2019 DODGE CHALLENGER SRT engine

[x] Cancel search: engine

Page 429 of 500

DODGE CHALLENGER SRT 2019  Owners Manual 2. Press the pencil icon and select the following optionfrom the menu:
• Set Widget: Top Left
• Set Widget: Top Right
• Set Widget: Bottom Left
• Set Widget: Bottom Right
3. After selecting a

Page 435 of 500

DODGE CHALLENGER SRT 2019  Owners Manual •Steering Wheel Angle:
Steering Wheel Angle utilizes the steering angle sensor to
measure the degree of the steering wheel relative to zero.
The zero degree measurement indicates a steering wheel
st

Page 436 of 500

DODGE CHALLENGER SRT 2019  Owners Manual •Engine Power
Shows the instantaneous power.
• Engine Torque
Shows the instantaneous torque.
• Gear (Automatic Transmission Only)
Shows the current (or pending) operating gear of the
vehicle.

Page 437 of 500

DODGE CHALLENGER SRT 2019  Owners Manual The following options can be selected:
•Pressing the STOP button will freeze the graph. Selecting
Play will clear the graph and restart the process over
• Press the “+” or “–” buttons to

Page 438 of 500

DODGE CHALLENGER SRT 2019  Owners Manual by “XXX.” Refer to the chart below for your vehicle’s
specifications:
VehicleHorsepower
Charger 6.2L 707
Challenger 6.2L 717
Challenger 6.2L High Output 797
If your vehicle is equipped with the

Page 439 of 500

DODGE CHALLENGER SRT 2019  Owners Manual Use of the black key fob limits the driver to a reduced
engine output. This information is also available within the
SRT Drive Modes interface, and can be accessed by press-
ing the “KEY FOB” butt

Page 440 of 500

DODGE CHALLENGER SRT 2019  Owners Manual Engine/
Transmis- sion Red Key/
700+ to 717/ 797 HP Black Key/
500 HP Transmis-
sion Paddle
Shifters Suspension Steering –
If
Equipped Traction
6.2L MTX X X N/A N/A X X X 6.2L ATX XXXXXI fEquipped X

Page 443 of 500

DODGE CHALLENGER SRT 2019  Owners Manual If your vehicle is equipped with a 6.4L engine, the Custom
Mode may be selected quickly by pushing the SRT button
on the instrument panel switch bank two times, or pressing
the “Custom” button on