2019 CHEVROLET LOW CAB FORWARD oil type

Chevrolet Low Cab Forward 5.2L Diesel Engine 4500/5500 Series (GMNA-
Localizing-U.S.-12407814) - 2019 - crc - 12/13/17
358 Technical Data
Valve clearanceBoth intake and exhaust valves:
0.6 mm (0.024 in) in cold engine
Idling speed 550–600 r/min
Fan belt tension New belt: 5–7 mm (0.20–0.28 in)/184–206 Hz
When used: 8–9 mm (0.31–0.35 in)/158–170 Hz
Oil filter Cartridge (spin on) type
Engine oil capacity When changing oil and filter:
11.0 L (11.6 qt)
*1
Engine coolant capacity 19.6 L (20.7 qt)*2
Preheating system Glow plugs
Transmission Specifications
A465 Model –Six-speed automatic transmission (overdrive gear for 5th and 6th), lock-up clutch for 2nd to 6th
Gear Ratio 1st 3.742 to 1
2nd 2.003 to 1 3rd 1.343 to 14th 1.000 to 1
5th 0.773 to 1
6th 0.634 to 1
Reverse 3.539 to 1
Transmission oil capacity 13.1 L (27.7 pt)

Chevrolet Low Cab Forward 5.2L Diesel Engine 4500/5500 Series (GMNA-
Localizing-U.S.-12407814) - 2019 - crc - 12/13/17
362 Technical Data
Parking Brake
Lever effective stroke (Under pull force of approx. 147 N (15 kg/33 lb) 6–8 notches
Electrical System
Battery type [BCI size] (RC-CCA) x No. of units 31T (160–750) x 2
*7
Starter
12 V/3.0 kw
Alternator 12 V/140 amp
Tightening Torque
Oil pan drain plug 83.3Y(8.5 kgf m/61.0 lb ft)
Oil filter drain plug —
Oil filter —
Oil filter cartridge 63.7Y(6.5 kgf m/47.0 lb ft)
Remarks:
*1see Engine Oil 0245.
Remarks:*2see Engine Coolant 0253.
Remarks:*3see Automatic Transmission Fluid 0251.
Remarks:*4see Rear Axle (Gear Oil Viscosity Chart) 0271 orRear Axle (Oil Level Check) 0272.
Remarks:*5only for vehicles equipped with optional limited slip differential.
Remarks:*6The fuel tank capacity is stated on a metal plate attached to the fuel tank body. Only fill the tank to
95 percent of its capacity; this allows room for the expansion of the fuel.
Remarks:
*7larger capacity batteries 31 (180-930) × 2 can also be used. However, do not mix batteries of different
types and from different makers.

Chevrolet Low Cab Forward 5.2L Diesel Engine 4500/5500 Series (GMNA-
Localizing-U.S.-12407814) - 2019 - crc - 12/13/17
Technical Data 363
Engine Drive Belt Routing
Fan Belt and Air Conditioning
Compressor Belt
See theMaintenance Schedule
0 327.
No. Name
1 Fan belt
2 Fan pulley
3 A/C belt
4 A/C compressor
5 Tension pulley
6 Crank pulley No.
Name
7 Alternator
If your air conditioning system is
functioning properly, it is not
necessary to remove and replace
the refrigerant or compressor oil.
. A V-ribbed belt is used for the
fan belt. This type of belt
requires the tension to be
adjusted more accurately than is
required with the conventional V
belt. Inappropriate tension could
cause the belt to make noise or
break. When the fan belt is
damaged, electricity is not
properly generated or becomes
a cause of engine overheating.
You must check the tension of
the fan belt carefully.
. Use dealer-certified genuine
parts when changing the
fan belt.
. Have the vehicle inspected and
serviced at your dealer. .
The air conditioning drive belt,
if equipped, must be adjusted
after fan belt adjustment. If the
belt is not adjusted properly, the
A/C belt may experience
excessive tension, and possible
premature failure.