Page 81 of 727

79
uuIndicators u
Continued
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Parking Brake 
and Brake 
System 
Indicator (Red)
•Comes on when the parking brake 
is applied, and goes off when it is 
released.
• Comes on when the brake fluid 
level is low.
• Comes on if there is a problem with 
the brake system.
• The beeper sounds and the 
indicator comes on if you drive with 
the parking brake not fully released.
• Comes on for about 30 seconds 
when you pull or push the electric 
parking brake switch when the 
power mode is in ACCESSORY or 
VEHICLE OFF.
• Stays on for about 30 seconds 
when you set the power mode to 
VEHICLE OFF while the electric 
parking brake is set.•Comes on while driving  - Make sure 
the parking brake is  released. Check the 
brake fluid level.
2 What to do when the indicator 
comes on while driving  P. 683
•Comes on along with the brake system 
indicator (amber)  -Immediately stop in a 
safe place. Contact a dealer for repair. The 
brake pedal becomes harder to operate. 
Depress the pedal further than you 
normally do.
• Comes on along with the ABS 
indicator  - Have your vehicle checked by 
a dealer.
2 If the Brake System Indicator (Red) 
Comes On or Blinks  P. 683
•Blinks and the brake system indicator 
(amber) comes on at the same time  - 
There is a problem with the electric 
parking brake system. The parking brake 
may not be set.
Avoid using the parking brake and have 
your vehicle checked by a dealer 
immediately.
2 If the Brake System Indicator (Red) 
Comes On or Blinks at the Same Time 
When the Brake System Indicator 
(Amber) Comes On  P. 684
U.S.
Canada
(Red) 
     
        
        Page 82 of 727
80
uuIndicators u
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Parking Brake 
and Brake 
System 
Indicator 
(Amber)
•Comes on if there is a problem with 
a system related to braking other 
than the conventional brake 
system.
• Comes on if there is a problem with 
the electric parking brake system.• Stays on constantly  - Have your vehicle 
checked by a dealer.
• Comes on while driving  - Avoid using 
the parking brake and have your vehicle 
checked by a dealer immediately.
U.S.
Canada
(Amber)
U.S.
Canada 
     
        
        Page 83 of 727
81
uuIndicators u
Continued
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Parking Brake 
and Brake 
System 
Indicator 
(Amber)
•Comes on if there is a problem with 
the automatic brake hold system.
2 Automatic Brake Hold  P. 577
●Comes on if there is a problem with 
the radar sensor.
●Indicator may come on temporarily 
when the Maximum Load Limit is 
exceeded.
●Make sure the total load is within the 
Maximum Load Limit.
2Maximum Load Limit  P. 457●Stays on constantly - Have your vehicle 
checked by a dealer.
—
U.S.
Canada
(Amber)
U.S.
Canada 
     
        
        Page 84 of 727
82
uuIndicators u
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Automatic 
Brake Hold 
System 
Indicator
●Comes on when the automatic 
brake hold system is on.
2Automatic Brake Hold P. 577
Automatic 
Brake Hold 
Indicator
●Comes on when the automatic 
brake hold is activated.
2Automatic Brake Hold P. 577—
U.S.
Canada 
     
        
        Page 85 of 727
83
uuIndicators u
Continued
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Malfunction 
Indicator Lamp
•After you have set the power mode 
to ON, the vehicle performs system 
checks. However, if the readiness 
codes have not been set by that 
time, this indicator will blink five 
times and then go off.
• Comes on if there is a problem with 
the emissions control system.
• Blinks when a misfire in the 
engine’s cylinders is detected.•Readiness codes are part of the on board 
diagnostics for the emissions control 
systems.
2 Testing of Readiness Codes  P. 707
•Comes on while driving  - Have your 
vehicle checked by a dealer.
• Blinks while driving  - Stop in a safe 
place where there are no flammable 
objects. Stop the engine for 10 minutes or 
more, and wait for it to cool down. Then, 
take your vehicle to a dealer.
2 If the Malfunction Indicator Lamp 
Comes On or Blinks  P. 682 
     
        
        Page 86 of 727
84
uuIndicators u
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Charging 
System 
Indicator
•Comes on when the battery is not 
charging.• Stop in a safe place and have your vehicle 
checked by a dealer immediately.
2 If the Charging System Indicator 
Comes On  P. 681
Gear Position 
Indicator*
•Indicates the current gear selection.
2 Shifting  P. 475, 482, 484—
M (sequential 
mode*/7-speed 
manual shift 
mode
*) 
Indicator*/Gear 
Selection 
Indicator
*
• Comes on when the sequential 
mode*/7-speed manual shift mode* 
is applied.
2 Sequential Mode  P. 480
2 7-Speed Manual Shift Mode  P. 486—
* Not available on all models 
     
        
        Page 87 of 727

85
uuIndicators u
Continued
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Transmission 
System 
Indicator
•The current gear selection blinks if 
the transmission system has a 
problem.•Blinks while driving  - Avoid sudden 
starts and acceleration and have your 
vehicle checked by a dealer immediately.
• The indicated current gear selection 
blinks if you cannot put the 
transmission into 
(R due to a 
transmission system failure.
• Avoid sudden starts, sudden acceleration 
and high speed, and have your vehicle 
checked by a dealer immediately.
•The indicated current gear selection 
blinks if the transmission system has 
a problem and the performance of 
the vehicle is reduced.•Avoid sudden starts, sudden acceleration 
and high speed, and have your vehicle 
checked by a dealer immediately.
•The indicated current gear selection 
blinks if the transmission system has 
a problem and the paddle shifters 
cannot be used.•Have your vehicle checked by a dealer 
immediately.
Automatic transmission models 
     
        
        Page 88 of 727
86
uuIndicators u
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Transmission 
System 
Indicator
•The current gear position or all the 
gear positions blink if there is a 
problem with the transmission and 
the vehicle is no longer able to run.• Immediately park your car in a safe place.
2 Emergency Towing  P. 693
•Have your vehicle checked by a dealer.
•The current gear position or all the 
gear positions blink if there is a 
problem with the transmission and 
it is not possible to select 
(P.
• Depending on the circumstances, you can 
set the power mode to ON as an 
emergency measure.
2 If the Transmission Indicator Blinks 
along with the Warning Message  
P. 687
• While the vehicle is  stopped, apply the 
parking brake.
• Have your vehicle checked by a dealer 
immediately.
Automatic transmission models