2019 FORD TRANSIT CONNECT service

[x] Cancel search: service

Page 286 of 493

FORD TRANSIT CONNECT 2019  Owners Manual Front Interior LED Lamps
Note:
If your vehicle has LED lamps these
are not serviceable items, see an authorized
dealer if they fail.
Reading Lamps 1. Carefully remove the lamp.
2.
Turn the bulb holder

Page 287 of 493

FORD TRANSIT CONNECT 2019  Owners Manual CHANGING THE ENGINE AIR
FILTER - 2.0L DURATEC-HE
(MI4)/2.0L FLEX FUEL, 1.5L
DURATORQ-TDCI DIESEL
WARNING: To reduce the risk of
vehicle damage and personal burn injuries,
do not start your engine with

Page 305 of 493

FORD TRANSIT CONNECT 2019  Owners Manual •
Regularly check the tire pressure until
the sealed tire is repaired or replaced
by a tire specialist. Before the tire is
removed from the rim, you must inform
the tire specialist that the tire con

Page 308 of 493

FORD TRANSIT CONNECT 2019  Owners Manual Information on P Type Tires
P215/65R15 95H is an example of
a tire size, load index and speed
rating. The definitions of these
items are listed below. (Note that
the tire size, load index and speed
ra

Page 311 of 493

FORD TRANSIT CONNECT 2019  Owners Manual A.
LT: Indicates a tire, designated
by the Tire and Rim Association
(T&RA), that is intended for
service on light trucks.
B. Load Range and Load
Inflation Limits:
 Indicates the
tire's load-carryi

Page 312 of 493

FORD TRANSIT CONNECT 2019  Owners Manual R: Indicates a radial type tire.
E. 16:
 Indicates the wheel or rim
diameter in inches. If you change
your wheel size, you will have to
purchase new tires to match the
new wheel diameter.
Location of

Page 317 of 493

FORD TRANSIT CONNECT 2019  Owners Manual When inflating the tire for
mounting pressures up to 20 psi
(1.38 bar) greater than the
maximum pressure on the tire
sidewall, the following
precautions must be taken to
protect the person mounting th

Page 321 of 493

FORD TRANSIT CONNECT 2019  Owners Manual This device complies with Part 15 of the
FCC Rules and with License exempt RSS
Standards of Industry Canada. Operation
is subject to the following two conditions:
1. This device may not cause harmful