2019 CHEVROLET VOLT park assist

2
Power Mirror Controls/Power Window Controls/Rear Windows Lock
Instrument Panel Illumination Control
Turn Signal Lever/ Exterior Lamps Control
Regen on Demand Paddle (behind steering wheel)
Voice Recognition Controls/ 5-Way Control
Audio Volume Buttons (behind steering wheel)
Power ButtonCruise Control/Forward Collision Alert/Lane Keep Assist/Heated Steering Wheel Controls
Fuel Door Release
INSTRUMENT PANEL
Brake System
Seat Belt Reminder
Airbag Readiness
High Beam Headlamps
Engine Oil Pressure
12V Charging System
Forward Collision Alert
Lane Keep Assist Warning

Engine Coolant Temperature
Security
Service Electric Parking Brake
PARK Electric Parking Brake Set
Cruise Control
Door, Hood or Hatch Open
Instrument Cluster/Driver Information Center
Windshield Wipers Lever
Tilt/Telescopic Steering Wheel Lever (on steering column)
Audio Favorite Stations Buttons
Symbols

3
Refer to your Owner’s Manual to learn about the information being relayed by the lights, gauges and indicators of the instrument cluster.
See In Brief in your Owner’s Manual.
Infotainment System
Climate Controls/Driver’s and Passenger’s Heated Seat Controls
Accessory Power Outlet/USB Ports/Auxiliary Input Jack/ SD CardF
Hazard Warning Flashers
Charging Status Indicator
Drive Mode Selector
Traction Control/Park Assist/Auto Parking AssistF Buttons
Electric Parking Brake
Low Fuel
Antilock Brake System
Lights On Reminder
Low Tire Pressure
StabiliTrak/Traction Control
Traction Control Off
StabiliTrak Off
Check Engine
Vehicle Ready
F Optional equipment

4
GETTING STARTED
REMOTE KEYLESS ENTRY (RKE)
The RKE transmitter performs several remote functions and must be inside\
the vehicle to
operate the Volt.
Keyless Access
With the RKE transmitter within 3 ft. (1 m) of the door, press the button on the door handle to unlock the door. Press it again within 5 seconds to unlock all doors.
Key Release
Press the button on the side of the transmitter to remove the key, which can be used to unlock the driver’s door.
Unlock
Press to unlock the driver’s door. Press again to unlock all doors.
Press and hold to lower all windows from outside the vehicle.
To turn the window feature on/off, select Settings > Vehicle > Remote Lock, Unlock, Start > Remote Window Operation.
Lock
Press to lock all doors.

Remote Start
Press the Lock button and then press and hold the button until the turn signal lamps flash to start the vehicle and condition the passenger cabin temperature from outside. The heat-ing or air conditioning system and rear window defogger (if needed) will turn on. Depending on conditions and vehicle personalization settings, the engine may start.
After entering the vehicle, press the brake pedal and then press the POWER button before driving.
Note:
• Press and hold the Remote Start button until the parking lamps turn off to cancel a remote start.
• Only two remote starts are allowed between ignition cycles.
• It’s RECOMMENDED to use this feature when the vehicle is plugged in to allow energy from the wall outlet to assist in getting the cabin to a comfortable temperature and to leave more battery energy for driving.
Panic Alarm
Press and release to locate the vehicle.
Press and hold for 3 seconds to sound the panic alarm.
See Keys, Doors and Windows in your Owner’s Manual.
POWER BUTTON
The Volt features an electronic pushbutton start. The POWER button flashes when the driver’s door is opened upon entry. Once the vehicle is ON, the butto\
n illuminates.
Note: The air conditioning compressor, pumps and fan may run at any time, even when the vehicle is OFF, to cool or warm the propulsion battery.
See Driving and Operating in your Owner’s Manual.

5
STARTING THE VEHICLE/ON
With the vehicle in Park or Neutral, press the brake pedal and then press the POWER button. A power ON audio cue will sound.
The vehicle will not shift out of Park and a Charge Cord Connected message will display if the vehicle is still plugged in.
When ON, the instrument cluster will display a green READY READY icon on the instrument cluster. The engine will start only if needed.
STOPPING THE VEHICLE/OFF
Shift to Park and then press the POWER button. A power OFF audio cue will sound.
CONDITIONS FOR ENGINE STARTING
When vehicle power is ON, the engine may start independent of the vehicl\
e being plugged in or completely charged. Conditions that may cause the engine t\
o start include:
• Propulsion battery charge is low
• Propulsion battery temperature is hot or cold
• Cold ambient temperatures (depending on engine-assisted heating options\
; see Vehicle Personalization on page 10)
• Hood is open
• Engine and Fuel Maintenance Modes (occur only if the engine has had ver\
y limited operation over a long period)
See Driving and Operating in your Owner’s Manual.
GETTING STARTED
MANUAL SEAT ADJUSTMENT
A. Seat Adjustment Lift the handle to slide the seat.
B. Seat Height Adjustment Ratchet the lever to raise/lower the seat.
C. Seatback Recline Adjustment Lift the lever to move the seatback.
POWER SEAT ADJUSTMENTF
A. Seat Adjustment
Move the control to move or raise/lower the seat.
B. Seatback Adjustment
Move the control to move the seatback.
C. Lumbar Adjustment
Move the control to adjust lumbar support.
See Seats and Restraints in your Owner’s Manual.
A
C
C
B
B
A