2019 HONDA CIVIC SEDAN bulb

[x] Cancel search: bulb

Page 5 of 679

HONDA CIVIC SEDAN 2019  Owners Manual (in English) Contents
Child Safety P. 60Exhaust Gas Hazard P. 73Safety Labels P. 74
Opening and Closing the Trunk P. 150 Security System P. 153 Opening and Closing the Windows P. 156
Operating the Switches Around

Page 88 of 679

HONDA CIVIC SEDAN 2019  Owners Manual (in English) 86
uuIndicators u
Instrument Panel
*1:Models with the smart entry system have an  ENGINE START/STOP button instead of an ignition switch.
IndicatorNameOn/BlinkingExplanationMessage
System Message 
Ind

Page 549 of 679

HONDA CIVIC SEDAN 2019  Owners Manual (in English) 547
Maintenance
This chapter discusses basic maintenance.
Before Performing MaintenanceInspection and Maintenance ............ 548
Safety When Performing Maintenance .... 549Parts and Fluids Used in M

Page 550 of 679

HONDA CIVIC SEDAN 2019  Owners Manual (in English) 548
Maintenance
Before Performing Maintenance
Inspection and Maintenance
For your safety, perform all listed inspections and maintenance to keep your vehicle 
in good condition. If you become aware of

Page 574 of 679

HONDA CIVIC SEDAN 2019  Owners Manual (in English) 572
Maintenance
Replacing Light Bulbs
Headlight Bulbs
When replacing, use the following bulbs.1.Push the tab to remove the coupler.
2. Rotate the old bulb counter-clockwise to 
remove.
3. Insert a new

Page 575 of 679

HONDA CIVIC SEDAN 2019  Owners Manual (in English) 573
uuReplacing Light Bulbs uHeadlight Bulbs
Maintenance
1. Push the tab to remove the coupler.
2. Rotate the old bulb counter-clockwise to 
remove.
3. Insert a new bulb into the headlight 
assembly a

Page 576 of 679

HONDA CIVIC SEDAN 2019  Owners Manual (in English) 574
uuReplacing Light Bulbs uFog Light Bulbs*
Maintenance
Fog Light Bulbs*
When replacing, use the following bulbs.
1.Remove the clips using a flat-tip 
screwdriver, remove the bolt, and push up 
the

Page 577 of 679

HONDA CIVIC SEDAN 2019  Owners Manual (in English) 575
uuReplacing Light Bulbs uFog Light Bulbs*
Maintenance
2. Push the tab to remove the coupler.
3. Rotate the old bulb counter-clockwise to 
remove.
4. Insert a new bulb into the fog light 
assembly
Page:   1-8 9-16 17-24 next >