the power 
mode is in VEHICLE OFF.
●Stays on for about 15 seconds 
when you set the power mode to 
VEHICLE OFF while the electric 
parking brake is set.
●Blinks and the parking brake and 
brake system indicator (amber) comes 
on at the same time  - There is a 
problem with the electric parking brake 
system. The parking brake may not be 
set.
Avoid using the parking brake and have 
your vehicle checked  by an authorized 
Honda Clarity Plug-In Hybrid dealer 
immediately.
2 If the Brake System Indicator (Red) 
Comes On or Blinks at the Same 
Time When the Brake System 
Indicator (Amber) Comes On P. 552
—
Automatic Brake 
Hold System 
Indicator
●Comes on for a few seconds when 
you set the power mode to ON, 
then goes off.
●Comes on when the automatic 
brake hold system is on.
2Automatic Brake Hold  P. 438
Automatic Brake 
Hold Indicator
●Comes on for a few seconds when 
you set the power mode to ON, 
then goes off.
●Comes on when the automatic 
brake hold is activated.2Automatic Brake Hold  P. 438—
U.S.
Canada
(Red)
U.S.
Canada
19 CLARITY PHEV-31TRW6100.book  87 ページ  2018年10月25日 木曜日 午後2時29分 
     
        
        Page 90 of 591

88
uuIndicators u
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Parking Brake 
and Brake 
System Indicator 
(Amber)
●Comes on for a few seconds when 
you set the power mode to ON, 
then goes off.
●Comes on if there is a problem 
with a system related to braking 
other than the conventional brake 
system.
●Comes on if there is a problem 
with the cooperative control with 
regenerative braking, the electric 
servo brake system, or the hill start 
assist system.
●Comes on if there is a problem 
with the electric parking brake 
system or the automatic brake 
hold system.
●Comes on while driving  - Avoid using 
the parking brake and have your vehicle 
checked by an author ized Honda Clarity 
Plug-In Hybrid dealer immediately.
●Stays on constantly  - Avoid high speeds 
and sudden braking. Take the vehicle to 
an authorized Honda Clarity Plug-In 
Hybrid dealer immediately.
●With this indicator on, your vehicle still 
has normal braking ability.
POWER 
SYSTEM  
Indicator
●Comes on for a few seconds when 
you set the power mode to ON, 
then goes off.
●Comes on if there is a problem 
with the electric ve hicle system or 
plug-in charging system.
●Have your vehicle checked by an 
authorized Honda Clarity Plug-In Hybrid 
dealer.
U.S.
Canada
(Amber)
19 CLARITY PHEV-31TRW6100.book  88 ページ  2018年10月25日 木曜日 午後2時29分 
     
        
        Page 91 of 591
89
uuIndicators u
Continued
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
EV Indicator
●Comes on for a few seconds when 
you set the power mode to ON, 
then goes off.
●Comes on when the vehicle is 
moved by the motor, and the 
engine is not operating.——
HV  Indicator
●Comes on for a few seconds when 
you set the power mode to ON, 
then goes off.
——
●Comes on when the vehicle is in 
HV.2SPORT HYBRID i-MMD Plug-in 
(Intelligent Multi-mode Drive Plug-
in) P. 11
●Comes on when the vehicle is in 
HV charge.2 SPORT HYBRID i-MMD Plug-in 
(Intelligent Multi-mode Drive Plug-
in) P. 11
HV Charge 
Indicator
●Comes on for a few seconds when 
you set the power mode to ON, 
then goes off.
——
●Comes along with the  HV 
indicator when the  vehicle is in HV 
charge.2 SPORT HYBRID i-MMD Plug-in 
(Intelligent Multi-mode Drive Plug-
in) P. 11
19 CLARITY PHEV-31TRW6100.book  89 ページ  2018年10月25日 木曜日 午後2時29分 
     
        
        Page 92 of 591

90
uuIndicators u
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
READY Indicator
●Comes on when the vehicle is 
ready to drive.●May go off if the  POWER SYSTEM  or 
transmission system indicator comes on.
2 Turning on the Power  P. 378
Malfunction 
Indicator Lamp
●Comes on when you set the power 
mode to ON, and goes off either 
when the power system is on or 
after several seconds if the vehicle 
did not start. If “readiness codes” 
have not been set, it blinks five 
times before it goes off.
●Comes on if there is a problem 
with the emissions control system.
●Blinks when a misfire in the 
engine's cylinders is detected.
●Readiness codes are part of the on board 
diagnostics for the emissions control 
systems.
2 Testing of Readiness Codes  P. 573●Comes on while driving - Have your 
vehicle checked by an  authorized Honda 
Clarity Plug-In Hybrid dealer.
●Blinks while driving  - Stop in a safe 
place where there are no flammable 
objects. Stop the power system for 10 
minutes or more, and wait for the engine 
to cool down. Then, t ake the vehicle to an 
authorized Honda Clarity Plug-In Hybrid 
dealer.
2 If the Malfunction Indicator Lamp 
Comes On or Blinks P. 549
12-Volt Battery 
Charging System 
Indicator
●Comes on when you set the power 
mode to ON, and  goes off when 
the power system is on.
●Comes on when the 12-volt 
battery is not charging.
●Comes on while driving  - Turn off the 
climate control system and rear defogger 
in order to reduce electricity 
consumption.
2 If the 12-Volt Battery Charging 
System Indicator Comes On  P. 548
19 CLARITY PHEV-31TRW6100.book  90 ページ  2018年10月25日 木曜日 午後2時29分 
     
        
        Page 93 of 591
91
uuIndicators u
Continued
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Low Fuel 
Indicator
●Comes on when the fuel reserve is 
running low (approximately 1.1 
U.S. gal./4.0 Liter left).
●Blinks if there is a problem with the 
fuel gauge.
●Comes on - Refuel your vehicle as soon 
as possible.
●Blinks  - Have your vehicle checked by an 
authorized Honda Clarity Plug-In Hybrid 
dealer.
Gear Position 
Indicator●Indicates the current gear 
selection.
2 Shifting P. 384—
Deceleration 
Paddle Selector 
Indicator
●Comes on when the paddle 
selector is pulled.
●Blinks when deceleration does not 
occur while pulling the paddle 
selector.
●Comes on with  M when  SPORT  
mode is selected and pulling the 
paddle selector.
2 Deceleration Paddle Selector  P. 392—
19 CLARITY PHEV-31TRW6100.book  91 ページ  2018年10月25日 木曜日 午後2時29分 
     
        
        Page 94 of 591

92
uuIndicators u
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Transmission 
System Indicator
●All the gear positions may light for 
several seconds, and go off.●When all the gear positions illuminate, 
immediately stop your vehicle in a safe 
place.
●Indicators go off if there is no problem. 
However, even if they go off, take your 
vehicle to an authorized Honda Clarity 
Plug-In Hybrid dealer for inspection.
●The indicated current gear 
selection blinks if there is a 
problem with the transmission 
system.●Avoid sudden start and acceleration, and 
stop in a safe place immediately.
●Have your vehicle checked by an 
authorized Honda Clarity Plug-In Hybrid 
dealer.
●The indicated current gear 
selection or all the gear positions 
blink if you cannot select 
(P due 
to a transmission system failure.
●The engine can be activated as a 
temporary measure.
2 If the Transmission System Indicator 
Blinks along with the Warning 
Message  P. 554
●Set the parking brake when parking.●Have your vehicle checked by an 
authorized Honda Clarity Plug-In Hybrid 
dealer immediately.
19 CLARITY PHEV-31TRW6100.book  92 ページ  2018年10月25日 木曜日 午後2時29分 
     
        
        Page 95 of 591

93
uuIndicators u
Continued
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Seat Belt 
Reminder 
Indicator
●Comes on and the beeper sounds 
if you are not wearing a seat belt 
when you set the power mode to 
ON.
●If the front passenger is not 
wearing a seat belt, the indicator 
comes on a few seconds later.
●Blinks while driving if either you 
and/or the front passenger has not 
fastened a seat belt. The beeper 
sounds and the indicator blinks at 
regular intervals.
●The beeper stops a nd the indicator goes 
off when you and the front passenger 
fasten their seat belts.
●Stays on after you and/or the front 
passenger has fastened the seat 
belt(s)  - A detection error may have 
occurred in the sensor. Have your vehicle 
checked by an author ized Honda Clarity 
Plug-In Hybrid dealer.
2 Seat Belt Reminder  P. 49
Anti-lock Brake 
System (ABS) 
Indicator
●Comes on for a few seconds when 
you set the power mode to ON, 
then goes off.
●If it comes on at any other time, 
there is a problem with the ABS.
●Stays on constantly  - Have your vehicle 
checked by an author ized Honda Clarity 
Plug-In Hybrid dealer. With this indicator 
on, your vehicle still has normal braking 
ability but no anti-lock function.
2 Anti-lock Brake System (ABS)  P. 440
19 CLARITY PHEV-31TRW6100.book  93 ページ  2018年10月25日 木曜日 午後2時29分