2019 HONDA ACCORD HYBRID instrument panel

159uu Gauges and Displays u Head-Up Display *
Continued
Instrument Panel
Each time you press the ( HUD ) button on the steering wheel, the head-up
display content will change.
■ To Change Head-Up Display Content
Head-Up Display
Current Mode for ACC with
LSF and the LKAS, Vehicle
Speed, Traffic Sign
Recognition System Vehicle Speed, Traffic
Sign Recognition
System Tachometer, Gear Position Indicator,
M (sequential mode *
/7-speed manual
shift mode *
) Indicator/Gear Selection
Indicator, Vehicle Speed, Traffic Sign
Recognition System
Traffic Sign
Recognition System,
Vehicle Speed Turn-by-Turn
Directions, Vehicle
Speed, Traffic Sign
Recognition System Compass, Vehicle
Speed, Traffic Sign
Recognition System
( HUD )
Button
* Not available on all models

uu Gauges and Displays u Head-Up Display *
160
Instrument Panel Shows your driving speed in mph or km/h.
Shows the number of engine revolutions as a bar graph.
Shows the current gear selection.
Shows the current mode for the sequential mode *
/7-speed manual shift mode *
.
Shows the current mode for ACC with LSF and the LKAS. 2 Adaptive Cruise Control (ACC) with Low Speed Follow (LSF) *
P. 519
2 Lane Keeping Assist System (LKAS) P. 550■ Vehicle Speed
■ Tachometer
■ Gear Position Indicator
■ M (sequential mode *
/7-speed manual shift mode *
)
Indicator/Gear Selection Indicator
■ Current Mode for ACC with LSF and the LKAS 1 Vehicle Speed
Switch between mph and km/h by using the driver
information interface or cu stomized features on the
audio/information screen.
2 Speed Unit P. 149
2 Customized Features P. 381
* Not available on all models

161uu Gauges and Displays u Head-Up Display *
Instrument Panel
Shows you turn-by-turn driv ing directions to your destination linked with the
navigation system. 2 Refer to the Navigation System Manual
Shows the traffic sign recognition system. 2 Traffic Sign Recognition System P. 562
■ Turn-by-Turn Directions
■ Traffic Sign Recognition System 1 Turn-by-Turn Directions
The head-up display shows a compass when the
route guidance is not used.
You can select whether th e turn-by-turn display
comes on during the route guidance.
2 Customized Features P. 381

184 uu Security System u Security System Alarm
Controls Security System Alarm The security system alarm activates when the trunk, hood or doors are forcibly
opened. The alarm does not activate if the trunk or doors are op ened with the key,
remote transmitter, or smart entr y with push button start system *
.
However, the alarm activates if a door is opened with the key and then the
transmission is taken out of ( P
(continuously variable transmission models) or the
hood is opened before the power mode is in ON.
■ When the security sy stem alarm activates
The horn sounds intermittently, and some the exterior lights flash.
■ To deactivate the security system alarm
Unlock the vehicle using the key, remote transmitter or smart entry with push
button start system *
. The system, along with the ho rn and flashing lights, is
deactivated.
■ Setting the security system alarm
The security system alarm automatically sets when th e following conditions have
been met:
• The power mode is set to VEHICLE OFF.
• The hood and trunk are closed.
• All doors are locked from outside with the key, remote transmitter, or smart entry
with push button start system *
.
■ When the security system alarm sets
The security system alarm indicator in the instrument panel blinks and the blinking
interval changes after about 15 seconds.
■ To cancel the security system alarm
The security system alarm is canceled when the vehicle is unlocked using the key *
,
remote transmitter or smart entry with push button start system *
, or when the power
mode is set to ON. The security system alarm indicator goes off at the same time. 1 Security System Alarm
Do not alter the system or add other devices to it.
Doing so may damage the system and make your
vehicle inoperable.
The security alarm continues for a maximum of two
minutes until the security system alarm deactivates.
Do not set the security system alarm when someone
is in the vehicle or a window is open. The system can
accidentally activate when:
• Unlocking the door with the lock tab.
• Opening the trunk with the trunk opener or the
emergency trunk opener.
• Opening the hood with the hood release.
• Taking the transmission out of ( P
.
If the battery goes dead after you have set the
security system alarm, the security alarm may go off
once the battery is re charged or replaced.
If this occurs, deactivate the security system alarm by
unlocking a door using the ke y, remote transmitter,
or smart entry with push button start system *
.Continuously variable transmission models
* Not available on all models

195uu Operating the Switches Around the Steering Wheel u Fog Lights *
Controls
The headlights automatically come on when the wipers are used several times within
a certain number of intervals with the headlight switch in AUTO .
The headlights automatically go off a few mi nutes later if the wipers are stopped.
The headlights, all other exterior lights, a nd the instrument panel lights turn off 15
seconds after you set the power mode to VEHICLE OFF, take the remote with you,
and close the driver’s door.
If you set the power mode to VEHICLE OFF with the head light switch on, but do not
open the door, the lights turn off after 10 minutes (three minutes, if the switch is in
the AUTO position).
The lights turn on again when you unlock or open the driver’s door. If you unlock
the door, but do not open it within 15 seconds, the lights go off. If you open the
driver’s door, you will hear a lights on reminder chime.
Fog Lights *
When the low beam headlights are on, turn
the fog light switch on to use the fog lights.■ Headlight Integration with Wipers
■ Automatic Lighting Off Feature 1 Automatic Operation (aut omatic lighting control)
Adjust the auto light sensitivity as follows:
Setting The exterior lights come on
when the ambient light is at
MAX
HIGH
MID
LOW
MIN Bright
Dark
1 Headlight Integration with Wipers
This feature activates while the headlights are off in
AUTO .
The instrument panel br ightness does not change
when the headlights come on.
At dark ambient light leve ls, the automatic lighting
control feature turns on the headlights, regardless of
the number of wiper sweeps.
1 Automatic Lighting Off Feature
You can change the headlight auto off timer setting.
2 Customized Features P. 370, 381
Fog Light Switch
* Not available on all models

203uu Operating the Switches Around the Steering Wheel u Brightness Control
Continued
Controls
Brightness Control When the power mode is in ON, you can use
the brightness control dial to adjust
instrument panel brightness.
Brighten: Turn the dial up.
Dim: Turn the dial down.
You will hear a beeper when the brightness
reaches minimum or maximum. Several
seconds after you have adjusted the
brightness, you will be returned to the
previous screen.
■ Brightness level indicator
The brightness level is shown on the driver
information interface while you are adjusting
it.■ Adjusting the Instrument Panel Brightness 1 Brightness Control
Instrument panel brightne ss varies, depending on
whether the exterior lights are on or off. The
instrument panel dims to reduce glare when they are
on.
To cancel the reduced in strument pane l brightness
when the exterior lights ar e on, turn the dial up until
the brightness display is up to max, the beeper
sounds.
The brightness can be set differently for when the
exterior lights are on, and when they are off.Control Dial

207uu Operating the Switches Around the Steering Wheel u Adjusting the Steering Wheel
Controls
Adjusting the Steering Wheel The steering wheel height and distance from your body can be adjusted so that you
can comfortably grip the steering wheel in an appropriate driving posture.
1. Push the steering wheel adjustment lever
down.
u The steering wheel adjustment lever is
under the steering column.
2. Move the steering wheel up or down, and
in or out.
u Make sure you can see the instrument
panel gauges and indicators.
3. Pull the steering wheel adjustment lever up
to lock the steering wheel in position.
u After adjusting the position, make sure
you have securely locked the steering
wheel in place by trying to move it up,
down, in, and out. 1 Adjusting the Steering Wheel
3
WARNING Adjusting the steering wheel position while
driving may cause you to lose control of the
vehicle and be seriously injured in a crash.
Adjust the steering wheel only when the
vehicle is stopped.To adjust To lock
Lever

285uu Audio System Basic Operation u Audio/Information Screen
Features
You can edit, show, or hide the meter cont ents on the driver information interface.
1. Press the button.
2. Select Settings .
3. Select System .
4. Select Config. of Instrument Panel .
5. Select and hold the content you wish to
show or hide.
u The checked items are displayed on the
driver information interface.
■ Editing order
To change the order of the contents on th e driver information interface, first select:
1. Press the button.
2. Select Settings .
3. Select System .
4. Select Config. of Instrument Panel .
5. Select Reorder .
6. Select and hold the contents you want to
move.
7. Drag and drop the contents to where you
want it to be.
8. Select Done .■ Customizing the Meter 1 Customizing the Meter
You can store up to three customized configurations.
To select or customize a configuration, select Select
configuration. .
When you select Select configuration. during
customization, the settings you changed will be
saved.