2019 Alfa Romeo Stelvio Seatbelt

forwards automatically. If necessary,
accompany the backrest during the initial
stage of tilting.
It is also possible to disengage sections
of the rear seat from inside the luggage
compartment using one of the two levers
located under the rear seat fig. 19. Each
lever folds down the section of the
backrest on the same side.Repositioning the backrests
12)
Move the seatbelts to the side, making
sure that they are correctly extended and
not twisted and that they are not trapped
behind the backrests of the seats, then
lift the backrests pushing them back until
you hear the locking click on both
attachment mechanisms.
WARNING
9)All adjustments must be made with the
car stationary.
10)Once you have released the adjustment
lever, always check that the seat is locked on
the guides by trying to move it back and
forth. If the seat is not locked into place, it
may unexpectedly slide and cause the driver
to lose control of the car.
11)Always make sure that all those on
board the car are seated and are wearing
their seat belts correctly.
12)Make sure the backrests are properly
secured at both sides to prevent them from
moving forward, in the event of sharp
braking, with possible impact with of the
passengers.
IMPORTANT
4)The fabric upholstery of the seats has
been designed to withstand long-term wear
deriving from normal use of the car. Some
precautions are however required. Avoid
prolonged and/or excessive rubbing against
clothing accessories such as metal buckles
and Velcro strips which, by applying a high
pressure on the fabric in a small area, could
cause it to break, thereby damaging the
upholstery.
5)Do not place any kind of items under the
electrically adjusted seats as they could
impede their movement or otherwise
damage the controls.
6)Before tilting the backrest, remove any
objects on the seat cushion.
1804066V0009EM
1904066V0007EM
22
KNOWING YOUR CAR

The chapter that you are about to read is very important: it
describes the safety systems with which the vehicle is equipped
and provides instructions on how to use them correctly.
SAFETY
ACTIVE SAFETY SYSTEMS........................72
DRIVING ASSISTANCE SYSTEMS....................76
OCCUPANT PROTECTION SYSTEMS..................86
SEATBELTS..................................86
SBA (Seat Belt Alert) SYSTEM......................88
PRE-TENSIONERS..............................89
CHILD PROTECTION SYSTEMS......................91
SUPPLEMENTARY RESTRAINT SYSTEM (SRS) - AIRBAG.....103

Group Weight range
Group 348.5 - 79.4 lb (22 -
36 kg) in weight
The ECE-R44 standard was recently
paired with the ECE R-129 regulation,
which defines the characteristics of the
new i-Size child restraint systems (see
the "Suitability of passenger seats for
i-Size child restraint system use"
paragraph for more information).
All restraint devices must bear the
type-approval data, together with the
control mark, on a label solidly fixed to
the child restraint system which must
never be removed.
Lineaccessori includes child restraint
systems for each weight group. These
devices are recommended having been
specifically tested for Alfa Romeo cars.
IMPORTANT For correct installation on
the car, some universal child restraint
systems require an accessory (base) sold
separately by the restraint system's
producer. Therefore, FCA advises
customers to check that their chosen
child restraint system can be installed on
their vehicle by performing a trial
installation, on the vendor's premises,
before purchase.INSTALLING A CHILD CARSEAT WITH
SEATBELTS
78) 79) 80) 81)
The Universal child restraint systems
installed with the seat belts only are
type-approved on the basis of the ECE
R44 standard and are divided into
various weight groups.
IMPORTANT The figures are indicative
and provided for assembly purposes
only. Fit the child restraint system
according to the instructions, which must
be included.
Group 0 and 0+
Babies up to 28.7 lb (13 kg) must be
carried with a rear facing child restraint
system of a type as shown in
fig. 79 which, supporting the head, does
not induce stress on the neck in the event
of sudden decelerations.The child restraint system is secured by
the vehicle seat belts, as shown in
fig. 79 and it must restrain the child in
turn with its own belts.
Group 1
From 20 to 40 lb (9 to 18 kg), children
can be transported facing forward
fig. 80.
7906086V0001EM
8006086V0002EM
92
SAFETY

Group 2
Children from 33 to 55 lb (15 to 25 kg)
can be held directly by the car's seatbelts
fig. 81.
In this case, the child restraint system is
used to position the child correctly with
respect to the seat belts so that the
diagonal belt section crosses the child’s
chest and not the neck, and the lower part
is snug on the pelvis not the abdomen.Group 3
For children from 48.5 to 79.4 lb (22 to
36 kg), there are restraining devices that
allow the seatbelts to pass through
properly.
The fig. 82 shows the correct child
positioning on the rear seat.
The fig. 82 shows the correct child
positioning on the rear seat.
Children over 4.9 ft (1.50 m) tall wear
seatbelts like adults.
8106086V0003EM
8206086V0004EM
93