Page 92 of 551

90
uuIndicators u
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
READY Indicator
●Comes on when the vehicle is 
ready to drive.●May go off if the  POWER SYSTEM  or 
transmission system indicator comes on.
2 Turning on the Power  P. 370
12-Volt Battery 
Charging System 
Indicator
●Comes on when you set the power 
mode to ON, and goes off when 
the power system is on.
●Comes on when the 12-volt 
battery is not charging.
●Comes on while driving  - Turn off the 
climate control system and rear defogger 
in order to reduce electricity 
consumption.
2 If the 12-Volt Battery Charging 
System Indicator Comes On  P. 513
Low Fuel 
Indicator●Comes on when the vehicle is 
running low on fuel (3 or 2 fuel-
gauge bars illuminated).●Refuel your vehicle as soon as possible.
Hydrogen Leak 
Indicator
●Comes on for a few seconds when 
you set the power mode to ON, 
then goes off.
●Comes on if a small hydrogen gas 
leak is detected.
●Your vehicle has less ability to accelerate 
and may be harder to start on an incline.
●Have your vehicle checked by an 
authorized Honda Clarity Fuel Cell dealer 
immediately.
●Comes on if a hydrogen gas leak is 
detected.●Generating electricity by the fuel cell is 
stopped.
●Immediately stop in a safe place and have 
your vehicle checked by an authorized 
Honda Clarity Fuel Cell dealer.
19 CLARITY FCV CSS-31TRT6200.book  90 ページ  2019年1月17日 木曜日 午前11時 54分 
     
        
        Page 104 of 551

102
uuIndicators uDriver Information Interface Wa rning and Information Messages
Instrument Panel
Driver Information Interface Warning and Information Messages
The following messages appear only  on the driver information interface. Press th e   (display/information) button to see the mess age 
again with the system  message indicator on.
MessageConditionExplanation
●Appears when the vehicle is  no longer able to run 
due to a malfunction.●Immediately stop in a safe place.
●Appears when the schedul ed maintenance is due 
soon.
●Consequently, Service Due Now  and Service Past 
Due  follow.
2Indicator, Warning Message and Maintenance 
Minder Information on the Driver Information 
Interface  P. 454
●Appears as soon as a problem is detected in the 
smart entry system or push  button starting system.●Appears constantly - Have your vehicle checked by an 
authorized Hond a Clarity Fuel Cell dealer.
●Appears when there is a pr oblem with the sensor on 
the 12-volt battery.●Have your vehicle checked by an authorized Honda 
Clarity Fuel Cell dealer.
2 Checking the 12-Volt Battery  P. 477
●Appears along with the battery charging system 
indicator when the battery is not charging.●Turn off the climate control system and rear defogger to 
reduce electricity consumption.
2If the 12-Volt Battery Charging System Indicator 
Comes On  P. 513
19 CLARITY FCV CSS-31TRT6200.book  102 ページ  2019年1月17日 木曜日 午前11 時54分 
     
        
        Page 381 of 551
![HONDA CLARITY FUEL CELL 2019  Owners Manual (in English) Continued379
uuWhen Driving uShifting
Driving
■If you want to keep the transmission in (N position [car wash mode]
With the power system on:
1. Depress the brake pedal.
2. Make sure the  READY indic HONDA CLARITY FUEL CELL 2019  Owners Manual (in English) Continued379
uuWhen Driving uShifting
Driving
■If you want to keep the transmission in (N position [car wash mode]
With the power system on:
1. Depress the brake pedal.
2. Make sure the  READY indic](/manual-img/13/34492/w960_34492-380.png)
Continued379
uuWhen Driving uShifting
Driving
■If you want to keep the transmission in (N position [car wash mode]
With the power system on:
1. Depress the brake pedal.
2. Make sure the  READY indicator is on.
3. Press 
(N. Within six seconds press and hold (N for two seconds.
u This puts the vehicle in car wash mode which must be used when your vehicle 
is pulled through a conveyor type automatic car wash where you or an 
attendant do not remain in the vehicle.
If you want to cancel car wash mode, select a position other than 
(N.
If you want to reduce fuel  consumption in car wash mode:
Press the  POWER button during car wash mode.
u Make sure the  READY indicator is off.
u The gear position remains in 
(N with the power mode in ACCESSORY for 15 
minutes, then, it auto matically changes to 
(P and the power mode changes to 
OFF.
Manually changing to 
(P cancels ACCESSORY mode. The (P indicator comes on 
and the power mode changes to OFF. You must always shift to 
(P when car wash 
mode is no longer needed.
1 If you want to keep the transmission in (N position [car wash 
mode]
To keep the vehicle in 
(N position, you can also 
follow this procedure:
While the power system is on, select 
( N, and then 
within five seconds, press the  POWER button.
Note that the transmiss ion may not stay in 
(N 
position while any of the  following indicators is on:
•POWER SYSTEM indicator
•Transmission system indicator
•12-volt battery charging system indicator
19 CLARITY FCV CSS-31TRT6200.book  379 ページ  2019年1月17日 木曜日 午前11 時54分