2019 HONDA ACCORD HYBRID seat memory

163Controls This chapter explains how to operate th e various controls necessary for driving.
Clock .................................................. 164
Locking and Unlocking the Doors
Key Types and Functions .................. 166
Low Remote Signal Strength ............ 168
Locking/Unlocking the Doors from the
Outside .......................................... 169
Locking/Unlocking the Doors from the
Inside ............................................. 176
Childproof Door Locks ..................... 178
Auto Door Locking/Unlocking .......... 179
Opening and Closing the Trunk ....... 180
Security System
Immobilizer System .......................... 183
Security System Alarm ...................... 184
Opening and Closing the Windows ..... 186 Opening and Closing the Moonroof *
..... 189
Operating the Switches Around the
Steering Wheel
ENGINE START/STOP Button............. 190
Turn Signals ..................................... 193
Light Switches.................................. 193
Fog Lights *
...................................... 195
Daytime Running Lights ................... 196
Auto High-Beam .............................. 197
Wipers and Washers ........................ 200
Rear Defogger/Heat ed Door Mirror *

Button ........................................... 202 Heated Windshield Button ............... 202
Brightness Control ........................... 203
Driving Position Memory System *
.... 205
Adjusting the Steering Wheel .......... 207
Adjusting the Mirrors
Interior Rearview Mirror ................... 208
Power Door Mirrors ......................... 209
Adjusting the Seats .......................... 210
Interior Lights/Interior Convenience
Items ................................................ 221
Climate Control System
Using Automatic Climate Control .... 239
Automatic Climate Control Sensors ... 242 Canadian models
* Not available on all models

205uu Operating the Switches Around the Steering Wheel u Driving Position Memory System *
Continued
Controls
Driving Position Memory System *You can store two driver’s seat positions (except for power lumbar) with the driving
position memory system.
When you unlock and open the driver's door with a remote transmitter, or smart
entry system to one of the two preset po sitions and the seat adjusts to retracted
positions of one of the two preset positions automatically.
The seat will move to the stored position when you set the power mode to
ACCESSORY.
When you enter the vehicle, the driver in formation interface briefly shows you which
remote transmitter you used to unlock the vehicle.
• DRIVER 1 transmitter is linked to memory button 1.
• DRIVER 2 transmitter is linked to memory button 2.
The driver’s seat moves rearward depending
on the set seating position once you
• Stop the vehicle.
• Put the transmission into ( P
.
• Turn the engine off.
• Then open the driver’s door.
Once the power mode is in the ACCESSORY
position, the driver’s seat moves forward to
the DRIVER 1 or 2 preset position. 1 Driving Position Memory System *
Using the audio/informati on screen you can disable
the automatic seat adjustment function.
2 Customized Features P. 381
The driver’s seat easy exit feature can be turned ON/
OFF.
2 Customized Features P. 381
System Operation
The system will not operate if:
• The vehicle speed is above 2 mph (3 km/h).
• Either memory position but ton is pressed while the
seat is in motion.
• The seat position is adju sted while in operation.
• The memory 1 or 2 position is set fully to the rear.DRIVER 1
DRIVER 2
* Not available on all models

uu Operating the Switches Around the Steering Wheel u Driving Position Memory System *
206
Controls 1. Set the power mode to ON. Adjust the
driver’s seat to the desired position.
2. Press the SET button.
u You will hear the beeper, and the
memory button indicator light will blink.
3. Press the memory button ( 1
or ( 2
within
five seconds of pressing the SET button.
u Once the seat position has been
memorized, the indicator light on the
button you pressed stays on and you will
hear two beeps.
1. Put the transmission into ( P
.
2. Apply the parking brake.
3. Press a memory button ( ( 1
or ( 2
).
u You will hear a beep, and the indicator
light will blink.
The seat will automatically move to the
memorized position. When it has finished
moving, you will hear a beep, and the
indicator light stays on.■ Storing a Position in Memory 1 Storing a Position in Memory
After you press the SET button, the storing operation
will be canceled when:
• You do not press the memory button within five
seconds.
• You readjust the seat position before the two
beeps.
• You set the power mode to any position except
ON.Memory
Button 1Memory
Button 2
SET Button
■ Recalling the Stored Position 1 Recalling the Stored Position
The seat will stop moving if:
• The vehicle speed is above 2 mph (3 km/h).
• You press the SET button or memory button ( 1
or
( 2
.
• You adjust the seat position.
Memory
Button 1Memory
Button 2

386 uu Customized Features u
Features Lighting Setup
Interior Ligh t Dimming TimeHeadlight Auto OFF Timer
Auto Light Sensitivity
Door/Window
Setup Auto Door Lock
Auto Door UnlockKey and Remote Unlock Mode
Keyless Lock Answer Back
Security Relock Timer
Maintenance Info.
Select Reset ItemsWalk Away Auto Lock *Driving Position
Setup *
Seat Position Movement at Entry/Exit Memory Position Link
Keyless Access
Setup Door Unlock Mode
Smart Entry Light Flash *
Smart Entry Beep *
Remote Start System ON/OFF *
Auto Headlight On with Wiper OnAuto Interior Illumi nation Sensitivity
* Not available on all models

395 uu Customized Features u
Continued
Features
*1:Default Setting Setup
Group Customizable Features Description Selectable Settings
Vehicle Driving
Position
Setup *
Memory Position
Link Turns the driving position memory system on and
off. ON *1
/ OFF
Seat Position
Movement at Entry/
Exit Moves the seat rearward when you get in/get out
of the vehicle. Changes the setting for this feature. ON *1
/ OFF
Keyless Access
Setup Door Unlock Mode Changes which doors unloc k when you grab the
driver’s door handle. Driver Door Only *1
/
All Doors
Smart Entry Light
Flash *
Causes some exterior lights to flash when you
unlock/lock the doors. ON *1
/ OFF
Smart Entry Beep *
Causes the beeper to so und when you unlock/lock
the doors. ON *1
/ OFF
Remote Start System
ON/OFF *
Turns the remote engine start feature on and off. ON *1
/ OFF
* Not available on all models