Page 97 of 675

95
uuIndicators uDriver Information Interface Wa rning and Information Messages
Continued
Instrument Panel
Driver Information Interface Warning and Information Messages
The following messages appear only on the  driver information interface. Press the   (d isplay/information) button to see the message 
again with the system message indicator on.
MessageConditionExplanation
●Appears if either door or th e trunk is not completely 
closed.
●Appears if either door or  the trunk is opened while 
driving. The beeper sounds.
●Goes off when both doors  and the trunk are closed.
●Appears when the washer fluid gets low.●Refill the washer fluid.
2Refilling Window Washer Fluid  P. 569
●Appears when the scheduled maintenance is due 
soon.
●Consequently, Maintenance Due Now  and 
Maintenance Past Due  follow.
2Maintenance Minder Messages on the Driver 
Information Interface  P. 551
●Appears when there is a problem with the sensor on 
the battery.●Have your vehicle checked by a dealer.
2Checking the Battery  P. 592
●Appears along with the ba ttery charging system 
indicator when the battery is not charging.●Turn off the climate control sy stem and rear defogger to 
reduce electricity consumption.
2 If the Charging System Indicator Comes On  P. 635
●Appears when the engine coolant temperature gets 
abnormally high.
2Overheating  P. 633
Canadian models
19 CIVIC 2D HCM (KA KL KC)-31TBG6300.book  95 ページ  2018年9月4日 火曜 日 午後1時38分 
         
        
        
     
        
        Page 98 of 675
96
uuIndicators uDriver Information Interface Wa rning and Information Messages
Instrument Panel
*1:Models with the smart entry system have an  ENGINE START/STOP button instead of an ignition switch.
MessageConditionExplanation
●Appears when you turn the ignition switch to ON 
(w*1 without fastening the driver’s seat belt.
●Fasten the seat belt properly before you start to drive.
●Appears if the automatic br ake hold is automatically 
canceled while it is in operation.●Immediately depress the brake pedal.
●Appears when the automa tic brake hold system is 
turned off.
2 Automatic Brake Hold  P. 530
●Appears when the automa tic brake hold button is 
pressed without wearing the driver’s seat belt.●Fasten the driver’s seat belt.
2 Automatic Brake Hold  P. 530
Continuously 
variable transmission 
models
Manual transmission 
models
19 CIVIC 2D HCM (KA KL KC)-31TBG6300.book  96 ページ  2018年9月4日 火曜 日 午後1時38分 
         
        
        
     
        
        Page 101 of 675
99
uuIndicators uDriver Information Interface Wa rning and Information Messages
Continued
Instrument Panel
MessageConditionExplanation
●Appears after you set the power mode to 
ACCESSORY or ON.
2Starting the Engine  P. 435
●Appears when the steering wheel is locked.●Move the steering wheel left an d right while pressing the 
ENGINE START/STOP  button.
Models with smart entry system
Continuously 
variable transmission 
models
Manual transmission 
models
Except U.S. 
models with 
continuously 
variable 
transmission
19 CIVIC 2D HCM (KA KL KC)-31TBG6300.book  99 ページ  2018年9月4日 火曜 日 午後1時38分 
         
        
        
     
        
        Page 102 of 675

100
uuIndicators uDriver Information Interface Wa rning and Information Messages
Instrument Panel
MessageConditionExplanation
●Appears if you push the ENGINE START/STOP 
button to turn the engine  off without the shift lever 
in 
(P.
●Move the shift lever to (P. The power mode changes to 
VEHICLE OFF.
●Move the shift lever to (P, then press the  ENGINE 
START/STOP  button twice.
●Appears when the power mode is in ACCESSORY.
—
●Appears after the driver’s  door is opened when the 
power mode is in ACCESSORY.●Change the power mode to VEHICLE OFF.
2 ENGINE START/STOP Button  P. 161
●Appears when you close the door with the power 
mode in ON without the smart entry remote inside 
the vehicle.●Disappears when you bring the smart entry remote back 
inside the vehicle and close the door.
2Smart Entry Remote Reminder  P. 163
●Appears when the smart entry remote battery 
becomes weak.●Replace the battery as soon as possible.
2Replacing the Button Battery  P. 594
●Appears if the smart entry remote battery is too 
weak to start the engine or  the key is not within 
operating range to start the engine.
A beeper sounds six times.●Bring the smart entry remote in front of the  ENGINE 
START/STOP  button to be touched with.
2If the Smart Entry Remote Battery is Weak  P. 627
Models with smart entry system
Continuously 
variable transmission 
modelsU.S. models
Canadian models
19 CIVIC 2D HCM (KA KL KC)-31TBG6300.book  100 ページ  2018年9月4日 火 曜日 午後1時38分 
         
        
        
     
        
        Page 103 of 675
101
uuIndicators uDriver Information Interface Wa rning and Information Messages
Continued
Instrument Panel
MessageConditionExplanation
●Appears when the starter system has a problem.●As a temporary measure, press and hold the  ENGINE 
START/STOP  button for up to 15  seconds while pressing 
the brake pedal and clutch pedal (manual transmission 
only), and manually start the engine.
Have your vehicle checked by a dealer.
●Appears as soon as a problem is detected in the 
smart entry system or push button starting system.●Appears constantly  - Have your vehicle checked by a 
dealer.
MessageConditionExplanation
●Appears if there is a problem with the headlights.●Appears while driving  - The headlights may not be on. 
When conditions allow you to drive safely, have your 
vehicle checked by a deal er as soon as possible.
Models with smart entry system
U.S.
Canada
Models with LED headlights
19 CIVIC 2D HCM (KA KL KC)-31TBG6300.book  101 ページ  2018年9月4日 火 曜日 午後1時38分 
         
        
        
     
        
        Page 112 of 675
110
uuIndicators uDriver Information Interface Wa rning and Information Messages
Instrument Panel
MessageConditionExplanation
●Appears when you unlock and open the driver’s 
door while the engine is running by remote engine 
start.
2Remote Engine Start with Vehicle Feedback* P. 437
MessageConditionExplanation
●Appears if there is a problem with the adaptive 
damper system.●Have your vehicle checked by  a dealer. With this message 
appeared, your vehicle ha s normal damping ability 
without the adaptive damper feature.
●Appears if the drive mode cannot be changed due 
to certain situations, such as a system error or 
adverse driving conditions.
2 SPORT Mode* P. 451
Models with remote engine starter
Models with SPORT mode
* Not available on all models
19 CIVIC 2D HCM (KA KL KC)-31TBG6300.book  110 ページ  2018年9月4日 火 曜日 午後1時38分 
         
        
        
     
        
        Page 113 of 675

111Continued
Instrument Panel
Gauges and Driver Information Interface
Gauges
Gauges include the speedometer, tachometer, fuel gauge, and related indicators. 
They are displayed when the  ignition switch is in ON 
(w*1.
Displays your driving speed in mph or km/h.
Shows the number of engine revolutions per minute.
Displays the amount of fuel left in the fuel tank.
Displays the temperature of the engine coolant.
*1: Models with the smart entry system have an  ENGINE START/STOP button instead of an 
ignition switch.
■Speedometer
■Tachometer
■Fuel Gauge
■Temperature Gauge
1 Gauges
Press the   (display /information) button 
repeatedly until the   ic on is shown on the driver 
information interface. Press ENTER , then press and 
hold it again. The spee dometer reading and the 
displayed measurements wi ll switch between mph 
and km/h.
1 Tachometer
You can turn on or off  the tachometer display.
2 Customized Features  P. 124, 335
1Fuel Gauge
NOTICE
You should refuel when the reading approaches  .
Running out of fuel can cause  the engine to misfire, 
damaging the cata lytic converter.
The actual amount of remain ing fuel may differ from 
the fuel gauge reading.E
1 Temperature Gauge
NOTICE
Driving with the temperat ure gauge pointer in the 
upper zone can cause serious  engine damage. Pull 
safely to the side of th e road and allow engine 
temperature to return to normal.
2 Overheating  P. 633
19 CIVIC 2D HCM (KA KL KC)-31TBG6300.book  111 ページ  2018年9月4日 火 曜日 午後1時38分 
         
        
        
     
        
        Page 119 of 675

Continued117
uuGauges and Driver Information Interface uDriver Information Interface
Instrument Panel
Shows the estimated average fuel economy  of each trip meter in mpg or l/100 km. 
The display is updated at set intervals. Wh en a trip meter is reset, the average fuel 
economy is also reset.
Shows the estimated distance you can trave l on the remaining fuel. This estimated 
distance is based on the vehicle’s current fuel economy.
Shows the time elapsed since Trip A or Trip B was reset.
Shows the average speed in mph or km/h  since Trip A or Trip B was reset.
Shows the remaining oil life and Maintenance Minder
TM.
2 Maintenance MinderTM P. 549
■Average Fuel Economy
■Range
■Elapsed Time
■Average Speed
■Engine Oil Life
1Average Fuel Economy
You can change when to reset the average fuel 
economy.
2 Customized Features  P. 124, 335
1Elapsed Time
You can change when to reset the elapsed time.
2 Customized Features  P. 124, 335
1Average Speed
You can change when to reset the average speed.
2 Customized Features  P. 124, 335
19 CIVIC 2D HCM (KA KL KC)-31TBG6300.book  117 ページ  2018年9月4日 火 曜日 午後1時38分