Page 151 of 248

SCHEDULED
SERVICING
Correct servicing is crucial for
guaranteeing a long life for the car
under the best conditions. For
this reason, Fiat has planned a series of
checks and services at fixed distance
and/or time intervals, as described
in the Service Schedule.
To keep the car in tip-top conditions, a
few additional checks which should
be carried out more frequently with
respect to the normal service deadlines
are listed in the Scheduled Service
plan on the previous pages.
IMPORTANT Scheduled Servicing
interventions are set out by the
Manufacturer. Failure to have them
carried out may invalidate the warranty.
We advise you to report any doubts
regarding the proper operation of the
car to your Fiat Dealership, before
waiting for the next service deadline.
REGULAR CHECKS
Every 1,000 kmor before long trips
check and, if necessary, top up:
engine coolant level;
brake fluid level;
AdBlue® (UREA) diesel emission
additive level (where present);
windscreen washer fluid level;
tyre inflation pressure and condition;
operation of lighting system
(headlights, direction indicators, hazard
warning lights, etc.);
operation of windscreen washer/
wiper system and positioning/wear of
rear window wiper blades.
Every3,000km, check and top up if
required: engine oil level.
DEMANDING USE OF THE
CAR
If the vehicle is used in one of the
following conditions:
law enforcement (or security
service), taxi service;
towing a trailer or caravan;
dusty roads;
short, repeated journeys (less than
7-8 Km) at sub-zero outdoor
temperatures;
engine often idling or driving long
distances at low speeds or long periods
of inactivity;
the following checks must be carried
out more often than indicated in the
Service Schedule:
check front disc brake pad condition
and wear;
check cleanliness of bonnet and
luggage compartment locks,
cleanliness and lubrication of linkage;
visually inspect conditions of:
engine, gearbox, transmission, pipes
and hoses (exhaust/fuel system/brakes)
and rubber elements (gaiters/sleeves/
bushes, etc.);
check battery charge and battery
fluid level (electrolyte);
visually inspect conditions of the
accessory drive belts;
check and, if necessary, change
engine oil and replace oil filter;
check and, if necessary, replace
pollen filter;
check and, if necessary, replace air
cleaner.
149
Page 153 of 248
Thousands of miles 9 18 27 36 45 54 63 72 81 90
Thousands of kilometres 15 30 45 60 75 90 105 120 135 150
Years12345678910
Use the diagnosis socket to check
supply/engine management systems
operation, emissions and, for
versions/markets, where provided,
engine oil degradation●●●●●●●●●●
Visually inspect conditions of: exterior
bodywork, underbody protection,
pipes and hoses (exhaust, fuel
system, brakes), rubber elements
(gaiters, sleeves, bushes, etc.)●●●●●
Check windscreen/rear window wiper
blade position/wear●●●●●
Check operation of the windscreen
wiper/washer system and adjust jets,
if necessary●●●●●
Check cleanliness of bonnet and
luggage compartment locks,
cleanliness and lubrication of linkage●●●●●
Check handbrake lever travel and
adjust, if necessary●●●●●
Visually inspect conditions and wear
of front disc brake pads and
operation of pad wear indicator●●●●●●●●●●
151
Page 157 of 248
Thousands of miles 12 24 36 48 60 72 84 96 108 120
Thousands of kilometres 20 40 60 80 100 120 140 160 180 200
Years12345678910
Check the AdBlue® (UREA) emission
reduction additive level and top up if
necessary.(1)
Use the diagnosis socket to check
supply/engine management systems
operation, emissions and, for
versions/markets, where provided,
engine oil degradation●●●●●●●●●●
Visually inspect conditions of: exterior
bodywork, underbody protection,
pipes and hoses (exhaust, fuel
system, brakes), rubber elements
(gaiters, sleeves, bushes, etc.)●●●●●
Check windscreen/rear window wiper
blade position/wear●●●●●
Check operation of the windscreen
wiper/washer system and adjust jets,
if necessary●●●●●
(1) Additive consumption depends on the conditions of the use of the car and is indicated by means of the symbol and a specific message on the instrument panel
display.
155
Page 160 of 248

Thousands of miles 12 24 36 48 60 72 84 96 108 120
Thousands of kilometres 20 40 60 80 100 120 140 160 180 200
Years12345678910
Replace accessory drive belt/s(2)
Replace timing drive belt (excluding
1.3 16V Multijet versions)(2)
Replace fuel filter cartridge (6)●●●
Replace air cleaner cartridge (7)●●●●●
Change the brake fluid (8)●●●●●
Replace the passenger compartment
filter (7)(O) (●)
●●●●●
(2) The maximum mileage is 120,000 km. The belt must be replaced every 6 years, regardless of distance travelled. If the vehicle is used in heavy conditions (dusty
areas, cold climates, urban driving, long periods of idling), the maximum mileage is 60,000 km. The belt must be replaced every 4 years regardless of the
mileage.
(6) If the vehicle runs on fuel with quality below the relevant European specification, this filter must be replaced every 20,000 km
(7) If the vehicle is used in dusty areas, this cleaner must be replaced every 20,000 km.
(8) The brake fluid replacement has to be done every two years, irrespective of the mileage
(O) Recommended operations
(●) Obligatory operations
158
SERVICING AND CARE
Page 172 of 248
TECHNICAL DATA
Everything you may find useful for
understanding how your vehicle
is made and works is contained in this
chapter and illustrated with data, tables
and graphics. For the enthusiasts and
the technician, but also just for those
who want to know every detail of their
car.IDENTIFICATION DATA....................171
ENGINE ..........................................172
WHEELS .........................................175
DIMENSIONS ..................................180
PERFORMANCE .............................183
WEIGHTS........................................186
REFUELLING ..................................193
FLUIDS AND LUBRICANTS ............195
FUEL CONSUMPTION AND CO2
EMISSIONS ....................................198
PRESCRIPTIONS FOR HANDLING
THE CAR AT THE END OF ITS
LIFE ................................................199
170
TECHNICAL DATA
Page 174 of 248
ENGINE
Versions 1.4 16V 95 HP
Engine code 843A1000
CycleOtto
Number and position of cylinders 4 in line
Piston bore and stroke (mm) 72.0 × 84.0
Total displacement (cm³) 1368
Compression ratio 11 ± 0.2
Maximum power (EC) (kW) 70
Maximum power (EEC) (HP) 95
corresponding engine speed (rpm) 6000
Maximum torque (EEC) (Nm) 127
Maximum torque (EEC) (kgm) 12.9
corresponding engine speed (rpm) 4500
Spark plugs NGK DCPR7E-N-10
Fuel Unleaded petrol 95 R.O.N. (EN228 specifications)
Emission level Euro 6
172
TECHNICAL DATA
Page 175 of 248
Versions 1.3 16V 95 HP Multijet
Engine code 330A1000
CycleDiesel
Number and position of cylinders 4 in line
Piston bore and stroke (mm) 69.6 × 82.0
Total displacement (cm³) 1248
Compression ratio 16.8 ± 0.4
Maximum power (EC) (kW) 70
Maximum power (EEC) (HP) 95
corresponding engine speed (rpm) 3750
Maximum torque (EEC) (Nm) 215
Maximum torque (EEC) (kgm) 21.9
corresponding engine speed (rpm) 1500
Fuel Diesel for motor vehicles (EN590 Specification)
Emission level Euro 6
173
Page 176 of 248
Versions 1.6 16V 120 HP MultiJet
Engine code940C1000
CycleDiesel
Number and position of cylinders 4 in line
Piston bore and stroke (mm) 79.5 × 80.5
Total displacement (cm³) 1598
Compression ratio 16.5 ± 0.4
Maximum power (EC) (kW) 88
Maximum power (EEC) (HP) 120
corresponding engine speed (rpm) 3750
Maximum torque (EEC) (Nm) 320
Maximum torque (EEC) (kgm) 32.6
corresponding engine speed (rpm) 1750
Fuel Diesel for motor vehicles (EN590 Specification)
Emission levelEuro 6
174
TECHNICAL DATA