2019 GENESIS G90 light

[x] Cancel search: light

Page 344 of 517

GENESIS G90 2019  Owners Manual 5-83
05
Smart Cruise Control Speed
To set Smart Cruise Controlspeed
1. Push the CRUISE button on the
steering wheel to turn the system
on. The cruise ( ) indi-
cator will illuminate.
2. Accelerate to

Page 348 of 517

GENESIS G90 2019  Owners Manual 5-87
05
To resume Smart Cruise Controlset speed
If any method other than the cruise
toggle switch was used to cancel
cruising speed and the system is still
activated, the cruising speed will
automatic

Page 361 of 517

GENESIS G90 2019  Owners Manual 5-100
Driving your vehicle
System Malfunction
When the "Check System" warning
message appears, the system is not
working properly. In this case, have
the vehicle inspected by an author-
ized retailer

Page 363 of 517

GENESIS G90 2019  Owners Manual 5-102
Driving your vehicle
Hazardous Driving Conditions
When hazardous driving elements
are encountered such as water,
snow, ice, mud and sand, take the
below suggestions:
 Drive cautiously and keep a

Page 364 of 517

GENESIS G90 2019  Owners Manual 5-103
05
Information 
The ESC system must be turned OFF
before rocking the vehicle. 
If you are still stuck after rocking
the vehicle a few times, have the
vehicle pulled out by a tow vehicle
to avoid

Page 366 of 517

GENESIS G90 2019  Owners Manual 5-105
05
The severe weather conditions of winter quickly wear out tires and cause
other problems. To minimize winter driving problems, you should take the fol-
lowing suggestions:
Snow or Icy Conditio

Page 377 of 517

GENESIS G90 2019  Owners Manual The hazard warning flasher serves
as a warning to other drivers to exer-
cise extreme caution when approach-
ing, overtaking, or passing your vehi-
cle.
It should be used whenever emer-
gency repairs

Page 379 of 517

GENESIS G90 2019  Owners Manual If the Engine Doesnt Turn
Over or Turns Over Slowly 
 Be sure the shift lever is in N(Neutral) or P (Park). The engine
starts only when the shift lever is in
N (Neutral) or P (Park).
 Turn on the int