2019 FORD MUSTANG homelink

UNIVERSAL GARAGE DOOR
OPENER
HomeLink Wireless Control
System
WARNING: Make sure that the
garage door and security device are free
from obstruction when you are
programming. Do not program the
system with the vehicle in the garage. WARNING:
Do not use the system
with any garage door opener that does
not have the safety stop and reverse
feature as required by U.S. Federal
Safety Standards (this includes any
garage door opener manufactured
before April 1, 1982). A garage door
opener which cannot detect an object,
signaling the door to stop and reverse,
does not meet current federal safety
standards. Using a garage door opener
without these features increases the risk
of serious injury or death.
Note: Make sure you keep the original
remote control transmitter for use in other
vehicles as well as for future system
programming.
Note: We recommend that upon the sale
or lease termination of your vehicle, you
erase the programmed function buttons for
security reasons. See Erasing the Function
Button Codes
later in this section.
Note: You can program a maximum of
three devices. To change or replace any of
the three devices after it has been initially
programmed, you must first erase the
current settings. See Erasing the Function
Button Codes
. The universal garage door opener replaces
the common hand-held garage door
opener with a three-button transmitter
integrated into the driver
’s sun visor.
The system includes two primary features,
a garage door opener and a platform for
remote activation of devices within the
home. You can program garage doors as
well as entry gate operators, security
systems, entry door locks and home or
office lighting.
Additional system information can be
found online at www.homelink.com,
www.youtube.com/user/HomeLinkGentex
or by calling the toll-free help line at
1-800-355-3515.
In-Vehicle Programming
This process is to program your in-vehicle
HomeLink function button with your
hand-held transmitter.
Note: The programming steps below
assume you will be programming HomeLink
that was not previously programmed. If your
HomeLink was previously programmed, you
may need to erase your HomeLink buttons.
See
Erasing the Function Button Codes.
Note: Put a new battery in the hand-held
transmitter. This helps ensure quicker
training and accurate transmission of the
radio-frequency signal.
124
Mustang (CZG) Canada/United States of America, Vehicles Built From: 14-05-2018, enUSA, Edition date: 201804, Second-Printing Garage Door Opener
(If Equipped)E188211

1.
With your vehicle parked outside of the
garage, switch your ignition to the on
position, but do not start your vehicle.
2. Press and release the function button that you would like to program.
3. Hold your hand-held garage door transmitter 1– 3 in (2–8 cm) away from
the HomeLink button you want to
program.
4. Press and hold the hand-held transmitter button you want to
program while watching the indicator
light on HomeLink. Continue to hold
the hand-held button until the
HomeLink indicator light flashes rapidly
or is continuously on.
Note: You may need to use a different
method if you live in Canada or have
difficulties programming your gate operator
or garage door opener. See
Gate Operator
/ Canadian Programming.
5. Press and hold the HomeLink button you programmed for two seconds, then
release. You may need to do this twice
to activate the door. If your garage door
does not operate, watch the HomeLink
indicator light.
If the indicator light stays on, the
programming is complete. Your device
should activate when the HomeLink
button is pressed and released. If the indicator light flashes rapidly, press
and hold for two seconds and release the
programmed HomeLink button. Repeat
the "press/hold/release" sequence up to
three times to complete the programming
process. If your device still does not
operate, you must program your garage
door. See
Programming Your Garage
Door Opener Motor.
To program additional buttons, repeat
Steps 1 – 4.
For questions or comments, please contact
HomeLink at www.homelink.com,
www.youtube.com/user/HomeLinkGentex
or by calling the toll-free help line at
1-800-355-3515.
Programming Your Garage Door
Opener Motor
Note: You may need a ladder to reach the
unit and you may need to remove the cover
or lamp lens on your garage door opener. 1. Press the learn button on the garage
door opener motor and then you have
30 seconds to complete the next two
steps.
2. Return to your vehicle.
125
Mustang (CZG) Canada/United States of America, Vehicles Built From: 14-05-2018, enUSA, Edition date: 201804, Second-Printing Garage Door Opener
(If Equipped)E188212 E142659

3.
Press and hold the function button you
want to program for 2 seconds, then
release. Repeat this step. Depending
on your brand of garage door opener,
you may need to repeat this sequence
a third time.
Gate Operator / Canadian
Programming
Canadian radio-frequency laws require
transmitter signals to “time-out” (or quit)
after several seconds of transmission –
which may not be long enough for
HomeLink to pick up the signal during
programming. Similar to this Canadian law,
some U.S. gate operators are designed to
“time-out” in the same manner.
Note: If programming a garage door opener
or gate operator, it is advised to unplug the
device during the “cycling” process to
prevent possible overheating.
1. Press and release, every two seconds,
your hand-held transmitter until the
HomeLink indicator light changes to a
rapidly blinking or continuously on light.
2. Release the hand-held transmitter button.
3. Continue programing HomeLink. See In-Vehicle Programming, Step 4.
Erasing the Function Button Codes
Note: You cannot erase individual buttons. 1. Press and hold the outer two function
buttons simultaneously for
approximately 10 seconds until the
indicator light above the buttons
flashes rapidly.
2. When the indicator light flashes, release the buttons. You erased the
codes for all buttons.
Reprogramming a Single Button
To program a device to a previously trained
button, follow these steps:
1. Press and hold the desired button. Do NOT release the button.
2. The indicator light begins to flash after
20 seconds. Without releasing the
button, follow Step 1 in the
Programming section.
For questions or comments, contact
HomeLink at www.homelink.com,
www.youtube.com/user/HomeLinkGentex
or by calling the toll-free help line at
1-800-355-3515.
126
Mustang (CZG) Canada/United States of America, Vehicles Built From: 14-05-2018, enUSA, Edition date: 201804, Second-Printing Garage Door Opener
(If Equipped)E188212 E188213

SYNC Mobile Apps............................................
330
SYNC™............................................................324 General Information......................................... 324
SYNC™ Troubleshooting..........................333
T
Technical Specifications See: Capacities and Specifications............294
The Better Business Bureau (BBB) Auto Line Program (U.S. Only)........................215
Tire Care
..........................................................267
Glossary of Tire Terminology........................ 269
Information About Uniform Tire Quality Grading.............................................................. 267
Information Contained on the Tire Sidewall............................................................ 270
Temperature A B C............................................ 268
Traction AA A B C.............................................. 268
Treadwear............................................................ 268
Tire Inflation When Punctured See: Tire Sealant and Inflator Kit.................. 261
Tire Pressure Monitoring System..........284 Changing Tires With a Tire Pressure
Monitoring System....................................... 285
Understanding Your Tire Pressure Monitoring System ...................................... 285
Tire Repair Kit See: Tire Sealant and Inflator Kit.................. 261
Tire Sealant and Inflator Kit.....................261 First Stage: Inflating the Tire with Sealing
Compound and Air....................................... 263
General Information......................................... 262
Second Stage: Checking Tire Pressure ............................................................ 265
Tips for Use of the Kit.......................................262
What to Do After the Tire Has Been Sealed............................................................... 265
What to do When a Tire Is Punctured........................................................ 263
Tires See: Wheels and Tires...................................... 261
Towing a Trailer.............................................196 Load Placement................................................. 196
Towing the Vehicle on Four Wheels..........................................................199
Emergency Towing............................................ 199
Recreational Towing........................................ 200Towing..............................................................196
Track Use
........................................................250
........................................................................\
.......... 250
Traction Control.............................................157 Principle of Operation....................................... 157
Transmission Code Designation............299
Transmission ...................................................
147
Transporting the Vehicle............................212
Type Approvals
............................................468
China...................................................................... 478
Radio Frequency Certification for Keys and Remote Controls........................................... 478
Radio Frequency Certifications for Blind Spot Information System.......................... 476
Radio Frequency Certifications for Body Control Module.............................................. 478
Radio Frequency Certifications for Cruise Control Module.............................................. 478
Radio Frequency Certifications for Mid Range Radar................................................... 470
Radio Frequency Certifications for Passive Anti-Theft System......................................... 471
Radio Frequency Certifications for Radio Transceiver Module...................................... 474
Radio Frequency Certifications for SYNC 3........................................................................\
... 478
Radio Frequency Certifications for Tire Pressure Monitoring Sensor(s)...............468
Radio Frequency Certifications for Wireless Charging............................................................ 477
Radio Frequency Statement for Audio Unit..................................................................... 479
U
Under Hood Overview - 2.3L EcoBoost™.................................................232
Under Hood Overview - 5.0L, Bullitt.............................................................234
Under Hood Overview - 5.0L...................233
Universal Garage Door Opener................124 HomeLink Wireless Control System............124
USB Port..........................................................323
Using Adaptive Cruise Control.................167 Automatic Cancellation................................... 170
Blocked Sensor..................................................... 171
Canceling the Set Speed................................. 170
Changing the Set Speed.................................. 170
490
Mustang (CZG) Canada/United States of America, Vehicles Built From: 14-05-2018, enUSA, Edition date: 201804, Second-Printing Index